diff mbox series

[2/2] dt-bindings: i2c-stm32: update optional properties for stm32h7/stm32mp1

Message ID 1551885100-22207-3-git-send-email-bich.hemon@st.com
State Accepted
Headers show
Series Patches for i2c-stm32 device tree bindings | expand

Commit Message

Bich HEMON March 6, 2019, 3:11 p.m. UTC
Add STM32H7 and STM32MP1 in the list of compatible socs for each
optional property.

Signed-off-by: Bich Hemon <bich.hemon@st.com>
---
 Documentation/devicetree/bindings/i2c/i2c-stm32.txt | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

Comments

Pierre Yves MORDRET March 21, 2019, 8:28 a.m. UTC | #1
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

On 3/6/19 4:11 PM, Bich HEMON wrote:
> Add STM32H7 and STM32MP1 in the list of compatible socs for each
> optional property.
> 
> Signed-off-by: Bich Hemon <bich.hemon@st.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-stm32.txt | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
> index 7d054f1..f334738 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
> @@ -19,18 +19,19 @@ Optional properties:
>    the default 100 kHz frequency will be used.
>    For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
>    100000 and 400000.
> -  For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported,
> -  possible values are 100000, 400000 and 1000000.
> -- i2c-scl-rising-time-ns: Only for STM32F7, I2C SCL Rising time for the board
> -  (default: 25)
> -- i2c-scl-falling-time-ns: Only for STM32F7, I2C SCL Falling time for the board
> -  (default: 10)
> +  For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode
> +  Plus are supported, possible values are 100000, 400000 and 1000000.
> +- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25)
> +  For STM32F7, STM32H7 and STM32MP1 only.
> +- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10)
> +  For STM32F7, STM32H7 and STM32MP1 only.
>    I2C Timings are derived from these 2 values
> -- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
> -  whether Fast Mode Plus speed is selected by slave.
> +- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
> +  Plus speed is selected by slave.
>  	1st cell: phandle to syscfg
>  	2nd cell: register offset within SYSCFG
>  	3rd cell: register bitmask for FMP bit
> +  For STM32F7, STM32H7 and STM32MP1 only.
>  
>  Example:
>  
>
Wolfram Sang March 24, 2019, 10:15 p.m. UTC | #2
On Wed, Mar 06, 2019 at 03:11:51PM +0000, Bich HEMON wrote:
> Add STM32H7 and STM32MP1 in the list of compatible socs for each
> optional property.
> 
> Signed-off-by: Bich Hemon <bich.hemon@st.com>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
index 7d054f1..f334738 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
@@ -19,18 +19,19 @@  Optional properties:
   the default 100 kHz frequency will be used.
   For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
   100000 and 400000.
-  For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported,
-  possible values are 100000, 400000 and 1000000.
-- i2c-scl-rising-time-ns: Only for STM32F7, I2C SCL Rising time for the board
-  (default: 25)
-- i2c-scl-falling-time-ns: Only for STM32F7, I2C SCL Falling time for the board
-  (default: 10)
+  For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode
+  Plus are supported, possible values are 100000, 400000 and 1000000.
+- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25)
+  For STM32F7, STM32H7 and STM32MP1 only.
+- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10)
+  For STM32F7, STM32H7 and STM32MP1 only.
   I2C Timings are derived from these 2 values
-- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
-  whether Fast Mode Plus speed is selected by slave.
+- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+  Plus speed is selected by slave.
 	1st cell: phandle to syscfg
 	2nd cell: register offset within SYSCFG
 	3rd cell: register bitmask for FMP bit
+  For STM32F7, STM32H7 and STM32MP1 only.
 
 Example: