diff mbox series

[v2,1/5] dt-bindings: phy: tegra: Add Tegra186 support

Message ID 20190221154634.10684-2-thierry.reding@gmail.com
State Accepted
Headers show
Series phy: tegra: xusb: Add Tegra186 support | expand

Commit Message

Thierry Reding Feb. 21, 2019, 3:46 p.m. UTC 
From: Thierry Reding <treding@nvidia.com>

Extend the bindings to cover the set of features found in Tegra186. Note
that, technically, there are four more supplies connected to the XUSB
pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL), but
the power sequencing requirements of Tegra186 require these to be under
the control of the PMIC.

Reviewed-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 .../bindings/phy/nvidia,tegra124-xusb-padctl.txt         | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Rob Herring (Arm) Feb. 22, 2019, 11:39 p.m. UTC | #1 
On Thu, 21 Feb 2019 16:46:30 +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Extend the bindings to cover the set of features found in Tegra186. Note
> that, technically, there are four more supplies connected to the XUSB
> pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL), but
> the power sequencing requirements of Tegra186 require these to be under
> the control of the PMIC.
> 
> Reviewed-by: JC Kuo <jckuo@nvidia.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  .../bindings/phy/nvidia,tegra124-xusb-padctl.txt         | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 3742c152c467..daedb15f322e 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -36,11 +36,20 @@  Required properties:
   - Tegra124: "nvidia,tegra124-xusb-padctl"
   - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
   - Tegra210: "nvidia,tegra210-xusb-padctl"
+  - Tegra186: "nvidia,tegra186-xusb-padctl"
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
 - reset-names: Must include the following entries:
   - "padctl"
 
+For Tegra186:
+- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY
+  power supply. Must supply 1.8 V.
+- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
+  3.3 V.
+- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
+- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
+
 
 Pad nodes:
 ==========