Patchwork [U-Boot] integrator: convert to new build system

login
register
mail settings
Submitter Linus Walleij
Date July 19, 2011, 2:49 p.m.
Message ID <1311086967-21406-1-git-send-email-linus.walleij@linaro.org>
Download mbox | patch
Permalink /patch/105477/
State Superseded
Headers show

Comments

Linus Walleij - July 19, 2011, 2:49 p.m.
This deletes the integrator split_by_variant.sh script and
defines a number of unique board types for the core modules
that are meaningful to support for the Integrator AP/CP, i.e.
the ones that did not just say "unsupported core module" in
split_by_variant.sh. If more core modules need to be supported
they are easy to add.

We delete all the old cruft in Makefile and MAKEALL that was
working around the old way of building boards. We create a
unique config file per board to satisfy the build system, but
they are just oneliners that include the existing
integratorap.h and integratorcp.h configs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
This patch goes on top of the previous git pull request and fix
the final request from Wolfgang to convert the Integrator boards
over to the new build system.
---
 MAKEALL                                     |   22 ---
 Makefile                                    |   27 ----
 arch/arm/cpu/arm720t/cpu.c                  |    5 -
 board/armltd/integrator/split_by_variant.sh |  220 ---------------------------
 boards.cfg                                  |    8 +
 include/configs/integratorap.h              |    3 +
 include/configs/integratorap_cm720t.h       |    1 +
 include/configs/integratorap_cm920t.h       |    1 +
 include/configs/integratorap_cm926ejs.h     |    1 +
 include/configs/integratorap_cm946es.h      |    1 +
 include/configs/integratorcp.h              |    2 +
 include/configs/integratorcp_cm1136.h       |    1 +
 include/configs/integratorcp_cm920t.h       |    1 +
 include/configs/integratorcp_cm926ejs.h     |    1 +
 include/configs/integratorcp_cm946es.h      |    1 +
 15 files changed, 21 insertions(+), 274 deletions(-)
 delete mode 100755 board/armltd/integrator/split_by_variant.sh
 create mode 100644 include/configs/integratorap_cm720t.h
 create mode 100644 include/configs/integratorap_cm920t.h
 create mode 100644 include/configs/integratorap_cm926ejs.h
 create mode 100644 include/configs/integratorap_cm946es.h
 create mode 100644 include/configs/integratorcp_cm1136.h
 create mode 100644 include/configs/integratorcp_cm920t.h
 create mode 100644 include/configs/integratorcp_cm926ejs.h
 create mode 100644 include/configs/integratorcp_cm946es.h
Wolfgang Denk - July 19, 2011, 8:04 p.m.
Dear Linus Walleij,

In message <1311086967-21406-1-git-send-email-linus.walleij@linaro.org> you wrote:
> This deletes the integrator split_by_variant.sh script and
> defines a number of unique board types for the core modules
> that are meaningful to support for the Integrator AP/CP, i.e.
> the ones that did not just say "unsupported core module" in
> split_by_variant.sh. If more core modules need to be supported
> they are easy to add.
> 
> We delete all the old cruft in Makefile and MAKEALL that was
> working around the old way of building boards. We create a
> unique config file per board to satisfy the build system, but
> they are just oneliners that include the existing
> integratorap.h and integratorcp.h configs.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> This patch goes on top of the previous git pull request and fix
> the final request from Wolfgang to convert the Integrator boards
> over to the new build system.

Thanks a lot.  I have one question, though:

>  include/configs/integratorap.h              |    3 +
>  include/configs/integratorap_cm720t.h       |    1 +
>  include/configs/integratorap_cm920t.h       |    1 +
>  include/configs/integratorap_cm926ejs.h     |    1 +
>  include/configs/integratorap_cm946es.h      |    1 +
>  include/configs/integratorcp.h              |    2 +
>  include/configs/integratorcp_cm1136.h       |    1 +
>  include/configs/integratorcp_cm920t.h       |    1 +
>  include/configs/integratorcp_cm926ejs.h     |    1 +
>  include/configs/integratorcp_cm946es.h      |    1 +

It appears that all the new board config files just include
integrator[ac]p.h, without any additional stuff.   Would it not make
sense to omit these file alltogether then, and let the entries in
boards.cfg point to the generic files integratorap.h resp.
integratorcp.h instead?

Best regards,

Wolfgang Denk
Linus Walleij - July 20, 2011, 7:56 a.m.
On Tue, Jul 19, 2011 at 10:04 PM, Wolfgang Denk <wd@denx.de> wrote:

> [Me]
>>  include/configs/integratorap.h              |    3 +
>>  include/configs/integratorap_cm720t.h       |    1 +
>>  include/configs/integratorap_cm920t.h       |    1 +
>>  include/configs/integratorap_cm926ejs.h     |    1 +
>>  include/configs/integratorap_cm946es.h      |    1 +
>>  include/configs/integratorcp.h              |    2 +
>>  include/configs/integratorcp_cm1136.h       |    1 +
>>  include/configs/integratorcp_cm920t.h       |    1 +
>>  include/configs/integratorcp_cm926ejs.h     |    1 +
>>  include/configs/integratorcp_cm946es.h      |    1 +
>
> It appears that all the new board config files just include
> integrator[ac]p.h, without any additional stuff.

Yes, that's how it works...

> Would it not make
> sense to omit these file alltogether then, and let the entries in
> boards.cfg point to the generic files integratorap.h resp.
> integratorcp.h instead?

This row in the global Makefile is the reason:

sinclude $(obj).boards.depend
$(obj).boards.depend:   boards.cfg
        awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config;
$$(MAKE)" }' $< > $@

It requires one *_config per board variant.

The boards are just two variants, but the CPU column differs for all of
them, depending on what CPU Module (CM) you plug into the board.

So I define these different boards just to get the right value of CPU into
$(obj)/include/config.mk

I haven't quite figured out how that file is generated, but to avoid any
more configure options being passed in it seemed like the only way
forward without revamping the build system.

Hacking Makefile to support several boards using the same *_config
seems pretty daunting, but if this is what you want I can try.

Any hints?

Yours,
Linus Walleij
Wolfgang Denk - July 20, 2011, 12:16 p.m.
Dear Linus Walleij,

In message <CACRpkdYR5+bMBpdF0F5NmQZZGnRS3=NUYq1R_FCezoj2Fp2D5w@mail.gmail.com> you wrote:
>
> > Would it not make
> > sense to omit these file alltogether then, and let the entries in
> > boards.cfg point to the generic files integratorap.h resp.
> > integratorcp.h instead?
> 
> This row in the global Makefile is the reason:
> 
> sinclude $(obj).boards.depend
> $(obj).boards.depend:   boards.cfg
>         awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config;
> $$(MAKE)" }' $< > $@
> 
> It requires one *_config per board variant.

Right.  But it does NOT require that each board has it's own file in
include/configs/<name>.h

> Any hints?

Well, for example, the following different boards and board
configurations all shar the same board config file
(include/configs/TQM823L.h) : TQM823L, TQM823L_LCD, TTTech and wtk

The same should be done for the integrator boards, too.

Best regards,

Wolfgang Denk
Linus Walleij - July 21, 2011, 7:53 a.m.
On Wed, Jul 20, 2011 at 2:16 PM, Wolfgang Denk <wd@denx.de> wrote:
> [Me]
>> It requires one *_config per board variant.
>
> Right.  But it does NOT require that each board has it's own file in
> include/configs/<name>.h

Aha I see, the last column in boards.cfg points to the name of an
a config file, else it uses the board name, new patch in a few minutes.

Thanks,
Linus Walleij

Patch

diff --git a/MAKEALL b/MAKEALL
index 4adaeb8..0292809 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,14 +303,11 @@  LIST_SA="$(boards_by_cpu sa1100)"
 #########################################################################
 
 LIST_ARM7="		\
-	ap7		\
-	ap720t		\
 	armadillo	\
 	B2		\
 	ep7312		\
 	evb4510		\
 	impa7		\
-	integratorap	\
 	lpc2292sodimm	\
 	modnet50	\
 	SMN42		\
@@ -322,17 +319,7 @@  LIST_ARM7="		\
 
 LIST_ARM9="			\
 	a320evb			\
-	ap920t			\
-	ap922_XA10		\
-	ap926ejs		\
-	ap946es			\
-	ap966			\
 	aspenite		\
-	cp920t			\
-	cp922_XA10		\
-	cp926ejs		\
-	cp946es			\
-	cp966			\
 	da830evm		\
 	da850evm		\
 	edb9301			\
@@ -391,18 +378,9 @@  LIST_ARM9="			\
 "
 
 #########################################################################
-## ARM10 Systems
-#########################################################################
-LIST_ARM10="		\
-	integratorcp	\
-	cp1026		\
-"
-
-#########################################################################
 ## ARM11 Systems
 #########################################################################
 LIST_ARM11="			\
-	cp1136			\
 	omap2420h4		\
 	apollon			\
 	imx31_litekit		\
diff --git a/Makefile b/Makefile
index e56fa02..7dc0cf7 100644
--- a/Makefile
+++ b/Makefile
@@ -892,32 +892,6 @@  TNY_A9260_config	:	unconfig
 	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
 
-########################################################################
-## ARM Integrator boards - see doc/README-integrator for more info.
-integratorap_config	\
-ap_config		\
-ap966_config		\
-ap922_config		\
-ap922_XA10_config	\
-ap7_config		\
-ap720t_config		\
-ap920t_config		\
-ap926ejs_config		\
-ap946es_config: unconfig
-	@board/armltd/integrator/split_by_variant.sh ap $@
-
-integratorcp_config	\
-cp_config		\
-cp920t_config		\
-cp926ejs_config		\
-cp946es_config		\
-cp1136_config		\
-cp966_config		\
-cp922_config		\
-cp922_XA10_config	\
-cp1026_config: unconfig
-	@board/armltd/integrator/split_by_variant.sh cp $@
-
 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
 
 omap1610inn_config \
@@ -1073,7 +1047,6 @@  clean:
 	       $(obj)board/matrix_vision/*/bootscript.img		  \
 	       $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}	  \
 	       $(obj)board/voiceblue/eeprom 				  \
-	       $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
 	       $(obj)u-boot.lds						  \
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
 	@rm -f $(obj)include/bmp_logo.h
diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c
index 88c71bf..ff992aa 100644
--- a/arch/arm/cpu/arm720t/cpu.c
+++ b/arch/arm/cpu/arm720t/cpu.c
@@ -82,9 +82,4 @@  static void cache_flush (void)
 
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
 }
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No specific cache setup for IntegratorAP/CM720T as yet */
-	void icache_enable (void)
-	{
-	}
 #endif
diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh
deleted file mode 100755
index 19fc832..0000000
--- a/board/armltd/integrator/split_by_variant.sh
+++ /dev/null
@@ -1,220 +0,0 @@ 
-#!/bin/sh
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integrator
-
-config_file=${obj}include/config.h
-
-if [ "$1" = "ap" ]
-then
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat > ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */
-_EOF
-
-# ---------------------------------------------------------
-#	Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
-	echo "$0:: No parameters - using arm_intcm"
-else
-	case "$2" in
-	ap7_config)
-	cpu="arm_intcm"
-	variant="unported core module CM7TDMI"
-	;;
-
-	ap966)
-	cpu="arm_intcm"
-	variant="unported core module CM966E-S"
-	;;
-
-	ap922_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T"
-	;;
-
-	integratorap_config	|	\
-	ap_config)
-	cpu="arm_intcm"
-	variant="unspecified core module"
-	;;
-
-	ap720t_config)
-	cpu="arm720t"
-	echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \
-		>> ${config_file}
-	variant="Core module CM720T"
-	;;
-
-	ap922_XA10_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T_XA10"
-	echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
-		>> ${config_file}
-	;;
-
-	ap920t_config)
-	cpu="arm920t"
-	variant="Core module CM920T"
-	echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
-		>> ${config_file}
-	;;
-
-	ap926ejs_config)
-	cpu="arm926ejs"
-	variant="Core module CM926EJ-S"
-	echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
-		>> ${config_file}
-	;;
-
-	ap946es_config)
-	cpu="arm946es"
-	variant="Core module CM946E-S"
-	echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
-		>> ${config_file}
-	;;
-
-	*)
-	echo "$0:: Unknown core module"
-	variant="unknown core module"
-	cpu="arm_intcm"
-	;;
-
-	esac
-fi
-
-case "$cpu" in
-	arm_intcm)
-	cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT  /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
-	;;
-
-	arm720t)
-	cat >> ${config_file} << _EOF
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
-	;;
-esac
-
-else
-
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat >> ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP   */
-_EOF
-
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
-	echo "$0:: No parameters - using arm_intcm"
-else
-	case "$2" in
-	ap966)
-	cpu="arm_intcm"
-	variant="unported core module CM966E-S"
-	;;
-
-	ap922_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T"
-	;;
-
-	integratorcp_config	|	\
-	cp_config)
-	cpu="arm_intcm"
-	variant="unspecified core module"
-	;;
-
-	cp922_XA10_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T_XA10"
-	echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
-		>> ${config_file}
-	;;
-
-	cp920t_config)
-	cpu="arm920t"
-	variant="Core module CM920T"
-	echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
-		>> ${config_file}
-	;;
-
-	cp926ejs_config)
-	cpu="arm926ejs"
-	variant="Core module CM926EJ-S"
-	echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
-		>> ${config_file}
-	;;
-
-
-	cp946es_config)
-	cpu="arm946es"
-	variant="Core module CM946E-S"
-	echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
-		>> ${config_file}
-	;;
-
-	cp1136_config)
-	cpu="arm1136"
-	variant="Core module CM1136EJF-S"
-	echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \
-		>> ${config_file}
-	;;
-
-	*)
-	echo "$0:: Unknown core module"
-	variant="unknown core module"
-	cpu="arm_intcm"
-	;;
-
-	esac
-
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
-	cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-_EOF
-fi
-
-fi # ap
-
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd
-echo "Variant: $variant with core $cpu"
diff --git a/boards.cfg b/boards.cfg
index 4522ea7..81a69ad 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -35,6 +35,7 @@ 
 # Target                     ARCH        CPU         Board name          Vendor	        SoC         Options
 ###########################################################################################################
 
+integratorcp_cm1136          arm         arm1136     integrator          armltd
 qong                         arm         arm1136     -                   davedenx       mx31
 mx31ads                      arm         arm1136     -                   freescale      mx31
 imx31_litekit                arm         arm1136     -                   logicpd        mx31
@@ -45,9 +46,12 @@  armadillo                    arm         arm720t
 ep7312                       arm         arm720t
 impa7                        arm         arm720t
 modnet50                     arm         arm720t
+integratorap_cm720t          arm         arm720t     integrator          armltd
 lpc2292sodimm                arm         arm720t     -                   -              lpc2292
 SMN42                        arm         arm720t     -                   siemens        lpc2292
 evb4510                      arm         arm720t     -                   -              s3c4510b
+integratorap_cm920t          arm         arm920t     integrator          armltd
+integratorcp_cm920t          arm         arm920t     integrator          armltd
 a320evb                      arm         arm920t     -                   faraday        a320
 at91rm9200ek                 arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek
 at91rm9200ek_ram             arm         arm920t     at91rm9200ek        atmel          at91        at91rm9200ek:RAMBOOT
@@ -71,6 +75,8 @@  smdk2410                     arm         arm920t     -                   samsung
 netstar                      arm         arm925t
 voiceblue                    arm         arm925t
 omap1510inn                  arm         arm925t     -                   ti
+integratorap_cm926ejs        arm         arm926ejs   integrator          armltd
+integratorcp_cm926ejs        arm         arm926ejs   integrator          armltd
 aspenite                     arm         arm926ejs   -                   Marvell        armada100
 afeb9260                     arm         arm926ejs   -                   -              at91
 at91cap9adk                  arm         arm926ejs   -                   atmel          at91
@@ -138,6 +144,8 @@  nhk8815_onenand              arm         arm926ejs   nhk8815             st
 omap5912osk                  arm         arm926ejs   -                   ti             omap
 edminiv2                     arm         arm926ejs   -                   LaCie          orion5x
 dkb			     arm         arm926ejs   -                   Marvell        pantheon
+integratorap_cm946es         arm         arm946es    integrator          armltd
+integratorcp_cm946es         arm         arm946es    integrator          armltd
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
 efikamx                      arm         armv7       efikamx             -              mx5		mx51evk:IMX_CONFIG=board/efikamx/imximage.cfg
 mx51evk                      arm         armv7       mx51evk             freescale      mx5		mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 7b8aea6..e89772d 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -30,6 +30,9 @@ 
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
+
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_INTEGRATOR
 /*
  * High Level Configuration Options
  * (easy to change)
diff --git a/include/configs/integratorap_cm720t.h b/include/configs/integratorap_cm720t.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorap_cm720t.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorap_cm920t.h b/include/configs/integratorap_cm920t.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorap_cm920t.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorap_cm926ejs.h b/include/configs/integratorap_cm926ejs.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorap_cm926ejs.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorap_cm946es.h b/include/configs/integratorap_cm946es.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorap_cm946es.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 2c8ca2d..210bc9d 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,6 +31,8 @@ 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_INTEGRATOR
 /*
  * High Level Configuration Options
  * (easy to change)
diff --git a/include/configs/integratorcp_cm1136.h b/include/configs/integratorcp_cm1136.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorcp_cm1136.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorcp_cm920t.h b/include/configs/integratorcp_cm920t.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorcp_cm920t.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorcp_cm926ejs.h b/include/configs/integratorcp_cm926ejs.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorcp_cm926ejs.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"
diff --git a/include/configs/integratorcp_cm946es.h b/include/configs/integratorcp_cm946es.h
new file mode 100644
index 0000000..523ebbe
--- /dev/null
+++ b/include/configs/integratorcp_cm946es.h
@@ -0,0 +1 @@ 
+#include "integratorap.h"