| Message ID | 1552302716-18554-3-git-send-email-nkristam@nvidia.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Tegra XUSB gadget driver support | expand |
On Mon, Mar 11, 2019 at 04:41:50PM +0530, Nagarjuna Kristam wrote: > On Tegra210, usb2 only otg/peripheral ports dont work in device mode. > They need an assosciated usb3 port to work in device mode. Identify > an unused usb3 port and assign it as a fake USB3 port to USB2 only > port whose mode is otg/peripheral > > Based on work by BH Hsieh <bhsieh@nvidia.com>. > > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> > --- > drivers/phy/tegra/xusb-tegra210.c | 40 +++++++++++++++++++++++++++++++++++++++ > drivers/phy/tegra/xusb.c | 29 ++++++++++++++++++++++++++++ > drivers/phy/tegra/xusb.h | 6 ++++++ > 3 files changed, 75 insertions(+) I think this looks a whole lot better than the initial version. One or two minor comments below. > diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c > index 4beebcc..48478bc4 100644 > --- a/drivers/phy/tegra/xusb-tegra210.c > +++ b/drivers/phy/tegra/xusb-tegra210.c > @@ -58,6 +58,7 @@ > #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5) > #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5)) > #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5)) > +#define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7 > > #define XUSB_PADCTL_ELPG_PROGRAM1 0x024 > #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31) > @@ -952,6 +953,15 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) > > priv = to_tegra210_xusb_padctl(padctl); > > + if (port->usb3_port_fake != -1) { > + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); > + value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( > + port->usb3_port_fake); > + value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP( > + port->usb3_port_fake, index); > + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP); > + } > + > value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); > value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK << > XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) | > @@ -1086,6 +1096,15 @@ static int tegra210_usb2_phy_power_off(struct phy *phy) > > mutex_lock(&padctl->lock); > > + if (port->usb3_port_fake != -1) { > + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); > + value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( > + port->usb3_port_fake); > + value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(port->usb3_port_fake, > + XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED); > + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP); > + } > + > if (WARN_ON(pad->enable == 0)) > goto out; > > @@ -1784,6 +1803,27 @@ static const struct tegra_xusb_pad_soc * const tegra210_pads[] = { > > static int tegra210_usb2_port_enable(struct tegra_xusb_port *port) > { > + struct tegra_xusb_usb2_port *usb2 = to_usb2_port(port); > + struct tegra_xusb_padctl *padctl = port->padctl; > + > + /* Disable usb3_port_fake usage by default and assign if needed */ > + usb2->usb3_port_fake = -1; > + if (usb2 && (usb2->mode == USB_DR_MODE_OTG || > + usb2->mode == USB_DR_MODE_PERIPHERAL)) { > + if (!tegra_xusb_usb3_port_has_companion(padctl, port->index)) { > + int fake = tegra_xusb_find_unused_usb3_port(padctl); > + > + if (fake >= 0) { > + dev_dbg(&port->dev, "Found unused usb3 port: %d\n", > + fake); > + usb2->usb3_port_fake = fake; > + } else { > + dev_err(&port->dev, "usb2-%u has neither a companion nor an unused usb3 port to fake it\n", > + port->index); > + return -ENODEV; > + } > + } > + } Generally it's preferable to check for errors and deal with success in the regular code path. So the above would be: if (fake < 0) { dev_err(...); return -ENODEV; } dev_dbg(...); ... Also, the error message is slightly redundant because &port->dev will already output the usb2-%u part. Also, perhaps try to make that message a little shorter. Something like: dev_err(&port->dev, "no unused USB3 ports available\n"); Also, I don't think this is the right place to do this. There's really no way for the ->enable() callbacks to fail. Or at least failures will be ignored, so there's no chance for the driver to do anything about the failure. It also looks somewhat tacked on. But how about if we do this as part of tegra_xusb_usb3_port_parse_dt() or tegra_xusb_add_usb3_port() already? The former is where we read the USB2 companion port index from DT so we know exactly which USB2 port to associate with a given USB3 port. So in the latter we could iterate over the USB2 ports (which have already been set up) and establish a backlink to the USB3 companion. Something like this, in tegra_xusb_add_usb3_port(): struct tegra_xusb_usb2_port *companion; for (i = 0; i < padctl->soc->ports.usb2.count; i++) { companion = tegra_xusb_find_usb2_port(padctl, i); if (!companion) continue; if (companion->base.index == usb3->port) { companion->port = index; break; } } Then, as part of tegra_xusb_setup_ports() we could add functionality to hook up a fake port if no companion is available, much like you're doing above. Perhaps we should introduce a new ->setup() callback to the port ops to encapsulate this, or perhaps add a flag to tegra_xusb_padctl_soc that is set to true on SoC generations that need the fake USB3 port. Thierry > return 0; > } > > diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c > index c6178a0..e89746d 100644 > --- a/drivers/phy/tegra/xusb.c > +++ b/drivers/phy/tegra/xusb.c > @@ -799,6 +799,35 @@ static void __tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl) > } > } > > +bool tegra_xusb_usb3_port_has_companion(struct tegra_xusb_padctl *padctl, > + unsigned int index) > +{ > + unsigned int i; > + struct tegra_xusb_usb3_port *usb3; > + > + for (i = 0; i < padctl->soc->ports.usb3.count; i++) { > + usb3 = tegra_xusb_find_usb3_port(padctl, i); > + if (usb3 && usb3->port == index) > + return true; > + } > + > + return false; > +} > + > +int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl) > +{ > + struct device_node *np; > + unsigned int i; > + > + for (i = 0; i < padctl->soc->ports.usb3.count; i++) { > + np = tegra_xusb_find_port_node(padctl, "usb3", i); > + if (!np || !of_device_is_available(np)) > + return i; > + } > + > + return -ENODEV; > +} > + > static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl) > { > struct tegra_xusb_port *port; > diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h > index 17cc8dc..b263165 100644 > --- a/drivers/phy/tegra/xusb.h > +++ b/drivers/phy/tegra/xusb.h > @@ -274,6 +274,7 @@ struct tegra_xusb_usb2_port { > struct regulator *supply; > bool internal; > enum usb_dr_mode mode; > + int usb3_port_fake; > }; > > static inline struct tegra_xusb_usb2_port * > @@ -413,6 +414,11 @@ struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl, > const char *name, > unsigned int index); > > +bool tegra_xusb_usb3_port_has_companion(struct tegra_xusb_padctl *padctl, > + unsigned int index); > + > +int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl); > + > #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC) > extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc; > #endif > -- > 2.7.4 >
On 25-04-2019 20:25, Thierry Reding wrote: > On Mon, Mar 11, 2019 at 04:41:50PM +0530, Nagarjuna Kristam wrote: >> On Tegra210, usb2 only otg/peripheral ports dont work in device mode. >> They need an assosciated usb3 port to work in device mode. Identify >> an unused usb3 port and assign it as a fake USB3 port to USB2 only >> port whose mode is otg/peripheral >> >> Based on work by BH Hsieh <bhsieh@nvidia.com>. >> >> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> >> --- >> drivers/phy/tegra/xusb-tegra210.c | 40 +++++++++++++++++++++++++++++++++++++++ >> drivers/phy/tegra/xusb.c | 29 ++++++++++++++++++++++++++++ >> drivers/phy/tegra/xusb.h | 6 ++++++ >> 3 files changed, 75 insertions(+) > > I think this looks a whole lot better than the initial version. One or > two minor comments below. > >> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c >> index 4beebcc..48478bc4 100644 >> --- a/drivers/phy/tegra/xusb-tegra210.c >> +++ b/drivers/phy/tegra/xusb-tegra210.c >> @@ -58,6 +58,7 @@ >> #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5) >> #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5)) >> #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5)) >> +#define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7 >> >> #define XUSB_PADCTL_ELPG_PROGRAM1 0x024 >> #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31) >> @@ -952,6 +953,15 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) >> >> priv = to_tegra210_xusb_padctl(padctl); >> >> + if (port->usb3_port_fake != -1) { >> + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); >> + value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( >> + port->usb3_port_fake); >> + value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP( >> + port->usb3_port_fake, index); >> + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP); >> + } >> + >> value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); >> value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK << >> XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) | >> @@ -1086,6 +1096,15 @@ static int tegra210_usb2_phy_power_off(struct phy *phy) >> >> mutex_lock(&padctl->lock); >> >> + if (port->usb3_port_fake != -1) { >> + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); >> + value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( >> + port->usb3_port_fake); >> + value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(port->usb3_port_fake, >> + XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED); >> + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP); >> + } >> + >> if (WARN_ON(pad->enable == 0)) >> goto out; >> >> @@ -1784,6 +1803,27 @@ static const struct tegra_xusb_pad_soc * const tegra210_pads[] = { >> >> static int tegra210_usb2_port_enable(struct tegra_xusb_port *port) >> { >> + struct tegra_xusb_usb2_port *usb2 = to_usb2_port(port); >> + struct tegra_xusb_padctl *padctl = port->padctl; >> + >> + /* Disable usb3_port_fake usage by default and assign if needed */ >> + usb2->usb3_port_fake = -1; >> + if (usb2 && (usb2->mode == USB_DR_MODE_OTG || >> + usb2->mode == USB_DR_MODE_PERIPHERAL)) { >> + if (!tegra_xusb_usb3_port_has_companion(padctl, port->index)) { >> + int fake = tegra_xusb_find_unused_usb3_port(padctl); >> + >> + if (fake >= 0) { >> + dev_dbg(&port->dev, "Found unused usb3 port: %d\n", >> + fake); >> + usb2->usb3_port_fake = fake; >> + } else { >> + dev_err(&port->dev, "usb2-%u has neither a companion nor an unused usb3 port to fake it\n", >> + port->index); >> + return -ENODEV; >> + } >> + } >> + } > > Generally it's preferable to check for errors and deal with success in > the regular code path. So the above would be: > > if (fake < 0) { > dev_err(...); > return -ENODEV; > } > > dev_dbg(...); > ... > > Also, the error message is slightly redundant because &port->dev will > already output the usb2-%u part. Also, perhaps try to make that message > a little shorter. Something like: > > dev_err(&port->dev, "no unused USB3 ports available\n"); > Will update accordingly > Also, I don't think this is the right place to do this. There's really > no way for the ->enable() callbacks to fail. Or at least failures will > be ignored, so there's no chance for the driver to do anything about the > failure. It also looks somewhat tacked on. > > But how about if we do this as part of tegra_xusb_usb3_port_parse_dt() > or tegra_xusb_add_usb3_port() already? The former is where we read the > USB2 companion port index from DT so we know exactly which USB2 port to > associate with a given USB3 port. So in the latter we could iterate over > the USB2 ports (which have already been set up) and establish a backlink > to the USB3 companion. > Ok, instead of doing in ->enable(), will move the logic currently inside ->enable() to a separate function called from tegra_xusb_setup_ports(). This will get executed under soc flag need_fake_usb3_support, which will be set only in t210 soc data. > Something like this, in tegra_xusb_add_usb3_port(): > > struct tegra_xusb_usb2_port *companion; > > for (i = 0; i < padctl->soc->ports.usb2.count; i++) { > companion = tegra_xusb_find_usb2_port(padctl, i); > if (!companion) > continue; > > if (companion->base.index == usb3->port) { > companion->port = index; > break; > } > } > > Then, as part of tegra_xusb_setup_ports() we could add functionality to > hook up a fake port if no companion is available, much like you're doing > above. Perhaps we should introduce a new ->setup() callback to the port > ops to encapsulate this, or perhaps add a flag to tegra_xusb_padctl_soc > that is set to true on SoC generations that need the fake USB3 port. > > Thierry I believe adding usb3 port index data to usb2 port data structure is not needed. Logic inside current ->enable() [which will be moved based on soc data feature flag] takes care of the needs. - Nagarjuna > >> return 0; >> } >> >> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c >> index c6178a0..e89746d 100644 >> --- a/drivers/phy/tegra/xusb.c >> +++ b/drivers/phy/tegra/xusb.c >> @@ -799,6 +799,35 @@ static void __tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl) >> } >> } >> >> +bool tegra_xusb_usb3_port_has_companion(struct tegra_xusb_padctl *padctl, >> + unsigned int index) >> +{ >> + unsigned int i; >> + struct tegra_xusb_usb3_port *usb3; >> + >> + for (i = 0; i < padctl->soc->ports.usb3.count; i++) { >> + usb3 = tegra_xusb_find_usb3_port(padctl, i); >> + if (usb3 && usb3->port == index) >> + return true; >> + } >> + >> + return false; >> +} >> + >> +int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl) >> +{ >> + struct device_node *np; >> + unsigned int i; >> + >> + for (i = 0; i < padctl->soc->ports.usb3.count; i++) { >> + np = tegra_xusb_find_port_node(padctl, "usb3", i); >> + if (!np || !of_device_is_available(np)) >> + return i; >> + } >> + >> + return -ENODEV; >> +} >> + >> static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl) >> { >> struct tegra_xusb_port *port; >> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h >> index 17cc8dc..b263165 100644 >> --- a/drivers/phy/tegra/xusb.h >> +++ b/drivers/phy/tegra/xusb.h >> @@ -274,6 +274,7 @@ struct tegra_xusb_usb2_port { >> struct regulator *supply; >> bool internal; >> enum usb_dr_mode mode; >> + int usb3_port_fake; >> }; >> >> static inline struct tegra_xusb_usb2_port * >> @@ -413,6 +414,11 @@ struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl, >> const char *name, >> unsigned int index); >> >> +bool tegra_xusb_usb3_port_has_companion(struct tegra_xusb_padctl *padctl, >> + unsigned int index); >> + >> +int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl); >> + >> #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC) >> extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc; >> #endif >> -- >> 2.7.4 >>
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index 4beebcc..48478bc4 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -58,6 +58,7 @@ #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5) #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5)) #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5)) +#define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7 #define XUSB_PADCTL_ELPG_PROGRAM1 0x024 #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31) @@ -952,6 +953,15 @@ static int tegra210_usb2_phy_power_on(struct phy *phy) priv = to_tegra210_xusb_padctl(padctl); + if (port->usb3_port_fake != -1) { + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); + value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( + port->usb3_port_fake); + value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP( + port->usb3_port_fake, index); + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP); + } + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK << XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) | @@ -1086,6 +1096,15 @@ static int tegra210_usb2_phy_power_off(struct phy *phy) mutex_lock(&padctl->lock); + if (port->usb3_port_fake != -1) { + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP); + value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK( + port->usb3_port_fake); + value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(port->usb3_port_fake, + XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED); + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP); + } + if (WARN_ON(pad->enable == 0)) goto out; @@ -1784,6 +1803,27 @@ static const struct tegra_xusb_pad_soc * const tegra210_pads[] = { static int tegra210_usb2_port_enable(struct tegra_xusb_port *port) { + struct tegra_xusb_usb2_port *usb2 = to_usb2_port(port); + struct tegra_xusb_padctl *padctl = port->padctl; + + /* Disable usb3_port_fake usage by default and assign if needed */ + usb2->usb3_port_fake = -1; + if (usb2 && (usb2->mode == USB_DR_MODE_OTG || + usb2->mode == USB_DR_MODE_PERIPHERAL)) { + if (!tegra_xusb_usb3_port_has_companion(padctl, port->index)) { + int fake = tegra_xusb_find_unused_usb3_port(padctl); + + if (fake >= 0) { + dev_dbg(&port->dev, "Found unused usb3 port: %d\n", + fake); + usb2->usb3_port_fake = fake; + } else { + dev_err(&port->dev, "usb2-%u has neither a companion nor an unused usb3 port to fake it\n", + port->index); + return -ENODEV; + } + } + } return 0; } diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index c6178a0..e89746d 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -799,6 +799,35 @@ static void __tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl) } } +bool tegra_xusb_usb3_port_has_companion(struct tegra_xusb_padctl *padctl, + unsigned int index) +{ + unsigned int i; + struct tegra_xusb_usb3_port *usb3; + + for (i = 0; i < padctl->soc->ports.usb3.count; i++) { + usb3 = tegra_xusb_find_usb3_port(padctl, i); + if (usb3 && usb3->port == index) + return true; + } + + return false; +} + +int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl) +{ + struct device_node *np; + unsigned int i; + + for (i = 0; i < padctl->soc->ports.usb3.count; i++) { + np = tegra_xusb_find_port_node(padctl, "usb3", i); + if (!np || !of_device_is_available(np)) + return i; + } + + return -ENODEV; +} + static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl) { struct tegra_xusb_port *port; diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h index 17cc8dc..b263165 100644 --- a/drivers/phy/tegra/xusb.h +++ b/drivers/phy/tegra/xusb.h @@ -274,6 +274,7 @@ struct tegra_xusb_usb2_port { struct regulator *supply; bool internal; enum usb_dr_mode mode; + int usb3_port_fake; }; static inline struct tegra_xusb_usb2_port * @@ -413,6 +414,11 @@ struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl, const char *name, unsigned int index); +bool tegra_xusb_usb3_port_has_companion(struct tegra_xusb_padctl *padctl, + unsigned int index); + +int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl); + #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC) extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc; #endif
On Tegra210, usb2 only otg/peripheral ports dont work in device mode. They need an assosciated usb3 port to work in device mode. Identify an unused usb3 port and assign it as a fake USB3 port to USB2 only port whose mode is otg/peripheral Based on work by BH Hsieh <bhsieh@nvidia.com>. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> --- drivers/phy/tegra/xusb-tegra210.c | 40 +++++++++++++++++++++++++++++++++++++++ drivers/phy/tegra/xusb.c | 29 ++++++++++++++++++++++++++++ drivers/phy/tegra/xusb.h | 6 ++++++ 3 files changed, 75 insertions(+)