diff mbox series

vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x

Message ID 20190402220612.1055433-1-cleech@redhat.com
State Accepted
Delegated to: David Miller
Headers show
Series vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x | expand

Commit Message

Chris Leech April 2, 2019, 10:06 p.m. UTC
Way back in 3c9c36bcedd426f2be2826da43e5163de61735f7 the
ndo_fcoe_get_wwn pointer was switched from depending on CONFIG_FCOE to
CONFIG_LIBFCOE in order to allow building FCoE support into the bnx2x
driver and used by bnx2fc without including the generic software fcoe
module.

But, FCoE is generally used over an 802.1q VLAN, and the implementation
of ndo_fcoe_get_wwn in the 8021q module was not similarly changed.  The
result is that if CONFIG_FCOE is disabled, then bnz2fc cannot make a
call to ndo_fcoe_get_wwn through the 8021q interface to the underlying
bnx2x interface.  The bnx2fc driver then falls back to a potentially
different mapping of Ethernet MAC to Fibre Channel WWN, creating an
incompatibility with the fabric and target configurations when compared
to the WWNs used by pre-boot firmware and differently-configured
kernels.

So make the conditional inclusion of FCoE code in 8021q match the
conditional inclusion in netdevice.h

Signed-off-by: Chris Leech <cleech@redhat.com>
---
 net/8021q/vlan_dev.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

Comments

David Miller April 5, 2019, 12:18 a.m. UTC | #1
From: Chris Leech <cleech@redhat.com>
Date: Tue,  2 Apr 2019 15:06:12 -0700

> Way back in 3c9c36bcedd426f2be2826da43e5163de61735f7 the
> ndo_fcoe_get_wwn pointer was switched from depending on CONFIG_FCOE to
> CONFIG_LIBFCOE in order to allow building FCoE support into the bnx2x
> driver and used by bnx2fc without including the generic software fcoe
> module.
> 
> But, FCoE is generally used over an 802.1q VLAN, and the implementation
> of ndo_fcoe_get_wwn in the 8021q module was not similarly changed.  The
> result is that if CONFIG_FCOE is disabled, then bnz2fc cannot make a
> call to ndo_fcoe_get_wwn through the 8021q interface to the underlying
> bnx2x interface.  The bnx2fc driver then falls back to a potentially
> different mapping of Ethernet MAC to Fibre Channel WWN, creating an
> incompatibility with the fabric and target configurations when compared
> to the WWNs used by pre-boot firmware and differently-configured
> kernels.
> 
> So make the conditional inclusion of FCoE code in 8021q match the
> conditional inclusion in netdevice.h
> 
> Signed-off-by: Chris Leech <cleech@redhat.com>

Applied, thanks Chris.
diff mbox series

Patch

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 15293c2a5dd8..8d77b6ee4477 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -443,17 +443,6 @@  static int vlan_dev_fcoe_disable(struct net_device *dev)
 	return rc;
 }
 
-static int vlan_dev_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type)
-{
-	struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
-	const struct net_device_ops *ops = real_dev->netdev_ops;
-	int rc = -EINVAL;
-
-	if (ops->ndo_fcoe_get_wwn)
-		rc = ops->ndo_fcoe_get_wwn(real_dev, wwn, type);
-	return rc;
-}
-
 static int vlan_dev_fcoe_ddp_target(struct net_device *dev, u16 xid,
 				    struct scatterlist *sgl, unsigned int sgc)
 {
@@ -468,6 +457,19 @@  static int vlan_dev_fcoe_ddp_target(struct net_device *dev, u16 xid,
 }
 #endif
 
+#ifdef NETDEV_FCOE_WWNN
+static int vlan_dev_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type)
+{
+	struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
+	const struct net_device_ops *ops = real_dev->netdev_ops;
+	int rc = -EINVAL;
+
+	if (ops->ndo_fcoe_get_wwn)
+		rc = ops->ndo_fcoe_get_wwn(real_dev, wwn, type);
+	return rc;
+}
+#endif
+
 static void vlan_dev_change_rx_flags(struct net_device *dev, int change)
 {
 	struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
@@ -794,9 +796,11 @@  static const struct net_device_ops vlan_netdev_ops = {
 	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
 	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
 	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
-	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
 	.ndo_fcoe_ddp_target	= vlan_dev_fcoe_ddp_target,
 #endif
+#ifdef NETDEV_FCOE_WWNN
+	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
+#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= vlan_dev_poll_controller,
 	.ndo_netpoll_setup	= vlan_dev_netpoll_setup,