Message ID | 1550570647-9555-5-git-send-email-p.paillet@st.com |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | STPMIC1 Fixes | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | "total: 0 errors, 1 warnings, 8 lines checked" |
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt index de27897..bf9385b 100644 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -23,8 +23,6 @@ Switches are fixed voltage regulators with only enable/disable capability. Optional properties: - st,mask-reset: mask reset for this regulator: the regulator configuration is maintained during pmic reset. -- regulator-pull-down: enable high pull down - if not specified light pull down is used - regulator-over-current-protection: if set, all regulators are switched off in case of over-current detection on this regulator,
Regulator high pull down are enabled by default so remove support in the driver. Signed-off-by: Pascal Paillet <p.paillet@st.com> --- Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt | 2 -- 1 file changed, 2 deletions(-)