diff mbox series

[1/5] ata: libahci: Ensure the host interrupt status bits are cleared

Message ID 20190222145356.23072-2-miquel.raynal@bootlin.com
State Not Applicable
Delegated to: David Miller
Headers show
Series Enable per-port SATA interrupts and drop an hack in the IRQ subsystem | expand

Commit Message

Miquel Raynal Feb. 22, 2019, 2:53 p.m. UTC 
ahci_multi_irqs_intr_hard() is going to be used as interrupt handler
to support SATA per-port interrupts. The current logic is to check and
clear the SATA port interrupt status register only. To avoid spurious
IRQs and interrupt storms, it will be needed to clear the port
interrupt bit in the host interrupt status register as well.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/ata/libahci.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index b5f57c69c487..66d4906a5013 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1912,7 +1912,10 @@  static void ahci_port_intr(struct ata_port *ap)
 static irqreturn_t ahci_multi_irqs_intr_hard(int irq, void *dev_instance)
 {
 	struct ata_port *ap = dev_instance;
+	struct ata_host *host = ap->host;
+	struct ahci_host_priv *hpriv = host->private_data;
 	void __iomem *port_mmio = ahci_port_base(ap);
+	void __iomem *mmio = hpriv->mmio;
 	u32 status;
 
 	VPRINTK("ENTER\n");
@@ -1924,6 +1927,10 @@  static irqreturn_t ahci_multi_irqs_intr_hard(int irq, void *dev_instance)
 	ahci_handle_port_interrupt(ap, port_mmio, status);
 	spin_unlock(ap->lock);
 
+	spin_lock(&host->lock);
+	writel(BIT(ap->port_no), mmio + HOST_IRQ_STAT);
+	spin_unlock(&host->lock);
+
 	VPRINTK("EXIT\n");
 
 	return IRQ_HANDLED;