[v7,11/17] hw/arm/boot: Expose the PC-DIMM nodes in the DT
diff mbox series

Message ID 20190220224003.4420-12-eric.auger@redhat.com
State New
Headers show
Series
  • ARM virt: Initial RAM expansion and PCDIMM/NVDIMM support
Related show

Commit Message

Eric Auger Feb. 20, 2019, 10:39 p.m. UTC
From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>

This patch adds memory nodes corresponding to PC-DIMM regions.

NV_DIMM and ACPI_NVDIMM configs are not yet set for ARM so we
don't need to care about NV-DIMM at this stage.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>

---
v6 -> v7:
- rework the error messages, use a switch/case
v3 -> v4:
- git rid of @base and @len in fdt_add_hotpluggable_memory_nodes

v1 -> v2:
- added qapi_free_MemoryDeviceInfoList and simplify the loop
---
 hw/arm/boot.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

Comments

Igor Mammedov Feb. 22, 2019, 1:30 p.m. UTC | #1
On Wed, 20 Feb 2019 23:39:57 +0100
Eric Auger <eric.auger@redhat.com> wrote:

> From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
> 
> This patch adds memory nodes corresponding to PC-DIMM regions.
> 
> NV_DIMM and ACPI_NVDIMM configs are not yet set for ARM so we
  ^^^
git grep says it doesn't exists

> don't need to care about NV-DIMM at this stage.
we use NVDIMM term everywhere in QEMU so fix it up just for consistency

> 
> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
with all comments addressed

Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> 
> ---
> v6 -> v7:
> - rework the error messages, use a switch/case
> v3 -> v4:
> - git rid of @base and @len in fdt_add_hotpluggable_memory_nodes
> 
> v1 -> v2:
> - added qapi_free_MemoryDeviceInfoList and simplify the loop
> ---
>  hw/arm/boot.c | 42 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/hw/arm/boot.c b/hw/arm/boot.c
> index a830655e1a..255aaca0cf 100644
> --- a/hw/arm/boot.c
> +++ b/hw/arm/boot.c
> @@ -19,6 +19,7 @@
>  #include "sysemu/numa.h"
>  #include "hw/boards.h"
>  #include "hw/loader.h"
> +#include "hw/mem/memory-device.h"
>  #include "elf.h"
>  #include "sysemu/device_tree.h"
>  #include "qemu/config-file.h"
> @@ -522,6 +523,41 @@ static void fdt_add_psci_node(void *fdt)
>      qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn);
>  }
>  
> +static int fdt_add_hotpluggable_memory_nodes(void *fdt,
> +                                             uint32_t acells, uint32_t scells) {
> +    MemoryDeviceInfoList *info, *info_list = qmp_memory_device_list();
> +    MemoryDeviceInfo *mi;
> +    int ret = 0;
> +
> +    for (info = info_list; info != NULL; info = info->next) {
> +        mi = info->value;
> +        switch (mi->type) {
> +        case MEMORY_DEVICE_INFO_KIND_DIMM:
> +        {
> +            PCDIMMDeviceInfo *di = mi->u.dimm.data;
> +
> +            ret = fdt_add_memory_node(fdt, acells, di->addr,
> +                                      scells, di->size, di->node);
> +            if (ret) {
> +                fprintf(stderr,
> +                        "couldn't add PCDIMM /memory@%"PRIx64" node\n",
> +                        di->addr);
> +                goto out;
> +            }
> +            break;
> +        }
> +        default:
> +            fprintf(stderr, "%s memory nodes are not yet supported\n",
> +                    MemoryDeviceInfoKind_str(mi->type));
> +            ret = -ENOENT;
> +            goto out;
> +        }
> +    }
> +out:
> +    qapi_free_MemoryDeviceInfoList(info_list);
> +    return ret;
> +}
> +
>  int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
>                   hwaddr addr_limit, AddressSpace *as)
>  {
> @@ -621,6 +657,12 @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
>          }
>      }
>  
> +    rc = fdt_add_hotpluggable_memory_nodes(fdt, acells, scells);
> +    if (rc < 0) {
> +            fprintf(stderr, "couldn't add hotpluggable memory nodes\n");
> +            goto fail;
wrong indent

> +    }
> +
>      rc = fdt_path_offset(fdt, "/chosen");
>      if (rc < 0) {
>          qemu_fdt_add_subnode(fdt, "/chosen");

Patch
diff mbox series

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index a830655e1a..255aaca0cf 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -19,6 +19,7 @@ 
 #include "sysemu/numa.h"
 #include "hw/boards.h"
 #include "hw/loader.h"
+#include "hw/mem/memory-device.h"
 #include "elf.h"
 #include "sysemu/device_tree.h"
 #include "qemu/config-file.h"
@@ -522,6 +523,41 @@  static void fdt_add_psci_node(void *fdt)
     qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn);
 }
 
+static int fdt_add_hotpluggable_memory_nodes(void *fdt,
+                                             uint32_t acells, uint32_t scells) {
+    MemoryDeviceInfoList *info, *info_list = qmp_memory_device_list();
+    MemoryDeviceInfo *mi;
+    int ret = 0;
+
+    for (info = info_list; info != NULL; info = info->next) {
+        mi = info->value;
+        switch (mi->type) {
+        case MEMORY_DEVICE_INFO_KIND_DIMM:
+        {
+            PCDIMMDeviceInfo *di = mi->u.dimm.data;
+
+            ret = fdt_add_memory_node(fdt, acells, di->addr,
+                                      scells, di->size, di->node);
+            if (ret) {
+                fprintf(stderr,
+                        "couldn't add PCDIMM /memory@%"PRIx64" node\n",
+                        di->addr);
+                goto out;
+            }
+            break;
+        }
+        default:
+            fprintf(stderr, "%s memory nodes are not yet supported\n",
+                    MemoryDeviceInfoKind_str(mi->type));
+            ret = -ENOENT;
+            goto out;
+        }
+    }
+out:
+    qapi_free_MemoryDeviceInfoList(info_list);
+    return ret;
+}
+
 int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
                  hwaddr addr_limit, AddressSpace *as)
 {
@@ -621,6 +657,12 @@  int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
         }
     }
 
+    rc = fdt_add_hotpluggable_memory_nodes(fdt, acells, scells);
+    if (rc < 0) {
+            fprintf(stderr, "couldn't add hotpluggable memory nodes\n");
+            goto fail;
+    }
+
     rc = fdt_path_offset(fdt, "/chosen");
     if (rc < 0) {
         qemu_fdt_add_subnode(fdt, "/chosen");