diff mbox

[net-next,v2,03/71] amd: Move AMD (Lance) chipset drivers

Message ID 1312082850-24914-4-git-send-email-jeffrey.t.kirsher@intel.com
State RFC, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T July 31, 2011, 3:26 a.m. UTC 
Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/
and the necessary Kconfig and Makfile changes.

The au1000 (Alchemy) driver was also moved into the same directory
even though it is not a "Lance" driver.

CC: Peter Maydell <pmaydell@chiark.greenend.org.uk>
CC: Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Donald Becker <becker@scyld.com>
CC: Sam Creasey <sammy@users.qual.net>
CC: Miguel de Icaza <miguel@nuclecu.unam.mx>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Don Fry <pcnet32@frontier.com>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: David Davies <davies@maniac.ultranet.com>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Pete Popov <ppopov@embeddedalley.com>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: "Roger C. Pao" <rpao@paonet.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                      |    4 +-
 drivers/net/Kconfig                              |  153 ------------------
 drivers/net/Makefile                             |   14 --
 drivers/net/arm/Kconfig                          |    7 -
 drivers/net/arm/Makefile                         |    1 -
 drivers/net/ethernet/Kconfig                     |    1 +
 drivers/net/ethernet/Makefile                    |    1 +
 drivers/net/{ => ethernet/amd}/7990.c            |    0
 drivers/net/{ => ethernet/amd}/7990.h            |    0
 drivers/net/ethernet/amd/Kconfig                 |  188 ++++++++++++++++++++++
 drivers/net/ethernet/amd/Makefile                |   20 +++
 drivers/net/{ => ethernet/amd}/a2065.c           |    0
 drivers/net/{ => ethernet/amd}/a2065.h           |    0
 drivers/net/{arm => ethernet/amd}/am79c961a.c    |    0
 drivers/net/{arm => ethernet/amd}/am79c961a.h    |    0
 drivers/net/{ => ethernet/amd}/amd8111e.c        |    0
 drivers/net/{ => ethernet/amd}/amd8111e.h        |    0
 drivers/net/{ => ethernet/amd}/ariadne.c         |    0
 drivers/net/{ => ethernet/amd}/ariadne.h         |    0
 drivers/net/{ => ethernet/amd}/atarilance.c      |    0
 drivers/net/{ => ethernet/amd}/au1000_eth.c      |    0
 drivers/net/{ => ethernet/amd}/au1000_eth.h      |    0
 drivers/net/{ => ethernet/amd}/declance.c        |    0
 drivers/net/{ => ethernet/amd}/depca.c           |    0
 drivers/net/{ => ethernet/amd}/depca.h           |    0
 drivers/net/{ => ethernet/amd}/hplance.c         |    0
 drivers/net/{ => ethernet/amd}/hplance.h         |    0
 drivers/net/{ => ethernet/amd}/lance.c           |    0
 drivers/net/{ => ethernet/amd}/mvme147.c         |    0
 drivers/net/{ => ethernet/amd}/ni65.c            |    0
 drivers/net/{ => ethernet/amd}/ni65.h            |    0
 drivers/net/{pcmcia => ethernet/amd}/nmclan_cs.c |    0
 drivers/net/{ => ethernet/amd}/pcnet32.c         |    0
 drivers/net/{ => ethernet/amd}/sun3lance.c       |    0
 drivers/net/{ => ethernet/amd}/sunlance.c        |    0
 drivers/net/pcmcia/Kconfig                       |    9 -
 drivers/net/pcmcia/Makefile                      |    1 -
 37 files changed, 212 insertions(+), 187 deletions(-)
 rename drivers/net/{ => ethernet/amd}/7990.c (100%)
 rename drivers/net/{ => ethernet/amd}/7990.h (100%)
 create mode 100644 drivers/net/ethernet/amd/Kconfig
 create mode 100644 drivers/net/ethernet/amd/Makefile
 rename drivers/net/{ => ethernet/amd}/a2065.c (100%)
 rename drivers/net/{ => ethernet/amd}/a2065.h (100%)
 rename drivers/net/{arm => ethernet/amd}/am79c961a.c (100%)
 rename drivers/net/{arm => ethernet/amd}/am79c961a.h (100%)
 rename drivers/net/{ => ethernet/amd}/amd8111e.c (100%)
 rename drivers/net/{ => ethernet/amd}/amd8111e.h (100%)
 rename drivers/net/{ => ethernet/amd}/ariadne.c (100%)
 rename drivers/net/{ => ethernet/amd}/ariadne.h (100%)
 rename drivers/net/{ => ethernet/amd}/atarilance.c (100%)
 rename drivers/net/{ => ethernet/amd}/au1000_eth.c (100%)
 rename drivers/net/{ => ethernet/amd}/au1000_eth.h (100%)
 rename drivers/net/{ => ethernet/amd}/declance.c (100%)
 rename drivers/net/{ => ethernet/amd}/depca.c (100%)
 rename drivers/net/{ => ethernet/amd}/depca.h (100%)
 rename drivers/net/{ => ethernet/amd}/hplance.c (100%)
 rename drivers/net/{ => ethernet/amd}/hplance.h (100%)
 rename drivers/net/{ => ethernet/amd}/lance.c (100%)
 rename drivers/net/{ => ethernet/amd}/mvme147.c (100%)
 rename drivers/net/{ => ethernet/amd}/ni65.c (100%)
 rename drivers/net/{ => ethernet/amd}/ni65.h (100%)
 rename drivers/net/{pcmcia => ethernet/amd}/nmclan_cs.c (100%)
 rename drivers/net/{ => ethernet/amd}/pcnet32.c (100%)
 rename drivers/net/{ => ethernet/amd}/sun3lance.c (100%)
 rename drivers/net/{ => ethernet/amd}/sunlance.c (100%)

Comments

Geert Uytterhoeven July 31, 2011, 8:14 a.m. UTC | #1 
On Sun, Jul 31, 2011 at 05:26, Jeff Kirsher <jeffrey.t.kirsher@intel.com> wrote:
> --- /dev/null
> +++ b/drivers/net/ethernet/amd/Kconfig
> @@ -0,0 +1,188 @@
> +#
> +# AMD network device configuration
> +#
> +
> +config NET_VENDOR_AMD
> +       bool "AMD devices"
> +       depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
> +                  SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
> +                  (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA

Do you really need this big dependency? It will be true in almost all
cases anyway,
and the individual driver options are protected by other dependencies.
Just enabling this option doesn't make the kernel bigger.

> +       ---help---
> +         If you have a network (Ethernet) chipset belonging to this class,
> +         say Y.
> +
> +         Note that the answer to this question does not directly affect
> +         the kernel: saying N will just case the configurator to skip all
> +         the questions regarding AMD chipsets. If you say Y, you will be asked
> +         for your specific chipset/driver in the following questions.
> +
> +config A2065
> +       tristate "A2065 support"
> +       depends on NET_VENDOR_AMD && ZORRO

What about putting all driver sections inside "if NET_VENDOR_AMD" /
"endif", so the
individual driver configs don't need to depend on NET_VENDOR_AMD anymore?

The rest looks fine to me.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kirsher, Jeffrey T July 31, 2011, 8:30 a.m. UTC | #2 
On Sun, 2011-07-31 at 01:14 -0700, Geert Uytterhoeven wrote:
> On Sun, Jul 31, 2011 at 05:26, Jeff Kirsher <jeffrey.t.kirsher@intel.com> wrote:
> > --- /dev/null
> > +++ b/drivers/net/ethernet/amd/Kconfig
> > @@ -0,0 +1,188 @@
> > +#
> > +# AMD network device configuration
> > +#
> > +
> > +config NET_VENDOR_AMD
> > +       bool "AMD devices"
> > +       depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
> > +                  SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
> > +                  (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
> 
> Do you really need this big dependency? It will be true in almost all
> cases anyway,
> and the individual driver options are protected by other dependencies.
> Just enabling this option doesn't make the kernel bigger.

My thought behind this was from the standpoint, if I have system/arch
which is not listed here and I am using menuconfig, I would not want to
see an option listed that does not have any value or drivers which I
could select.

> 
> > +       ---help---
> > +         If you have a network (Ethernet) chipset belonging to this class,
> > +         say Y.
> > +
> > +         Note that the answer to this question does not directly affect
> > +         the kernel: saying N will just case the configurator to skip all
> > +         the questions regarding AMD chipsets. If you say Y, you will be asked
> > +         for your specific chipset/driver in the following questions.
> > +
> > +config A2065
> > +       tristate "A2065 support"
> > +       depends on NET_VENDOR_AMD && ZORRO
> 
> What about putting all driver sections inside "if NET_VENDOR_AMD" /
> "endif", so the
> individual driver configs don't need to depend on NET_VENDOR_AMD anymore?

Your right, I could have done that instead.  I saw examples of both in
the current Kconfig's and I chose this one mainly because there were
several drivers already using this model, not that it was any better
than what you are suggesting.

Personally, after doing all the work, I do like your suggestion because
it would make it easier for adding drivers in the future, where they
would not have to "remember to add the NET_VENDOR_* to the driver
Kconfig dependency.

> 
> The rest looks fine to me.
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
diff mbox

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index f77c3ac..7a8711d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -740,7 +740,7 @@  L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/mach-ebsa110/
-F:	drivers/net/arm/am79c961a.*
+F:	drivers/net/ethernet/amd/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 M:	Daniel Ribeiro <drwyrm@gmail.com>
@@ -4914,7 +4914,7 @@  PCNET32 NETWORK DRIVER
 M:	Don Fry <pcnet32@frontier.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pcnet32.c
+F:	drivers/net/ethernet/amd/pcnet32.c
 
 PCRYPT PARALLEL CRYPTO ENGINE
 M:	Steffen Klassert <steffen.klassert@secunet.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 17ef5c2..e446460 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -287,27 +287,6 @@  config BMAC
 	  To compile this driver as a module, choose M here: the module
 	  will be called bmac.
 
-config ARIADNE
-	tristate "Ariadne support"
-	depends on ZORRO
-	help
-	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
-	  Otherwise, say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ariadne.
-
-config A2065
-	tristate "A2065 support"
-	depends on ZORRO
-	select CRC32
-	help
-	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
-	  say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called a2065.
-
 config HYDRA
 	tristate "Hydra support"
 	depends on ZORRO
@@ -387,16 +366,6 @@  config MACMACE
 	  say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-config MVME147_NET
-	tristate "MVME147 (Lance) Ethernet support"
-	depends on MVME147
-	select CRC32
-	help
-	  Support for the on-board Ethernet interface on the Motorola MVME147
-	  single-board computer.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
 config MVME16x_NET
 	tristate "MVME16x Ethernet support"
 	depends on MVME16x
@@ -415,27 +384,6 @@  config BVME6000_NET
 	  in your kernel.
 	  To compile this driver as a module, choose M here.
 
-config ATARILANCE
-	tristate "Atari Lance support"
-	depends on ATARI
-	help
-	  Say Y to include support for several Atari Ethernet adapters based
-	  on the AMD Lance chipset: RieblCard (with or without battery), or
-	  PAMCard VME (also the version by Rhotron, with different addresses).
-
-config SUN3LANCE
-	tristate "Sun3/Sun3x on-board LANCE support"
-	depends on SUN3 || SUN3X
-	help
-	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
-	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
-	  here to compile in the Linux driver for this and enable Ethernet.
-	  General Linux information on the Sun 3 and 3x series (now
-	  discontinued) is at
-	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you're not building a kernel for a Sun 3, say N.
-
 config SUN3_82586
 	bool "Sun3 on-board Intel 82586 support"
 	depends on SUN3
@@ -445,14 +393,6 @@  config SUN3_82586
 	  that this driver does not support 82586-based adapters on additional
 	  VME boards.
 
-config HPLANCE
-	bool "HP on-board LANCE support"
-	depends on DIO
-	select CRC32
-	help
-	  If you want to use the builtin "LANCE" Ethernet controller on an
-	  HP300 machine, say Y here.
-
 config LASI_82596
 	tristate "Lasi ethernet"
 	depends on GSC
@@ -487,15 +427,6 @@  config XTENSA_XT2000_SONIC
 	help
 	  This is the driver for the onboard card of the Xtensa XT2000 board.
 
-config MIPS_AU1X00_ENET
-	tristate "MIPS AU1000 Ethernet support"
-	depends on MIPS_ALCHEMY
-	select PHYLIB
-	select CRC32
-	help
-	  If you have an Alchemy Semi AU1X00 based system
-	  say Y.  Otherwise, say N.
-
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
 	depends on PCI && SGI_IP27
@@ -545,19 +476,6 @@  config SH_ETH
 	  This driver supporting CPUs are:
 		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
 
-config SUNLANCE
-	tristate "Sun LANCE support"
-	depends on SBUS
-	select CRC32
-	help
-	  This driver supports the "le" interface present on all 32-bit Sparc
-	  systems, on some older Ultra systems and as an Sbus option.  These
-	  cards are based on the AMD Lance chipset, which is better known
-	  via the NE2100 cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunlance.
-
 config HAPPYMEAL
 	tristate "Sun Happy Meal 10/100baseT support"
 	depends on SBUS || PCI
@@ -616,18 +534,6 @@  config SUNVNET
 	help
 	  Support for virtual network devices under Sun Logical Domains.
 
-config LANCE
-	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-	depends on ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
-	  of this type.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called lance.  This is recommended.
-
 config NET_VENDOR_SMC
 	bool "Western Digital/SMC cards"
 	depends on ISA || MCA || EISA || MAC
@@ -963,17 +869,6 @@  config NI52
 	  To compile this driver as a module, choose M here. The module
 	  will be called ni52.
 
-config NI65
-	tristate "NI6510 support"
-	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni65.
-
 config DNET
 	tristate "Dave ethernet support (DNET)"
 	depends on NET_ETHERNET && HAS_IOMEM
@@ -999,19 +894,6 @@  config AT1700
 	  To compile this driver as a module, choose M here. The module
 	  will be called at1700.
 
-config DEPCA
-	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-	depends on ISA || EISA || MCA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:drivers/net/depca.c>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called depca.
-
 config HP100
 	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
 	depends on ISA || EISA || PCI
@@ -1230,32 +1112,6 @@  config NET_PCI
 	  will be asked for your specific card in the following questions. If
 	  you are unsure, say Y.
 
-config PCNET32
-	tristate "AMD PCnet32 PCI support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pcnet32.
-
-config AMD8111_ETH
-	tristate "AMD 8111 (new PCI lance) support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have an AMD 8111-based PCI lance ethernet card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called amd8111e.
-
 config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on NET_PCI && PCI
@@ -1777,15 +1633,6 @@  config SGISEEQ
 	  Say Y here if you have an Seeq based Ethernet network card. This is
 	  used in many Silicon Graphics machines.
 
-config DECLANCE
-	tristate "DEC LANCE ethernet controller support"
-	depends on MACH_DECSTATION
-	select CRC32
-	help
-	  This driver is for the series of Ethernet controllers produced by
-	  DEC (now Compaq) based on the AMD Lance chipset, including the
-	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
-
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c8223a1..0e06b05 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -56,7 +56,6 @@  obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
 obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-obj-$(CONFIG_SUNLANCE) += sunlance.o
 obj-$(CONFIG_SUNQE) += sunqe.o
 obj-$(CONFIG_SUNBMAC) += sunbmac.o
 obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
@@ -67,7 +66,6 @@  obj-$(CONFIG_MACE) += mace.o
 obj-$(CONFIG_BMAC) += bmac.o
 
 obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_PCNET32) += pcnet32.o
 obj-$(CONFIG_E100) += e100.o
 obj-$(CONFIG_TLAN) += tlan.o
 obj-$(CONFIG_EPIC100) += epic100.o
@@ -177,9 +175,7 @@  obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
 obj-$(CONFIG_DE600) += de600.o
 obj-$(CONFIG_DE620) += de620.o
-obj-$(CONFIG_LANCE) += lance.o
 obj-$(CONFIG_SUN3_82586) += sun3_82586.o
-obj-$(CONFIG_SUN3LANCE) += sun3lance.o
 obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
@@ -191,12 +187,10 @@  obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_ZNET) += znet.o
 obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_DEPCA) += depca.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
 obj-$(CONFIG_ATP) += atp.o
 obj-$(CONFIG_NI5010) += ni5010.o
 obj-$(CONFIG_NI52) += ni52.o
-obj-$(CONFIG_NI65) += ni65.o
 obj-$(CONFIG_AC3200) += ac3200.o 8390.o
 obj-$(CONFIG_APRICOT) += 82596.o
 obj-$(CONFIG_LASI_82596) += lasi_82596.o
@@ -210,19 +204,12 @@  obj-$(CONFIG_LP486E) += lp486e.o
 
 obj-$(CONFIG_ETH16I) += eth16i.o
 obj-$(CONFIG_ZORRO8390) += zorro8390.o
-obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
-obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_KORINA) += korina.o
 obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_DECLANCE) += declance.o
-obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_A2065) += a2065.o
 obj-$(CONFIG_HYDRA) += hydra.o
-obj-$(CONFIG_ARIADNE) += ariadne.o
 obj-$(CONFIG_CS89x0) += cs89x0.o
 obj-$(CONFIG_MACSONIC) += macsonic.o
 obj-$(CONFIG_MACMACE) += macmace.o
@@ -232,7 +219,6 @@  obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_S2IO) += s2io.o
 obj-$(CONFIG_VXGE) += vxge/
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 39e1c0d..d0c8cf2 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -2,13 +2,6 @@ 
 # Acorn Network device configuration
 #  These are for Acorn's Expansion card network interfaces
 #
-config ARM_AM79C961A
-	bool "ARM EBSA110 AM79C961A support"
-	depends on ARM && ARCH_EBSA110
-	select CRC32
-	help
-	  If you wish to compile a kernel for the EBSA-110, then you should
-	  always answer Y to this.
 
 config ARM_ETHER1
 	tristate "Acorn Ether1 support"
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 303171f..63c57be 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -3,7 +3,6 @@ 
 # Makefile for the ARM network device drivers
 #
 
-obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
 obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
 obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
 obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 18193ec..5e62efd 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -12,5 +12,6 @@  menuconfig ETHERNET
 if ETHERNET
 
 source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/amd/Kconfig"
 
 endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 07766ba..1bc2ac2 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -3,3 +3,4 @@ 
 #
 
 obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
+obj-$(CONFIG_NET_VENDOR_AMD) += amd/
diff --git a/drivers/net/7990.c b/drivers/net/ethernet/amd/7990.c
similarity index 100%
rename from drivers/net/7990.c
rename to drivers/net/ethernet/amd/7990.c
diff --git a/drivers/net/7990.h b/drivers/net/ethernet/amd/7990.h
similarity index 100%
rename from drivers/net/7990.h
rename to drivers/net/ethernet/amd/7990.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
new file mode 100644
index 0000000..f53e5b9
--- /dev/null
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -0,0 +1,188 @@ 
+#
+# AMD network device configuration
+#
+
+config NET_VENDOR_AMD
+	bool "AMD devices"
+	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
+		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
+		   (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
+	---help---
+	  If you have a network (Ethernet) chipset belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just case the configurator to skip all
+	  the questions regarding AMD chipsets. If you say Y, you will be asked
+	  for your specific chipset/driver in the following questions.
+
+config A2065
+	tristate "A2065 support"
+	depends on NET_VENDOR_AMD && ZORRO
+	select CRC32
+	---help---
+	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called a2065.
+
+config AMD8111_ETH
+	tristate "AMD 8111 (new PCI LANCE) support"
+	depends on PCI && NET_VENDOR_AMD
+	select CRC32
+	select MII
+	---help---
+	  If you have an AMD 8111-based PCI LANCE ethernet card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called amd8111e.
+
+config LANCE
+	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+	depends on ISA && ISA_DMA_API && NET_VENDOR_AMD
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+	  of this type.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lance.  This is recommended.
+
+config PCNET32
+	tristate "AMD PCnet32 PCI support"
+	depends on PCI && NET_VENDOR_AMD
+	select CRC32
+	select MII
+	---help---
+	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called pcnet32.
+
+config ARIADNE
+	tristate "Ariadne support"
+	depends on NET_VENDOR_AMD && ZORRO
+	---help---
+	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ariadne.
+
+config ARM_AM79C961A
+	bool "ARM EBSA110 AM79C961A support"
+	depends on NET_VENDOR_AMD && ARM && ARCH_EBSA110
+	select CRC32
+	---help---
+	  If you wish to compile a kernel for the EBSA-110, then you should
+	  always answer Y to this.
+
+config ATARILANCE
+	tristate "Atari LANCE support"
+	depends on ATARI && NET_VENDOR_AMD
+	---help---
+	  Say Y to include support for several Atari Ethernet adapters based
+	  on the AMD LANCE chipset: RieblCard (with or without battery), or
+	  PAMCard VME (also the version by Rhotron, with different addresses).
+
+config DECLANCE
+	tristate "DEC LANCE ethernet controller support"
+	depends on MACH_DECSTATION && NET_VENDOR_AMD
+	select CRC32
+	---help---
+	  This driver is for the series of Ethernet controllers produced by
+	  DEC (now Compaq) based on the AMD LANCE chipset, including the
+	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+config DEPCA
+	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+	depends on NET_VENDOR_AMD && (ISA || EISA || MCA)
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:drivers/net/depca.c>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called depca.
+
+config HPLANCE
+	bool "HP on-board LANCE support"
+	depends on DIO && NET_VENDOR_AMD
+	select CRC32
+	---help---
+	  If you want to use the builtin "LANCE" Ethernet controller on an
+	  HP300 machine, say Y here.
+
+config MIPS_AU1X00_ENET
+	tristate "MIPS AU1000 Ethernet support"
+	depends on MIPS_ALCHEMY
+	select PHYLIB
+	select CRC32
+	---help---
+	  If you have an Alchemy Semi AU1X00 based system
+	  say Y.  Otherwise, say N.
+
+config MVME147_NET
+	tristate "MVME147 (LANCE) Ethernet support"
+	depends on MVME147 && NET_VENDOR_AMD
+	select CRC32
+	---help---
+	  Support for the on-board Ethernet interface on the Motorola MVME147
+	  single-board computer.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config PCMCIA_NMCLAN
+	tristate "New Media PCMCIA support"
+	depends on NET_VENDOR_AMD && PCMCIA
+	help
+	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
+	  PCMCIA (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called nmclan_cs.  If unsure, say N.
+
+config NI65
+	tristate "NI6510 support"
+	depends on NET_VENDOR_AMD && ISA && ISA_DMA_API
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni65.
+
+config SUN3LANCE
+	tristate "Sun3/Sun3x on-board LANCE support"
+	depends on (SUN3 || SUN3X) && NET_VENDOR_AMD
+	---help---
+	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
+	  here to compile in the Linux driver for this and enable Ethernet.
+	  General Linux information on the Sun 3 and 3x series (now
+	  discontinued) is at
+	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you're not building a kernel for a Sun 3, say N.
+
+config SUNLANCE
+	tristate "Sun LANCE support"
+	depends on SBUS && NET_VENDOR_AMD
+	select CRC32
+	---help---
+	  This driver supports the "le" interface present on all 32-bit Sparc
+	  systems, on some older Ultra systems and as an Sbus option.  These
+	  cards are based on the AMD LANCE chipset, which is better known
+	  via the NE2100 cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunlance.
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
new file mode 100644
index 0000000..175caa5
--- /dev/null
+++ b/drivers/net/ethernet/amd/Makefile
@@ -0,0 +1,20 @@ 
+#
+# Makefile for the AMD network device drivers.
+#
+
+obj-$(CONFIG_A2065) += a2065.o
+obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
+obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
+obj-$(CONFIG_ARIADNE) += ariadne.o
+obj-$(CONFIG_ATARILANCE) += atarilance.o
+obj-$(CONFIG_DECLANCE) += declance.o
+obj-$(CONFIG_DEPCA) += depca.o
+obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
+obj-$(CONFIG_LANCE) += lance.o
+obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
+obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
+obj-$(CONFIG_NI65) += ni65.o
+obj-$(CONFIG_PCNET32) += pcnet32.o
+obj-$(CONFIG_SUN3LANCE) += sun3lance.o
+obj-$(CONFIG_SUNLANCE) += sunlance.o
diff --git a/drivers/net/a2065.c b/drivers/net/ethernet/amd/a2065.c
similarity index 100%
rename from drivers/net/a2065.c
rename to drivers/net/ethernet/amd/a2065.c
diff --git a/drivers/net/a2065.h b/drivers/net/ethernet/amd/a2065.h
similarity index 100%
rename from drivers/net/a2065.h
rename to drivers/net/ethernet/amd/a2065.h
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
similarity index 100%
rename from drivers/net/arm/am79c961a.c
rename to drivers/net/ethernet/amd/am79c961a.c
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
similarity index 100%
rename from drivers/net/arm/am79c961a.h
rename to drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
similarity index 100%
rename from drivers/net/amd8111e.c
rename to drivers/net/ethernet/amd/amd8111e.c
diff --git a/drivers/net/amd8111e.h b/drivers/net/ethernet/amd/amd8111e.h
similarity index 100%
rename from drivers/net/amd8111e.h
rename to drivers/net/ethernet/amd/amd8111e.h
diff --git a/drivers/net/ariadne.c b/drivers/net/ethernet/amd/ariadne.c
similarity index 100%
rename from drivers/net/ariadne.c
rename to drivers/net/ethernet/amd/ariadne.c
diff --git a/drivers/net/ariadne.h b/drivers/net/ethernet/amd/ariadne.h
similarity index 100%
rename from drivers/net/ariadne.h
rename to drivers/net/ethernet/amd/ariadne.h
diff --git a/drivers/net/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
similarity index 100%
rename from drivers/net/atarilance.c
rename to drivers/net/ethernet/amd/atarilance.c
diff --git a/drivers/net/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
similarity index 100%
rename from drivers/net/au1000_eth.c
rename to drivers/net/ethernet/amd/au1000_eth.c
diff --git a/drivers/net/au1000_eth.h b/drivers/net/ethernet/amd/au1000_eth.h
similarity index 100%
rename from drivers/net/au1000_eth.h
rename to drivers/net/ethernet/amd/au1000_eth.h
diff --git a/drivers/net/declance.c b/drivers/net/ethernet/amd/declance.c
similarity index 100%
rename from drivers/net/declance.c
rename to drivers/net/ethernet/amd/declance.c
diff --git a/drivers/net/depca.c b/drivers/net/ethernet/amd/depca.c
similarity index 100%
rename from drivers/net/depca.c
rename to drivers/net/ethernet/amd/depca.c
diff --git a/drivers/net/depca.h b/drivers/net/ethernet/amd/depca.h
similarity index 100%
rename from drivers/net/depca.h
rename to drivers/net/ethernet/amd/depca.h
diff --git a/drivers/net/hplance.c b/drivers/net/ethernet/amd/hplance.c
similarity index 100%
rename from drivers/net/hplance.c
rename to drivers/net/ethernet/amd/hplance.c
diff --git a/drivers/net/hplance.h b/drivers/net/ethernet/amd/hplance.h
similarity index 100%
rename from drivers/net/hplance.h
rename to drivers/net/ethernet/amd/hplance.h
diff --git a/drivers/net/lance.c b/drivers/net/ethernet/amd/lance.c
similarity index 100%
rename from drivers/net/lance.c
rename to drivers/net/ethernet/amd/lance.c
diff --git a/drivers/net/mvme147.c b/drivers/net/ethernet/amd/mvme147.c
similarity index 100%
rename from drivers/net/mvme147.c
rename to drivers/net/ethernet/amd/mvme147.c
diff --git a/drivers/net/ni65.c b/drivers/net/ethernet/amd/ni65.c
similarity index 100%
rename from drivers/net/ni65.c
rename to drivers/net/ethernet/amd/ni65.c
diff --git a/drivers/net/ni65.h b/drivers/net/ethernet/amd/ni65.h
similarity index 100%
rename from drivers/net/ni65.h
rename to drivers/net/ethernet/amd/ni65.h
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
similarity index 100%
rename from drivers/net/pcmcia/nmclan_cs.c
rename to drivers/net/ethernet/amd/nmclan_cs.c
diff --git a/drivers/net/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
similarity index 100%
rename from drivers/net/pcnet32.c
rename to drivers/net/ethernet/amd/pcnet32.c
diff --git a/drivers/net/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
similarity index 100%
rename from drivers/net/sun3lance.c
rename to drivers/net/ethernet/amd/sun3lance.c
diff --git a/drivers/net/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
similarity index 100%
rename from drivers/net/sunlance.c
rename to drivers/net/ethernet/amd/sunlance.c
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index b67c5ed..e17ad95 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -41,15 +41,6 @@  config PCMCIA_PCNET
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcnet_cs.  If unsure, say N.
 
-config PCMCIA_NMCLAN
-	tristate "New Media PCMCIA support"
-	help
-	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
-	  PCMCIA (PC-card) Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called nmclan_cs.  If unsure, say N.
-
 config PCMCIA_SMC91C92
 	tristate "SMC 91Cxx PCMCIA support"
 	select CRC32
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index 2f2ab3b..985f0ae 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -4,7 +4,6 @@ 
 
 # 16-bit client drivers
 obj-$(CONFIG_PCMCIA_FMVJ18X)	+= fmvj18x_cs.o
-obj-$(CONFIG_PCMCIA_NMCLAN)	+= nmclan_cs.o
 obj-$(CONFIG_PCMCIA_PCNET)	+= pcnet_cs.o
 obj-$(CONFIG_PCMCIA_SMC91C92)	+= smc91c92_cs.o
 obj-$(CONFIG_PCMCIA_XIRC2PS)	+= xirc2ps_cs.o