| Message ID | 1553608635-29376-1-git-send-email-michael.hennerich@analog.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | power: supply: ltc3651-charger.c: Fix typo in device name | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | "total: 0 errors, 2 warnings, 53 lines checked" |
On Tue, Mar 26, 2019 at 02:57:15PM +0100, michael.hennerich@analog.com wrote: > From: Michael Hennerich <michael.hennerich@analog.com> Seems to be a bit more than 'fix a typo'. > > There never was a device called LTC3651, it always was just LT3651. > This circumstance makes it pretty difficult to identify what this > driver is meant to control. This patch is a minimal invasive attempt > to fix this issue without affecting existing systems. > > > Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> > --- > .../devicetree/bindings/power/supply/ltc3651-charger.txt | 8 +++++--- > drivers/power/supply/Kconfig | 6 +++--- > drivers/power/supply/ltc3651-charger.c | 9 +++------ > 3 files changed, 11 insertions(+), 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > index 71f2840..f012449 100644 > --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > @@ -1,7 +1,9 @@ > -ltc3651-charger > +Analog Devices LT3651 Charger Power Supply bindings: ltc3651-charger > > Required properties: > - - compatible: "lltc,ltc3651-charger" > +- compatible: Should contain one of the following: > + * "lltc,ltc3651-charger", You should note that this one is deprecated. > + * "lltc,lt3651-charger" > - lltc,acpr-gpios: Connect to ACPR output. See remark below. > > Optional properties: > @@ -20,7 +22,7 @@ attributes to detect changes. > Example: > > charger: battery-charger { > - compatible = "lltc,ltc3651-charger"; > + compatible = "lltc,lt3651-charger"; > lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; > lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; > lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
Hi, On Tue, Mar 26, 2019 at 02:57:15PM +0100, michael.hennerich@analog.com wrote: > From: Michael Hennerich <michael.hennerich@analog.com> > > There never was a device called LTC3651, it always was just LT3651. > This circumstance makes it pretty difficult to identify what this > driver is meant to control. This patch is a minimal invasive attempt > to fix this issue without affecting existing systems. > > > Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> > --- Please change subject to "power: supply: ltc3651-charger: Fix device name" Also we probably should change the filenames and Kconfig name. -- Sebastian > .../devicetree/bindings/power/supply/ltc3651-charger.txt | 8 +++++--- > drivers/power/supply/Kconfig | 6 +++--- > drivers/power/supply/ltc3651-charger.c | 9 +++------ > 3 files changed, 11 insertions(+), 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > index 71f2840..f012449 100644 > --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > @@ -1,7 +1,9 @@ > -ltc3651-charger > +Analog Devices LT3651 Charger Power Supply bindings: ltc3651-charger > > Required properties: > - - compatible: "lltc,ltc3651-charger" > +- compatible: Should contain one of the following: > + * "lltc,ltc3651-charger", > + * "lltc,lt3651-charger" > - lltc,acpr-gpios: Connect to ACPR output. See remark below. > > Optional properties: > @@ -20,7 +22,7 @@ attributes to detect changes. > Example: > > charger: battery-charger { > - compatible = "lltc,ltc3651-charger"; > + compatible = "lltc,lt3651-charger"; > lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; > lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; > lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index e901b9879..6816a86 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -476,11 +476,11 @@ config CHARGER_MANAGER > with help of suspend_again support. > > config CHARGER_LTC3651 > - tristate "LTC3651 charger" > + tristate "Analog Devices LT3651 charger" > depends on GPIOLIB > help > - Say Y to include support for the LTC3651 battery charger which reports > - its status via GPIO lines. > + Say Y to include support for the Analog Devices (Linear Technology) > + LT3651 battery charger which reports its status via GPIO lines. > > config CHARGER_MAX14577 > tristate "Maxim MAX14577/77836 battery charger driver" > diff --git a/drivers/power/supply/ltc3651-charger.c b/drivers/power/supply/ltc3651-charger.c > index eea63ff..07ed537 100644 > --- a/drivers/power/supply/ltc3651-charger.c > +++ b/drivers/power/supply/ltc3651-charger.c > @@ -1,11 +1,7 @@ > +// SPDX-License-Identifier: GPL-2.0+ > /* > + * Driver for Analog Devices (Linear Technology) LT3651 charger IC. > * Copyright (C) 2017, Topic Embedded Products > - * Driver for LTC3651 charger IC. > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of the GNU General Public License as published by the > - * Free Software Foundation; either version 2 of the License, or (at your > - * option) any later version. > */ > > #include <linux/device.h> > @@ -190,6 +186,7 @@ static int ltc3651_charger_probe(struct platform_device *pdev) > > static const struct of_device_id ltc3651_charger_match[] = { > { .compatible = "lltc,ltc3651-charger" }, > + { .compatible = "lltc,lt3651-charger" }, > { } > }; > MODULE_DEVICE_TABLE(of, ltc3651_charger_match); > -- > 2.7.4 >
> -----Original Message----- > From: Sebastian Reichel [mailto:sre@kernel.org] > Sent: Freitag, 5. April 2019 16:38 > To: Hennerich, Michael <Michael.Hennerich@analog.com> > Cc: mike.looijmans@topic.nl; robh+dt@kernel.org; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; Getz, Robin > <Robin.Getz@analog.com> > Subject: Re: [PATCH] power: supply: ltc3651-charger.c: Fix typo in device name > > Hi, > > On Tue, Mar 26, 2019 at 02:57:15PM +0100, michael.hennerich@analog.com wrote: > > From: Michael Hennerich <michael.hennerich@analog.com> > > > > There never was a device called LTC3651, it always was just LT3651. > > This circumstance makes it pretty difficult to identify what this > > driver is meant to control. This patch is a minimal invasive attempt > > to fix this issue without affecting existing systems. > > > > > > Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> > > --- > > Please change subject to "power: supply: ltc3651-charger: Fix device name" Sure > > Also we probably should change the filenames and Kconfig name. If we go that far we can also fix the function prefixes as well. I'm a bit hesitant about the Kconfig name. It'll break existing kernel configs for no good reason!? Please let me know what you prefer. Thanks for the review. -- Michael > > -- Sebastian > > > .../devicetree/bindings/power/supply/ltc3651-charger.txt | 8 +++++--- > > drivers/power/supply/Kconfig | 6 +++--- > > drivers/power/supply/ltc3651-charger.c | 9 +++------ > > 3 files changed, 11 insertions(+), 12 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > index 71f2840..f012449 100644 > > --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > @@ -1,7 +1,9 @@ > > -ltc3651-charger > > +Analog Devices LT3651 Charger Power Supply bindings: ltc3651-charger > > > > Required properties: > > - - compatible: "lltc,ltc3651-charger" > > +- compatible: Should contain one of the following: > > + * "lltc,ltc3651-charger", > > + * "lltc,lt3651-charger" > > - lltc,acpr-gpios: Connect to ACPR output. See remark below. > > > > Optional properties: > > @@ -20,7 +22,7 @@ attributes to detect changes. > > Example: > > > > charger: battery-charger { > > - compatible = "lltc,ltc3651-charger"; > > + compatible = "lltc,lt3651-charger"; > > lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; > > lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; > > lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > > index e901b9879..6816a86 100644 > > --- a/drivers/power/supply/Kconfig > > +++ b/drivers/power/supply/Kconfig > > @@ -476,11 +476,11 @@ config CHARGER_MANAGER > > with help of suspend_again support. > > > > config CHARGER_LTC3651 > > - tristate "LTC3651 charger" > > + tristate "Analog Devices LT3651 charger" > > depends on GPIOLIB > > help > > - Say Y to include support for the LTC3651 battery charger which reports > > - its status via GPIO lines. > > + Say Y to include support for the Analog Devices (Linear Technology) > > + LT3651 battery charger which reports its status via GPIO lines. > > > > config CHARGER_MAX14577 > > tristate "Maxim MAX14577/77836 battery charger driver" > > diff --git a/drivers/power/supply/ltc3651-charger.c b/drivers/power/supply/ltc3651-charger.c > > index eea63ff..07ed537 100644 > > --- a/drivers/power/supply/ltc3651-charger.c > > +++ b/drivers/power/supply/ltc3651-charger.c > > @@ -1,11 +1,7 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > /* > > + * Driver for Analog Devices (Linear Technology) LT3651 charger IC. > > * Copyright (C) 2017, Topic Embedded Products > > - * Driver for LTC3651 charger IC. > > - * > > - * This program is free software; you can redistribute it and/or modify it > > - * under the terms of the GNU General Public License as published by the > > - * Free Software Foundation; either version 2 of the License, or (at your > > - * option) any later version. > > */ > > > > #include <linux/device.h> > > @@ -190,6 +186,7 @@ static int ltc3651_charger_probe(struct platform_device *pdev) > > > > static const struct of_device_id ltc3651_charger_match[] = { > > { .compatible = "lltc,ltc3651-charger" }, > > + { .compatible = "lltc,lt3651-charger" }, > > { } > > }; > > MODULE_DEVICE_TABLE(of, ltc3651_charger_match); > > -- > > 2.7.4 > >
Hi, On Fri, Apr 05, 2019 at 02:58:24PM +0000, Hennerich, Michael wrote: > > -----Original Message----- > > From: Sebastian Reichel [mailto:sre@kernel.org] > > Sent: Freitag, 5. April 2019 16:38 > > To: Hennerich, Michael <Michael.Hennerich@analog.com> > > Cc: mike.looijmans@topic.nl; robh+dt@kernel.org; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; Getz, Robin > > <Robin.Getz@analog.com> > > Subject: Re: [PATCH] power: supply: ltc3651-charger.c: Fix typo in device name > > > > Hi, > > > > On Tue, Mar 26, 2019 at 02:57:15PM +0100, michael.hennerich@analog.com wrote: > > > From: Michael Hennerich <michael.hennerich@analog.com> > > > > > > There never was a device called LTC3651, it always was just LT3651. > > > This circumstance makes it pretty difficult to identify what this > > > driver is meant to control. This patch is a minimal invasive attempt > > > to fix this issue without affecting existing systems. > > > > > > > > > Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> > > > --- > > > > Please change subject to "power: supply: ltc3651-charger: Fix device name" > > Sure > > > Also we probably should change the filenames and Kconfig name. > > If we go that far we can also fix the function prefixes as well. sounds good to me. > I'm a bit hesitant about the Kconfig name. It'll break existing kernel configs > for no good reason!? Please let me know what you prefer. I suppose we can keep to the old Kconfig option, if this is being used already. Hopefully not many people search for their driver using raw Kconfig names :) -- Sebastian > > Thanks for the review. > > -- Michael > > > > > -- Sebastian > > > > > .../devicetree/bindings/power/supply/ltc3651-charger.txt | 8 +++++--- > > > drivers/power/supply/Kconfig | 6 +++--- > > > drivers/power/supply/ltc3651-charger.c | 9 +++------ > > > 3 files changed, 11 insertions(+), 12 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > > index 71f2840..f012449 100644 > > > --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > > +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt > > > @@ -1,7 +1,9 @@ > > > -ltc3651-charger > > > +Analog Devices LT3651 Charger Power Supply bindings: ltc3651-charger > > > > > > Required properties: > > > - - compatible: "lltc,ltc3651-charger" > > > +- compatible: Should contain one of the following: > > > + * "lltc,ltc3651-charger", > > > + * "lltc,lt3651-charger" > > > - lltc,acpr-gpios: Connect to ACPR output. See remark below. > > > > > > Optional properties: > > > @@ -20,7 +22,7 @@ attributes to detect changes. > > > Example: > > > > > > charger: battery-charger { > > > - compatible = "lltc,ltc3651-charger"; > > > + compatible = "lltc,lt3651-charger"; > > > lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; > > > lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; > > > lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; > > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > > > index e901b9879..6816a86 100644 > > > --- a/drivers/power/supply/Kconfig > > > +++ b/drivers/power/supply/Kconfig > > > @@ -476,11 +476,11 @@ config CHARGER_MANAGER > > > with help of suspend_again support. > > > > > > config CHARGER_LTC3651 > > > - tristate "LTC3651 charger" > > > + tristate "Analog Devices LT3651 charger" > > > depends on GPIOLIB > > > help > > > - Say Y to include support for the LTC3651 battery charger which reports > > > - its status via GPIO lines. > > > + Say Y to include support for the Analog Devices (Linear Technology) > > > + LT3651 battery charger which reports its status via GPIO lines. > > > > > > config CHARGER_MAX14577 > > > tristate "Maxim MAX14577/77836 battery charger driver" > > > diff --git a/drivers/power/supply/ltc3651-charger.c b/drivers/power/supply/ltc3651-charger.c > > > index eea63ff..07ed537 100644 > > > --- a/drivers/power/supply/ltc3651-charger.c > > > +++ b/drivers/power/supply/ltc3651-charger.c > > > @@ -1,11 +1,7 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > /* > > > + * Driver for Analog Devices (Linear Technology) LT3651 charger IC. > > > * Copyright (C) 2017, Topic Embedded Products > > > - * Driver for LTC3651 charger IC. > > > - * > > > - * This program is free software; you can redistribute it and/or modify it > > > - * under the terms of the GNU General Public License as published by the > > > - * Free Software Foundation; either version 2 of the License, or (at your > > > - * option) any later version. > > > */ > > > > > > #include <linux/device.h> > > > @@ -190,6 +186,7 @@ static int ltc3651_charger_probe(struct platform_device *pdev) > > > > > > static const struct of_device_id ltc3651_charger_match[] = { > > > { .compatible = "lltc,ltc3651-charger" }, > > > + { .compatible = "lltc,lt3651-charger" }, > > > { } > > > }; > > > MODULE_DEVICE_TABLE(of, ltc3651_charger_match); > > > -- > > > 2.7.4 > > >
On 05-04-19 17:11, Sebastian Reichel wrote: > Hi, > > On Fri, Apr 05, 2019 at 02:58:24PM +0000, Hennerich, Michael wrote: >>> -----Original Message----- >>> From: Sebastian Reichel [mailto:sre@kernel.org] >>> Sent: Freitag, 5. April 2019 16:38 >>> To: Hennerich, Michael <Michael.Hennerich@analog.com> >>> Cc: mike.looijmans@topic.nl; robh+dt@kernel.org; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; Getz, Robin >>> <Robin.Getz@analog.com> >>> Subject: Re: [PATCH] power: supply: ltc3651-charger.c: Fix typo in device name >>> >>> Hi, >>> >>> On Tue, Mar 26, 2019 at 02:57:15PM +0100, michael.hennerich@analog.com wrote: >>>> From: Michael Hennerich <michael.hennerich@analog.com> >>>> >>>> There never was a device called LTC3651, it always was just LT3651. >>>> This circumstance makes it pretty difficult to identify what this >>>> driver is meant to control. This patch is a minimal invasive attempt >>>> to fix this issue without affecting existing systems. >>>> >>>> >>>> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> >>>> --- >>> >>> Please change subject to "power: supply: ltc3651-charger: Fix device name" >> >> Sure >> >>> Also we probably should change the filenames and Kconfig name. >> >> If we go that far we can also fix the function prefixes as well. > > sounds good to me. > >> I'm a bit hesitant about the Kconfig name. It'll break existing kernel configs >> for no good reason!? Please let me know what you prefer. > > I suppose we can keep to the old Kconfig option, if this is being > used already. Hopefully not many people search for their driver > using raw Kconfig names :) Well, if you don't change it now, it will never get fixed. I'm actually in favor of completely fixing the name. It does mean that I'll have to update a few devicetrees and configs, but in the long run, I think it's the better choice. > > -- Sebastian > >> >> Thanks for the review. >> >> -- Michael >> >>> >>> -- Sebastian >>> >>>> .../devicetree/bindings/power/supply/ltc3651-charger.txt | 8 +++++--- >>>> drivers/power/supply/Kconfig | 6 +++--- >>>> drivers/power/supply/ltc3651-charger.c | 9 +++------ >>>> 3 files changed, 11 insertions(+), 12 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt >>> b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt >>>> index 71f2840..f012449 100644 >>>> --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt >>>> +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt >>>> @@ -1,7 +1,9 @@ >>>> -ltc3651-charger >>>> +Analog Devices LT3651 Charger Power Supply bindings: ltc3651-charger >>>> >>>> Required properties: >>>> - - compatible: "lltc,ltc3651-charger" >>>> +- compatible: Should contain one of the following: >>>> + * "lltc,ltc3651-charger", >>>> + * "lltc,lt3651-charger" >>>> - lltc,acpr-gpios: Connect to ACPR output. See remark below. >>>> >>>> Optional properties: >>>> @@ -20,7 +22,7 @@ attributes to detect changes. >>>> Example: >>>> >>>> charger: battery-charger { >>>> - compatible = "lltc,ltc3651-charger"; >>>> + compatible = "lltc,lt3651-charger"; >>>> lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; >>>> lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; >>>> lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; >>>> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig >>>> index e901b9879..6816a86 100644 >>>> --- a/drivers/power/supply/Kconfig >>>> +++ b/drivers/power/supply/Kconfig >>>> @@ -476,11 +476,11 @@ config CHARGER_MANAGER >>>> with help of suspend_again support. >>>> >>>> config CHARGER_LTC3651 >>>> - tristate "LTC3651 charger" >>>> + tristate "Analog Devices LT3651 charger" >>>> depends on GPIOLIB >>>> help >>>> - Say Y to include support for the LTC3651 battery charger which reports >>>> - its status via GPIO lines. >>>> + Say Y to include support for the Analog Devices (Linear Technology) >>>> + LT3651 battery charger which reports its status via GPIO lines. >>>> >>>> config CHARGER_MAX14577 >>>> tristate "Maxim MAX14577/77836 battery charger driver" >>>> diff --git a/drivers/power/supply/ltc3651-charger.c b/drivers/power/supply/ltc3651-charger.c >>>> index eea63ff..07ed537 100644 >>>> --- a/drivers/power/supply/ltc3651-charger.c >>>> +++ b/drivers/power/supply/ltc3651-charger.c >>>> @@ -1,11 +1,7 @@ >>>> +// SPDX-License-Identifier: GPL-2.0+ >>>> /* >>>> + * Driver for Analog Devices (Linear Technology) LT3651 charger IC. >>>> * Copyright (C) 2017, Topic Embedded Products >>>> - * Driver for LTC3651 charger IC. >>>> - * >>>> - * This program is free software; you can redistribute it and/or modify it >>>> - * under the terms of the GNU General Public License as published by the >>>> - * Free Software Foundation; either version 2 of the License, or (at your >>>> - * option) any later version. >>>> */ >>>> >>>> #include <linux/device.h> >>>> @@ -190,6 +186,7 @@ static int ltc3651_charger_probe(struct platform_device *pdev) >>>> >>>> static const struct of_device_id ltc3651_charger_match[] = { >>>> { .compatible = "lltc,ltc3651-charger" }, >>>> + { .compatible = "lltc,lt3651-charger" }, >>>> { } >>>> }; >>>> MODULE_DEVICE_TABLE(of, ltc3651_charger_match); >>>> -- >>>> 2.7.4 >>>>
diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt index 71f2840..f012449 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt @@ -1,7 +1,9 @@ -ltc3651-charger +Analog Devices LT3651 Charger Power Supply bindings: ltc3651-charger Required properties: - - compatible: "lltc,ltc3651-charger" +- compatible: Should contain one of the following: + * "lltc,ltc3651-charger", + * "lltc,lt3651-charger" - lltc,acpr-gpios: Connect to ACPR output. See remark below. Optional properties: @@ -20,7 +22,7 @@ attributes to detect changes. Example: charger: battery-charger { - compatible = "lltc,ltc3651-charger"; + compatible = "lltc,lt3651-charger"; lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index e901b9879..6816a86 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -476,11 +476,11 @@ config CHARGER_MANAGER with help of suspend_again support. config CHARGER_LTC3651 - tristate "LTC3651 charger" + tristate "Analog Devices LT3651 charger" depends on GPIOLIB help - Say Y to include support for the LTC3651 battery charger which reports - its status via GPIO lines. + Say Y to include support for the Analog Devices (Linear Technology) + LT3651 battery charger which reports its status via GPIO lines. config CHARGER_MAX14577 tristate "Maxim MAX14577/77836 battery charger driver" diff --git a/drivers/power/supply/ltc3651-charger.c b/drivers/power/supply/ltc3651-charger.c index eea63ff..07ed537 100644 --- a/drivers/power/supply/ltc3651-charger.c +++ b/drivers/power/supply/ltc3651-charger.c @@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ /* + * Driver for Analog Devices (Linear Technology) LT3651 charger IC. * Copyright (C) 2017, Topic Embedded Products - * Driver for LTC3651 charger IC. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/device.h> @@ -190,6 +186,7 @@ static int ltc3651_charger_probe(struct platform_device *pdev) static const struct of_device_id ltc3651_charger_match[] = { { .compatible = "lltc,ltc3651-charger" }, + { .compatible = "lltc,lt3651-charger" }, { } }; MODULE_DEVICE_TABLE(of, ltc3651_charger_match);