From patchwork Sun Jul 17 22:17:09 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wolfgang Denk X-Patchwork-Id: 105109 X-Patchwork-Delegate: info@emk-elektronik.de Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id D01DFB6F77 for ; Mon, 18 Jul 2011 08:22:44 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 946C02810F; Mon, 18 Jul 2011 00:21:31 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id SJZ-1kX8Rdt7; Mon, 18 Jul 2011 00:21:31 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 7E2B228110; Mon, 18 Jul 2011 00:18:59 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 4DE3D280F6 for ; Mon, 18 Jul 2011 00:18:11 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id xSmMk7Eqae+q for ; Mon, 18 Jul 2011 00:18:09 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.10]) by theia.denx.de (Postfix) with ESMTP id 5F2D428097 for ; Mon, 18 Jul 2011 00:17:34 +0200 (CEST) Received: from frontend1.mail.m-online.net (frontend1.mail.intern.m-online.net [192.168.8.180]) by mail-out.m-online.net (Postfix) with ESMTP id CCEED188A168; Mon, 18 Jul 2011 00:17:33 +0200 (CEST) X-Auth-Info: K228Z3Lo6I1RIzb1Bc2VyFk0sRZxGJSNj8xSM1YVad0= Received: from diddl.denx.de (host-80-81-18-216.customer.m-online.net [80.81.18.216]) by smtp-auth.mnet-online.de (Postfix) with ESMTPA id 2AA6D1C0004D; Mon, 18 Jul 2011 00:17:33 +0200 (CEST) Received: from gemini.denx.de (gemini.denx.de [10.0.0.2]) by diddl.denx.de (Postfix) with ESMTP id C5994C6953A6; Mon, 18 Jul 2011 00:17:31 +0200 (CEST) Received: by gemini.denx.de (Postfix, from userid 500) id 3CA8F17E88D4; Mon, 18 Jul 2011 00:17:31 +0200 (CEST) From: Wolfgang Denk To: u-boot@lists.denx.de Date: Mon, 18 Jul 2011 00:17:09 +0200 Message-Id: <1310941040-6526-42-git-send-email-wd@denx.de> X-Mailer: git-send-email 1.7.6 In-Reply-To: <1310941040-6526-1-git-send-email-wd@denx.de> References: <1310941040-6526-1-git-send-email-wd@denx.de> Cc: Daniel Gorsulowski Subject: [U-Boot] [PATCH 41/52] ARM: remove broken "meesc" board X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.9 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de Signed-off-by: Wolfgang Denk Cc: Daniel Gorsulowski --- MAINTAINERS | 1 - board/esd/meesc/Makefile | 55 --------- board/esd/meesc/config.mk | 1 - board/esd/meesc/meesc.c | 283 ------------------------------------------- board/esd/meesc/partition.c | 37 ------ boards.cfg | 2 - doc/README.scrapyard | 1 + include/configs/meesc.h | 191 ----------------------------- 8 files changed, 1 insertions(+), 570 deletions(-) delete mode 100644 board/esd/meesc/Makefile delete mode 100644 board/esd/meesc/config.mk delete mode 100644 board/esd/meesc/meesc.c delete mode 100644 board/esd/meesc/partition.c delete mode 100644 include/configs/meesc.h diff --git a/MAINTAINERS b/MAINTAINERS index b689699..9f36643 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -627,7 +627,6 @@ Fabio Estevam Daniel Gorsulowski - meesc ARM926EJS (AT91SAM9263 SoC) otc570 ARM926EJS (AT91SAM9263 SoC) Sedji Gaouaou diff --git a/board/esd/meesc/Makefile b/board/esd/meesc/Makefile deleted file mode 100644 index b414479..0000000 --- a/board/esd/meesc/Makefile +++ /dev/null @@ -1,55 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop -# Lead Tech Design -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/esd/meesc/config.mk b/board/esd/meesc/config.mk deleted file mode 100644 index 2077692..0000000 --- a/board/esd/meesc/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c deleted file mode 100644 index 41fa3e1..0000000 --- a/board/esd/meesc/meesc.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2009-2010 - * Daniel Gorsulowski - * esd electronic system design gmbh - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -static int hw_rev = -1; /* hardware revision */ - -int get_hw_rev(void) -{ - if (hw_rev >= 0) - return hw_rev; - - hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19); - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3; - - if (hw_rev == 15) - hw_rev = 0; - - return hw_rev; -} - -#ifdef CONFIG_CMD_NAND -static void meesc_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; - - /* Enable CS3 */ - csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa[0]); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); - - /* Enable NandFlash */ - at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif /* CONFIG_CMD_NAND */ - -#ifdef CONFIG_MACB -static void meesc_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - /* Enable clock */ - writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); - at91_macb_hw_init(); -} -#endif - -/* - * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT - * controller debugging - * The ET1100 is located at physical address 0x70000000 - * Its process memory is located at physical address 0x70001000 - */ -static void meesc_ethercat_hw_init(void) -{ - at91_smc_t *smc1 = (at91_smc_t *) AT91_SMC1_BASE; - - /* Configure SMC EBI1_CS0 for EtherCAT */ - writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), - &smc1->cs[0].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) | - AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9), - &smc1->cs[0].pulse); - writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6), - &smc1->cs[0].cycle); - /* - * Configure behavior at external wait signal, byte-select mode, 16 bit - * data bus width, none data float wait states and TDF optimization - */ - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY | - AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) | - AT91_SMC_MODE_TDF, &smc1->cs[0].mode); - - /* Configure RDY/BSY */ - at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */ -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = get_ram_size((long *) PHYS_SDRAM, (1 << 27)); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x00); -#endif - return rc; -} - -int checkboard(void) -{ - char str[32]; - u_char hw_type; /* hardware type */ - - /* read the "Type" register of the ET1100 controller */ - hw_type = readb(CONFIG_ET1100_BASE); - - switch (hw_type) { - case 0x11: - case 0x3F: - /* ET1100 present, arch number of MEESC-Board */ - gd->bd->bi_arch_number = MACH_TYPE_MEESC; - puts("Board: CAN-EtherCAT Gateway"); - break; - case 0xFF: - /* no ET1100 present, arch number of EtherCAN/2-Board */ - gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2; - puts("Board: EtherCAN/2 Gateway"); - /* switch on LED1D */ - at91_set_pio_output(AT91_PIO_PORTB, 12, 1); - break; - default: - /* assume, no ET1100 present, arch number of EtherCAN/2-Board */ - gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2; - printf("ERROR! Read invalid hw_type: %02X\n", hw_type); - puts("Board: EtherCAN/2 Gateway"); - break; - } - if (getenv_f("serial#", str, sizeof(str)) > 0) { - puts(", serial# "); - puts(str); - } - printf("\nHardware-revision: 1.%d\n", get_hw_rev()); - printf("Mach-type: %lu\n", gd->bd->bi_arch_number); - return 0; -} - -#ifdef CONFIG_SERIAL_TAG -void get_board_serial(struct tag_serialnr *serialnr) -{ - char *str; - - char *serial = getenv("serial#"); - if (serial) { - str = strchr(serial, '_'); - if (str && (strlen(str) >= 4)) { - serialnr->high = (*(str + 1) << 8) | *(str + 2); - serialnr->low = simple_strtoul(str + 3, NULL, 16); - } - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} -#endif - -#ifdef CONFIG_REVISION_TAG -u32 get_board_rev(void) -{ - return hw_rev | 0x100; -} -#endif - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - char *str; - char buf[32]; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - /* - * Normally the processor clock has a divisor of 2. - * In some cases this this needs to be set to 4. - * Check the user has set environment mdiv to 4 to change the divisor. - */ - if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) { - writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) | - AT91SAM9_PMC_MDIV_4, &pmc->mckr); - at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); - serial_setbrg(); - /* Notify the user that the clock is not default */ - printf("Setting master clock to %s MHz\n", - strmhz(buf, get_mck_clk_rate())); - } - - return 0; -} -#endif /* CONFIG_MISC_INIT_R */ - -int board_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - /* Peripheral Clock Enable Register */ - writel(1 << AT91SAM9263_ID_PIOA | - 1 << AT91SAM9263_ID_PIOB | - 1 << AT91SAM9263_ID_PIOCDE | - 1 << AT91SAM9263_ID_UHP, - &pmc->pcer); - - /* initialize ET1100 Controller */ - meesc_ethercat_hw_init(); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - at91_serial_hw_init(); -#ifdef CONFIG_CMD_NAND - meesc_nand_hw_init(); -#endif -#ifdef CONFIG_HAS_DATAFLASH - at91_spi0_hw_init(1 << 0); -#endif -#ifdef CONFIG_MACB - meesc_macb_hw_init(); -#endif -#ifdef CONFIG_AT91_CAN - at91_can_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91_uhp_hw_init(); -#endif - return 0; -} diff --git a/board/esd/meesc/partition.c b/board/esd/meesc/partition.c deleted file mode 100644 index df0e1db..0000000 --- a/board/esd/meesc/partition.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ -#include -#include -#include -#include - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -}; - -/* define the area offsets */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, -}; diff --git a/boards.cfg b/boards.cfg index bc90cf7..ea50658 100644 --- a/boards.cfg +++ b/boards.cfg @@ -80,8 +80,6 @@ cpu9G20_128M arm arm926ejs cpu9260 eukrea cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000 top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000 -meesc arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_NANDFLASH -meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH pm9261 arm arm926ejs - ronetix at91 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 98fd0fa..0c2d94e 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +meesc arm arm926ejs - 2011-07-17 Daniel Gorsulowski at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop tnetv107x_evm arm arm1176 - 2011-07-17 Cyril Chemparathy integratorcp arm ? - 2011-07-17 Peter Pearse diff --git a/include/configs/meesc.h b/include/configs/meesc.h deleted file mode 100644 index a27b36b..0000000 --- a/include/configs/meesc.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2009-2010 - * Daniel Gorsulowski - * esd electronic system design gmbh - * - * Configuation settings for the esd MEESC board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Common stuff */ -#define CONFIG_MEESC 1 /* Board is esd MEESC */ -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */ -#define CONFIG_DISPLAY_BOARDINFO 1 -#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */ -#define CONFIG_PREBOOT /* enable preboot variable */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ - -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_MISC_INIT_R /* Call misc_init_r */ - -#define CONFIG_ARCH_CPU_INIT - -/* - * Hardware drivers - */ - -/* Console output */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 - -/* LED */ -#define CONFIG_AT91_LED 1 - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 - -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -/* NOR flash is not populated, disable it */ -#define CONFIG_SYS_NO_FLASH 1 - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ -#endif - -/* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_MULTI 1 -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_RESET_PHY_R - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x21e00000 - -#define CONFIG_SYS_USE_DATAFLASH 1 -#undef CONFIG_SYS_USE_NANDFLASH - -/* CAN */ -#define CONFIG_AT91_CAN 1 - -/* hw-controller addresses */ -#define CONFIG_ET1100_BASE 0x70000000 - -/* bootstrap + u-boot + env in dataflash on CS0 */ -#define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "=> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ - 128*1024, 0x1000) - -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif