Patchwork [v2] net/smsc911x: add device tree probe support

login
register
mail settings
Submitter Shawn Guo
Date July 29, 2011, 8:43 a.m.
Message ID <1311928996-10729-1-git-send-email-shawn.guo@linaro.org>
Download mbox | patch
Permalink /patch/107357/
State Superseded
Delegated to: David Miller
Headers show

Comments

Shawn Guo - July 29, 2011, 8:43 a.m.
It adds device tree probe support for smsc911x driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: David S. Miller <davem@davemloft.net>
---
Changes since v1:
 * Instead of getting irq line from gpio number, it use irq domain
   to keep platform_get_resource(IORESOURCE_IRQ) works for dt too.
 * Use 'lan9115' the first model that smsc911x supports in the match
   table
 * Use reg-shift and reg-io-width which already used in of_serial for
   shift and access size binding

 Documentation/devicetree/bindings/net/smsc911x.txt |   38 +++++++++
 drivers/net/smsc911x.c                             |   85 +++++++++++++++++---
 2 files changed, 112 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt
Grant Likely - July 29, 2011, 3:53 p.m.
On Fri, Jul 29, 2011 at 04:43:16PM +0800, Shawn Guo wrote:
> It adds device tree probe support for smsc911x driver.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Steve Glendinning <steve.glendinning@smsc.com>
> Cc: David S. Miller <davem@davemloft.net>

Some comments below, and I asked a question on the older version about
the actual model name vs. compatible, but otherwise it looks right and
you can add my:

Reviewed-by: Grant Likely <grant.likely@secretlab.ca>

> ---
> Changes since v1:
>  * Instead of getting irq line from gpio number, it use irq domain
>    to keep platform_get_resource(IORESOURCE_IRQ) works for dt too.
>  * Use 'lan9115' the first model that smsc911x supports in the match
>    table
>  * Use reg-shift and reg-io-width which already used in of_serial for
>    shift and access size binding
> 
>  Documentation/devicetree/bindings/net/smsc911x.txt |   38 +++++++++
>  drivers/net/smsc911x.c                             |   85 +++++++++++++++++---
>  2 files changed, 112 insertions(+), 11 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
> new file mode 100644
> index 0000000..271c454
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/smsc911x.txt
> @@ -0,0 +1,38 @@
> +* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
> +
> +Required properties:
> +- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
> +- reg : Address and length of the io space for SMSC LAN
> +- interrupts : Should contain SMSC LAN interrupt line
> +- interrupt-parent : Should be the phandle for the interrupt controller
> +  that services interrupts for this device
> +- phy-mode : String, operation mode of the PHY interface.
> +  Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
> +  "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
> +
> +Optional properties:
> +- reg-shift : Specify the quantity to shift the register offsets by
> +- reg-io-width : Specify the size (in bytes) of the IO accesses that
> +  should be performed on the device.  Valid value for SMSC LAN is
> +  2 or 4.  If it's omitted or invalid, the size would be 2.
> +- smsc,irq-active-high : Indicates the IRQ polarity is active-low

Which is it?  Active high or active low?  The property doesn't match
the description.

> +- smsc,irq-push-pull : Indicates the IRQ type is push-pull

What exactly does "push-pull" mean here?

> +- smsc,force-internal-phy : Forces SMSC LAN controller to use
> +  internal PHY
> +- smsc,force-external-phy : Forces SMSC LAN controller to use
> +  external PHY
> +- smsc,save-mac-address : Indicates that mac address needs to be saved
> +  before resetting the controller
> +- local-mac-address : 6 bytes, mac address
> +
> +Examples:
> +
> +lan9220@f4000000 {
> +	compatible = "smsc,lan9220", "smsc,lan9115";
> +	reg = <0xf4000000 0x2000000>;
> +	phy-mode = "mii";
> +	interrupt-parent = <&gpio1>;
> +	interrupts = <31>;
> +	reg-io-width = <4>;
> +	smsc,irq-push-pull;
> +};
> diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
> index b9016a3..75c08a5 100644
> --- a/drivers/net/smsc911x.c
> +++ b/drivers/net/smsc911x.c
> @@ -53,6 +53,10 @@
>  #include <linux/phy.h>
>  #include <linux/smsc911x.h>
>  #include <linux/device.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_net.h>
>  #include "smsc911x.h"
>  
>  #define SMSC_CHIPNAME		"smsc911x"
> @@ -2095,8 +2099,58 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
>  	.tx_writefifo = smsc911x_tx_writefifo_shift,
>  };
>  
> +#ifdef CONFIG_OF
> +static int __devinit smsc911x_probe_config_dt(
> +				struct smsc911x_platform_config *config,
> +				struct device_node *np)
> +{
> +	const char *mac;
> +	u32 width = 0;
> +
> +	if (!np)
> +		return -ENODEV;
> +
> +	config->phy_interface = of_get_phy_mode(np);
> +
> +	mac = of_get_mac_address(np);
> +	if (mac)
> +		memcpy(config->mac, mac, ETH_ALEN);
> +
> +	of_property_read_u32(np, "reg-shift", &config->shift);
> +
> +	of_property_read_u32(np, "reg-io-width", &width);
> +	if (width == 4)
> +		config->flags |= SMSC911X_USE_32BIT;
> +
> +	if (of_get_property(np, "smsc,irq-active-high", NULL))
> +		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
> +
> +	if (of_get_property(np, "smsc,irq-push-pull", NULL))
> +		config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
> +
> +	if (of_get_property(np, "smsc,force-internal-phy", NULL))
> +		config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
> +
> +	if (of_get_property(np, "smsc,force-external-phy", NULL))
> +		config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
> +
> +	if (of_get_property(np, "smsc,save-mac-address", NULL))
> +		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
> +
> +	return 0;
> +}
> +#else
> +static inline int smsc911x_probe_config_dt(
> +				struct smsc911x_platform_config *config,
> +				struct device_node *np)
> +{
> +	return -ENODEV;
> +}
> +#endif /* CONFIG_OF */
> +
>  static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
>  {
> +	struct device_node *np = pdev->dev.of_node;
>  	struct net_device *dev;
>  	struct smsc911x_data *pdata;
>  	struct smsc911x_platform_config *config = pdev->dev.platform_data;
> @@ -2107,13 +2161,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
>  
>  	pr_info("Driver version %s\n", SMSC_DRV_VERSION);
>  
> -	/* platform data specifies irq & dynamic bus configuration */
> -	if (!pdev->dev.platform_data) {
> -		pr_warn("platform_data not provided\n");
> -		retval = -ENODEV;
> -		goto out_0;
> -	}
> -
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>  					   "smsc911x-memory");
>  	if (!res)
> @@ -2152,9 +2199,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
>  	irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
>  	pdata->ioaddr = ioremap_nocache(res->start, res_size);
>  
> -	/* copy config parameters across to pdata */
> -	memcpy(&pdata->config, config, sizeof(pdata->config));
> -
>  	pdata->dev = dev;
>  	pdata->msg_enable = ((1 << debug) - 1);
>  
> @@ -2164,10 +2208,22 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
>  		goto out_free_netdev_2;
>  	}
>  
> +	retval = smsc911x_probe_config_dt(&pdata->config, np);
> +	if (retval && config) {
> +		/* copy config parameters across to pdata */
> +		memcpy(&pdata->config, config, sizeof(pdata->config));

The following will do the same but is type-safe:
	pdata->config = *config;

> +		retval = 0;
> +	}
> +
> +	if (retval) {
> +		SMSC_WARN(pdata, probe, "Error smsc911x config not found");
> +		goto out_unmap_io_3;
> +	}
> +
>  	/* assume standard, non-shifted, access to HW registers */
>  	pdata->ops = &standard_smsc911x_ops;
>  	/* apply the right access if shifting is needed */
> -	if (config->shift)
> +	if (pdata->config.shift)
>  		pdata->ops = &shifted_smsc911x_ops;
>  
>  	retval = smsc911x_init(dev);
> @@ -2314,6 +2370,12 @@ static const struct dev_pm_ops smsc911x_pm_ops = {
>  #define SMSC911X_PM_OPS NULL
>  #endif
>  
> +static const struct of_device_id smsc911x_dt_ids[] = {
> +	{ .compatible = "smsc,lan9115", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
> +
>  static struct platform_driver smsc911x_driver = {
>  	.probe = smsc911x_drv_probe,
>  	.remove = __devexit_p(smsc911x_drv_remove),
> @@ -2321,6 +2383,7 @@ static struct platform_driver smsc911x_driver = {
>  		.name	= SMSC_CHIPNAME,
>  		.owner	= THIS_MODULE,
>  		.pm	= SMSC911X_PM_OPS,
> +		.of_match_table = smsc911x_dt_ids,
>  	},
>  };
>  
> -- 
> 1.7.4.1
> 
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Shawn Guo - July 29, 2011, 4:16 p.m.
On Fri, Jul 29, 2011 at 09:53:54AM -0600, Grant Likely wrote:
> On Fri, Jul 29, 2011 at 04:43:16PM +0800, Shawn Guo wrote:
> > It adds device tree probe support for smsc911x driver.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Grant Likely <grant.likely@secretlab.ca>
> > Cc: Steve Glendinning <steve.glendinning@smsc.com>
> > Cc: David S. Miller <davem@davemloft.net>
> 
> Some comments below, and I asked a question on the older version about
> the actual model name vs. compatible, but otherwise it looks right and
> you can add my:
> 
> Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
> 
Thanks, Grant.

> > ---
> > Changes since v1:
> >  * Instead of getting irq line from gpio number, it use irq domain
> >    to keep platform_get_resource(IORESOURCE_IRQ) works for dt too.
> >  * Use 'lan9115' the first model that smsc911x supports in the match
> >    table
> >  * Use reg-shift and reg-io-width which already used in of_serial for
> >    shift and access size binding
> > 
> >  Documentation/devicetree/bindings/net/smsc911x.txt |   38 +++++++++
> >  drivers/net/smsc911x.c                             |   85 +++++++++++++++++---
> >  2 files changed, 112 insertions(+), 11 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
> > new file mode 100644
> > index 0000000..271c454
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/smsc911x.txt
> > @@ -0,0 +1,38 @@
> > +* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
> > +
> > +Required properties:
> > +- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
> > +- reg : Address and length of the io space for SMSC LAN
> > +- interrupts : Should contain SMSC LAN interrupt line
> > +- interrupt-parent : Should be the phandle for the interrupt controller
> > +  that services interrupts for this device
> > +- phy-mode : String, operation mode of the PHY interface.
> > +  Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
> > +  "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
> > +
> > +Optional properties:
> > +- reg-shift : Specify the quantity to shift the register offsets by
> > +- reg-io-width : Specify the size (in bytes) of the IO accesses that
> > +  should be performed on the device.  Valid value for SMSC LAN is
> > +  2 or 4.  If it's omitted or invalid, the size would be 2.
> > +- smsc,irq-active-high : Indicates the IRQ polarity is active-low
> 
> Which is it?  Active high or active low?  The property doesn't match
> the description.
> 
Sorry.  The description is wrong.

> > +- smsc,irq-push-pull : Indicates the IRQ type is push-pull
> 
> What exactly does "push-pull" mean here?
> 
I do not understand exactly.  But I see the term used in driver was
originally from SMSC data sheet.

> > +- smsc,force-internal-phy : Forces SMSC LAN controller to use
> > +  internal PHY
> > +- smsc,force-external-phy : Forces SMSC LAN controller to use
> > +  external PHY
> > +- smsc,save-mac-address : Indicates that mac address needs to be saved
> > +  before resetting the controller
> > +- local-mac-address : 6 bytes, mac address
> > +
> > +Examples:
> > +
> > +lan9220@f4000000 {
> > +	compatible = "smsc,lan9220", "smsc,lan9115";
> > +	reg = <0xf4000000 0x2000000>;
> > +	phy-mode = "mii";
> > +	interrupt-parent = <&gpio1>;
> > +	interrupts = <31>;
> > +	reg-io-width = <4>;
> > +	smsc,irq-push-pull;
> > +};
> > diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
> > index b9016a3..75c08a5 100644
> > --- a/drivers/net/smsc911x.c
> > +++ b/drivers/net/smsc911x.c
> > @@ -53,6 +53,10 @@
> >  #include <linux/phy.h>
> >  #include <linux/smsc911x.h>
> >  #include <linux/device.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/of_net.h>
> >  #include "smsc911x.h"
> >  
> >  #define SMSC_CHIPNAME		"smsc911x"
> > @@ -2095,8 +2099,58 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
> >  	.tx_writefifo = smsc911x_tx_writefifo_shift,
> >  };
> >  
> > +#ifdef CONFIG_OF
> > +static int __devinit smsc911x_probe_config_dt(
> > +				struct smsc911x_platform_config *config,
> > +				struct device_node *np)
> > +{
> > +	const char *mac;
> > +	u32 width = 0;
> > +
> > +	if (!np)
> > +		return -ENODEV;
> > +
> > +	config->phy_interface = of_get_phy_mode(np);
> > +
> > +	mac = of_get_mac_address(np);
> > +	if (mac)
> > +		memcpy(config->mac, mac, ETH_ALEN);
> > +
> > +	of_property_read_u32(np, "reg-shift", &config->shift);
> > +
> > +	of_property_read_u32(np, "reg-io-width", &width);
> > +	if (width == 4)
> > +		config->flags |= SMSC911X_USE_32BIT;
> > +
> > +	if (of_get_property(np, "smsc,irq-active-high", NULL))
> > +		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
> > +
> > +	if (of_get_property(np, "smsc,irq-push-pull", NULL))
> > +		config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
> > +
> > +	if (of_get_property(np, "smsc,force-internal-phy", NULL))
> > +		config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
> > +
> > +	if (of_get_property(np, "smsc,force-external-phy", NULL))
> > +		config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
> > +
> > +	if (of_get_property(np, "smsc,save-mac-address", NULL))
> > +		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
> > +
> > +	return 0;
> > +}
> > +#else
> > +static inline int smsc911x_probe_config_dt(
> > +				struct smsc911x_platform_config *config,
> > +				struct device_node *np)
> > +{
> > +	return -ENODEV;
> > +}
> > +#endif /* CONFIG_OF */
> > +
> >  static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
> >  {
> > +	struct device_node *np = pdev->dev.of_node;
> >  	struct net_device *dev;
> >  	struct smsc911x_data *pdata;
> >  	struct smsc911x_platform_config *config = pdev->dev.platform_data;
> > @@ -2107,13 +2161,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
> >  
> >  	pr_info("Driver version %s\n", SMSC_DRV_VERSION);
> >  
> > -	/* platform data specifies irq & dynamic bus configuration */
> > -	if (!pdev->dev.platform_data) {
> > -		pr_warn("platform_data not provided\n");
> > -		retval = -ENODEV;
> > -		goto out_0;
> > -	}
> > -
> >  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> >  					   "smsc911x-memory");
> >  	if (!res)
> > @@ -2152,9 +2199,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
> >  	irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
> >  	pdata->ioaddr = ioremap_nocache(res->start, res_size);
> >  
> > -	/* copy config parameters across to pdata */
> > -	memcpy(&pdata->config, config, sizeof(pdata->config));
> > -
> >  	pdata->dev = dev;
> >  	pdata->msg_enable = ((1 << debug) - 1);
> >  
> > @@ -2164,10 +2208,22 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
> >  		goto out_free_netdev_2;
> >  	}
> >  
> > +	retval = smsc911x_probe_config_dt(&pdata->config, np);
> > +	if (retval && config) {
> > +		/* copy config parameters across to pdata */
> > +		memcpy(&pdata->config, config, sizeof(pdata->config));
> 
> The following will do the same but is type-safe:
> 	pdata->config = *config;
> 
I choose to keep the original taste :)

> > +		retval = 0;
> > +	}
> > +
> > +	if (retval) {
> > +		SMSC_WARN(pdata, probe, "Error smsc911x config not found");
> > +		goto out_unmap_io_3;
> > +	}
> > +
> >  	/* assume standard, non-shifted, access to HW registers */
> >  	pdata->ops = &standard_smsc911x_ops;
> >  	/* apply the right access if shifting is needed */
> > -	if (config->shift)
> > +	if (pdata->config.shift)
> >  		pdata->ops = &shifted_smsc911x_ops;
> >  
> >  	retval = smsc911x_init(dev);
> > @@ -2314,6 +2370,12 @@ static const struct dev_pm_ops smsc911x_pm_ops = {
> >  #define SMSC911X_PM_OPS NULL
> >  #endif
> >  
> > +static const struct of_device_id smsc911x_dt_ids[] = {
> > +	{ .compatible = "smsc,lan9115", },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
> > +
> >  static struct platform_driver smsc911x_driver = {
> >  	.probe = smsc911x_drv_probe,
> >  	.remove = __devexit_p(smsc911x_drv_remove),
> > @@ -2321,6 +2383,7 @@ static struct platform_driver smsc911x_driver = {
> >  		.name	= SMSC_CHIPNAME,
> >  		.owner	= THIS_MODULE,
> >  		.pm	= SMSC911X_PM_OPS,
> > +		.of_match_table = smsc911x_dt_ids,
> >  	},
> >  };
> >  
> > -- 
> > 1.7.4.1
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Patch

diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
new file mode 100644
index 0000000..271c454
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc911x.txt
@@ -0,0 +1,38 @@ 
+* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+Required properties:
+- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
+- reg : Address and length of the io space for SMSC LAN
+- interrupts : Should contain SMSC LAN interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- phy-mode : String, operation mode of the PHY interface.
+  Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+  "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+
+Optional properties:
+- reg-shift : Specify the quantity to shift the register offsets by
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+  should be performed on the device.  Valid value for SMSC LAN is
+  2 or 4.  If it's omitted or invalid, the size would be 2.
+- smsc,irq-active-high : Indicates the IRQ polarity is active-low
+- smsc,irq-push-pull : Indicates the IRQ type is push-pull
+- smsc,force-internal-phy : Forces SMSC LAN controller to use
+  internal PHY
+- smsc,force-external-phy : Forces SMSC LAN controller to use
+  external PHY
+- smsc,save-mac-address : Indicates that mac address needs to be saved
+  before resetting the controller
+- local-mac-address : 6 bytes, mac address
+
+Examples:
+
+lan9220@f4000000 {
+	compatible = "smsc,lan9220", "smsc,lan9115";
+	reg = <0xf4000000 0x2000000>;
+	phy-mode = "mii";
+	interrupt-parent = <&gpio1>;
+	interrupts = <31>;
+	reg-io-width = <4>;
+	smsc,irq-push-pull;
+};
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b9016a3..75c08a5 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -53,6 +53,10 @@ 
 #include <linux/phy.h>
 #include <linux/smsc911x.h>
 #include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_net.h>
 #include "smsc911x.h"
 
 #define SMSC_CHIPNAME		"smsc911x"
@@ -2095,8 +2099,58 @@  static const struct smsc911x_ops shifted_smsc911x_ops = {
 	.tx_writefifo = smsc911x_tx_writefifo_shift,
 };
 
+#ifdef CONFIG_OF
+static int __devinit smsc911x_probe_config_dt(
+				struct smsc911x_platform_config *config,
+				struct device_node *np)
+{
+	const char *mac;
+	u32 width = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	config->phy_interface = of_get_phy_mode(np);
+
+	mac = of_get_mac_address(np);
+	if (mac)
+		memcpy(config->mac, mac, ETH_ALEN);
+
+	of_property_read_u32(np, "reg-shift", &config->shift);
+
+	of_property_read_u32(np, "reg-io-width", &width);
+	if (width == 4)
+		config->flags |= SMSC911X_USE_32BIT;
+
+	if (of_get_property(np, "smsc,irq-active-high", NULL))
+		config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
+
+	if (of_get_property(np, "smsc,irq-push-pull", NULL))
+		config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
+
+	if (of_get_property(np, "smsc,force-internal-phy", NULL))
+		config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
+
+	if (of_get_property(np, "smsc,force-external-phy", NULL))
+		config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
+
+	if (of_get_property(np, "smsc,save-mac-address", NULL))
+		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
+
+	return 0;
+}
+#else
+static inline int smsc911x_probe_config_dt(
+				struct smsc911x_platform_config *config,
+				struct device_node *np)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct net_device *dev;
 	struct smsc911x_data *pdata;
 	struct smsc911x_platform_config *config = pdev->dev.platform_data;
@@ -2107,13 +2161,6 @@  static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 
 	pr_info("Driver version %s\n", SMSC_DRV_VERSION);
 
-	/* platform data specifies irq & dynamic bus configuration */
-	if (!pdev->dev.platform_data) {
-		pr_warn("platform_data not provided\n");
-		retval = -ENODEV;
-		goto out_0;
-	}
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "smsc911x-memory");
 	if (!res)
@@ -2152,9 +2199,6 @@  static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
 	pdata->ioaddr = ioremap_nocache(res->start, res_size);
 
-	/* copy config parameters across to pdata */
-	memcpy(&pdata->config, config, sizeof(pdata->config));
-
 	pdata->dev = dev;
 	pdata->msg_enable = ((1 << debug) - 1);
 
@@ -2164,10 +2208,22 @@  static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		goto out_free_netdev_2;
 	}
 
+	retval = smsc911x_probe_config_dt(&pdata->config, np);
+	if (retval && config) {
+		/* copy config parameters across to pdata */
+		memcpy(&pdata->config, config, sizeof(pdata->config));
+		retval = 0;
+	}
+
+	if (retval) {
+		SMSC_WARN(pdata, probe, "Error smsc911x config not found");
+		goto out_unmap_io_3;
+	}
+
 	/* assume standard, non-shifted, access to HW registers */
 	pdata->ops = &standard_smsc911x_ops;
 	/* apply the right access if shifting is needed */
-	if (config->shift)
+	if (pdata->config.shift)
 		pdata->ops = &shifted_smsc911x_ops;
 
 	retval = smsc911x_init(dev);
@@ -2314,6 +2370,12 @@  static const struct dev_pm_ops smsc911x_pm_ops = {
 #define SMSC911X_PM_OPS NULL
 #endif
 
+static const struct of_device_id smsc911x_dt_ids[] = {
+	{ .compatible = "smsc,lan9115", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
+
 static struct platform_driver smsc911x_driver = {
 	.probe = smsc911x_drv_probe,
 	.remove = __devexit_p(smsc911x_drv_remove),
@@ -2321,6 +2383,7 @@  static struct platform_driver smsc911x_driver = {
 		.name	= SMSC_CHIPNAME,
 		.owner	= THIS_MODULE,
 		.pm	= SMSC911X_PM_OPS,
+		.of_match_table = smsc911x_dt_ids,
 	},
 };