[net] net: usb: aqc111: Extend HWID table by QNAP device
diff mbox series

Message ID 20190323135934.23749-1-igor.russkikh@aquantia.com
State Accepted
Delegated to: David Miller
Headers show
Series
  • [net] net: usb: aqc111: Extend HWID table by QNAP device
Related show

Commit Message

Igor Russkikh March 23, 2019, 1:59 p.m. UTC
From: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>

New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well

Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
---
 drivers/net/usb/aqc111.c    | 15 +++++++++++++++
 drivers/net/usb/cdc_ether.c |  8 ++++++++
 2 files changed, 23 insertions(+)

Comments

David Miller March 26, 2019, 6:20 p.m. UTC | #1
From: Igor Russkikh <Igor.Russkikh@aquantia.com>
Date: Sat, 23 Mar 2019 13:59:53 +0000

> From: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
> 
> New device of QNAP based on aqc111u
> Add this ID to blacklist of cdc_ether driver as well
> 
> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>

Applied, thanks Igor.

Patch
diff mbox series

diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index 820a2fe7d027..aff995be2a31 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1301,6 +1301,20 @@  static const struct driver_info trendnet_info = {
 	.tx_fixup	= aqc111_tx_fixup,
 };
 
+static const struct driver_info qnap_info = {
+	.description	= "QNAP QNA-UC5G1T USB to 5GbE Adapter",
+	.bind		= aqc111_bind,
+	.unbind		= aqc111_unbind,
+	.status		= aqc111_status,
+	.link_reset	= aqc111_link_reset,
+	.reset		= aqc111_reset,
+	.stop		= aqc111_stop,
+	.flags		= FLAG_ETHER | FLAG_FRAMING_AX |
+			  FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET,
+	.rx_fixup	= aqc111_rx_fixup,
+	.tx_fixup	= aqc111_tx_fixup,
+};
+
 static int aqc111_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
@@ -1455,6 +1469,7 @@  static const struct usb_device_id products[] = {
 	{AQC111_USB_ETH_DEV(0x0b95, 0x2790, asix111_info)},
 	{AQC111_USB_ETH_DEV(0x0b95, 0x2791, asix112_info)},
 	{AQC111_USB_ETH_DEV(0x20f4, 0xe05a, trendnet_info)},
+	{AQC111_USB_ETH_DEV(0x1c04, 0x0015, qnap_info)},
 	{ },/* END */
 };
 MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 5512a1038721..3e9b2c319e45 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -851,6 +851,14 @@  static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
+/* QNAP QNA-UC5G1T USB to 5GbE Adapter (based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x1c04, 0x0015, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
 /* WHITELIST!!!
  *
  * CDC Ether uses two interfaces, not necessarily consecutive.