new file mode 100644
@@ -0,0 +1,33 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
+======================================================================
+
+The bridge is available on platforms with the VGA enabled on the Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory. The BMC can disable this bridge. If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+ - "aspeed,ast2400-p2a-ctrl"
+ - "aspeed,ast2500-p2a-ctrl"
+
+ - reg: physical address of SCU2C followed by SCU180
+
+Optional properties:
+===================
+
+- memory-region: A phandle to a reserved_memory region to be used for the PCI
+ to AHB mapping
+
+Example:
+
+p2a: p2a-control@1e6e2000 {
+ compatible = "aspeed,ast2400-p2a-ctrl";
+ reg = <0x1e6e202C 4
+ 0x1e6e2180 4>;
+ memory-region = <&reserved_memory>;
+};
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings. Signed-off-by: Patrick Venture <venture@google.com> --- .../bindings/misc/aspeed-p2a-ctrl.txt | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt