diff mbox series

[net-next,2/2] net: phy: aquantia: check for changed interface mode in read_status

Message ID 42c600e2-073b-99c5-c03d-072e2a1536e2@gmail.com
State Accepted
Delegated to: David Miller
Headers show
Series net: phy: aquantia: add interface mode handling | expand

Commit Message

Heiner Kallweit March 19, 2019, 10:05 p.m. UTC 
From: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Depending on the auto-negotiated speed the PHY may change the interface
mode. Check for new mode and set phydev->interface accordingly.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[hkallweit1@gmail.com: picked from bigger patch and reworked]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/aquantia_main.c | 46 +++++++++++++++++++++++++++++++--
 1 file changed, 44 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 74c16b85d..034b82d41 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -10,6 +10,7 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/bitfield.h>
 #include <linux/phy.h>
 
 #include "aquantia.h"
@@ -22,6 +23,13 @@ 
 #define PHY_ID_AQCS109	0x03a1b5c2
 #define PHY_ID_AQR405	0x03a1b4b0
 
+#define MDIO_PHYXS_VEND_IF_STATUS		0xe812
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI	2
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
+
 #define MDIO_AN_VEND_PROV			0xc400
 #define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
 #define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
@@ -178,6 +186,40 @@  static int aqr_read_status(struct phy_device *phydev)
 	return genphy_c45_read_status(phydev);
 }
 
+static int aqr107_read_status(struct phy_device *phydev)
+{
+	int val, ret;
+
+	ret = aqr_read_status(phydev);
+	if (ret)
+		return ret;
+
+	if (!phydev->link)
+		return 0;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
+	if (val < 0)
+		return val;
+
+	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+		phydev->interface = PHY_INTERFACE_MODE_10GKR;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		break;
+	default:
+		phydev->interface = PHY_INTERFACE_MODE_NA;
+		break;
+	}
+
+	return 0;
+}
+
 static int aqr107_config_init(struct phy_device *phydev)
 {
 	/* Check that the PHY interface type is compatible */
@@ -254,7 +296,7 @@  static struct phy_driver aqr_driver[] = {
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.ack_interrupt	= aqr_ack_interrupt,
-	.read_status	= aqr_read_status,
+	.read_status	= aqr107_read_status,
 },
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
@@ -266,7 +308,7 @@  static struct phy_driver aqr_driver[] = {
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.ack_interrupt	= aqr_ack_interrupt,
-	.read_status	= aqr_read_status,
+	.read_status	= aqr107_read_status,
 },
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),