[RFC,2/5] dt-bindings: mtd: Add binding documentation for Hyperbus memory devices
diff mbox series

Message ID 20190219063607.29949-3-vigneshr@ti.com
State Superseded
Headers show
  • MTD: Add Initial Hyperbus support
Related show

Commit Message

Vignesh Raghavendra Feb. 19, 2019, 6:36 a.m. UTC
Add DT binding documentation for Hyperbus memory devices. For now only
Hyperflash is supported.

Signed-off-by: Vignesh R <vigneshr@ti.com>
 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt

diff mbox series

diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
new file mode 100644
index 000000000000..cb408f80b868
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
@@ -0,0 +1,6 @@ 
+Bindings for Hyperflash NOR flash chips compliant with Cypress Hyperbus
+specification and supports Cypress CFI specification 1.5 command set.
+Required properties:
+- compatible : "cypress,hyperflash" for Hyperflash NOR chips
+- reg : Address where flash's memory mapped space