mt76: Use the correct hweight8() function again
diff mbox series

Message ID 1552789948-31564-1-git-send-email-yamada.masahiro@socionext.com
State Awaiting Upstream
Delegated to: David Miller
Headers show
Series
  • mt76: Use the correct hweight8() function again
Related show

Commit Message

Masahiro Yamada March 17, 2019, 2:32 a.m. UTC
Commit d0ff23c1107e ("mt76: Use the correct hweight8() function")
fixed the wrong use of __sw_hweight8().

Just a week later, commit c8846e101502 ("mt76: add driver for MT7603E
and MT7628/7688") was applid, introducing __sw_hweight8() again.

Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 drivers/net/wireless/mediatek/mt76/mt7603/beacon.c | 3 +--
 drivers/net/wireless/mediatek/mt76/mt7603/init.c   | 2 +-
 drivers/net/wireless/mediatek/mt76/mt7603/mcu.c    | 2 +-
 3 files changed, 3 insertions(+), 4 deletions(-)

Comments

Felix Fietkau March 17, 2019, 1:01 p.m. UTC | #1
On 2019-03-17 03:32, Masahiro Yamada wrote:
> Commit d0ff23c1107e ("mt76: Use the correct hweight8() function")
> fixed the wrong use of __sw_hweight8().
> 
> Just a week later, commit c8846e101502 ("mt76: add driver for MT7603E
> and MT7628/7688") was applid, introducing __sw_hweight8() again.
> 
> Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I've already sent the same patch to Kalle for 5.1 about a week ago.

- Felix

Patch
diff mbox series

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c b/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
index afcd86f..4dcb465 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
@@ -135,8 +135,7 @@  void mt7603_pre_tbtt_tasklet(unsigned long arg)
 
 out:
 	mt76_queue_tx_cleanup(dev, MT_TXQ_BEACON, false);
-	if (dev->mt76.q_tx[MT_TXQ_BEACON].queued >
-	    __sw_hweight8(dev->beacon_mask))
+	if (dev->mt76.q_tx[MT_TXQ_BEACON].queued > hweight8(dev->beacon_mask))
 		dev->beacon_check++;
 }
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
index 15cc8f3..d54dda6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
@@ -112,7 +112,7 @@  static void
 mt7603_phy_init(struct mt7603_dev *dev)
 {
 	int rx_chains = dev->mt76.antenna_mask;
-	int tx_chains = __sw_hweight8(rx_chains) - 1;
+	int tx_chains = hweight8(rx_chains) - 1;
 
 	mt76_rmw(dev, MT_WF_RMAC_RMCR,
 		 (MT_WF_RMAC_RMCR_SMPS_MODE |
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
index 4b0713f..d06905e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
@@ -433,7 +433,7 @@  int mt7603_mcu_set_channel(struct mt7603_dev *dev)
 {
 	struct cfg80211_chan_def *chandef = &dev->mt76.chandef;
 	struct ieee80211_hw *hw = mt76_hw(dev);
-	int n_chains = __sw_hweight8(dev->mt76.antenna_mask);
+	int n_chains = hweight8(dev->mt76.antenna_mask);
 	struct {
 		u8 control_chan;
 		u8 center_chan;