@@ -27,8 +27,11 @@
#include "hw/arm/armsse.h"
#include "hw/boards.h"
#include "hw/core/split-irq.h"
+#include "hw/misc/tz-ppc.h"
+#include "hw/misc/unimp.h"
#define MUSCA_NUMIRQ_MAX 96
+#define MUSCA_PPC_MAX 3
typedef enum MuscaType {
MUSCA_A,
@@ -48,6 +51,24 @@ typedef struct {
ARMSSE sse;
SplitIRQ cpu_irq_splitter[MUSCA_NUMIRQ_MAX];
+ SplitIRQ sec_resp_splitter;
+ TZPPC ppc[MUSCA_PPC_MAX];
+ MemoryRegion container;
+ UnimplementedDeviceState eflash[2];
+ UnimplementedDeviceState qspi;
+ UnimplementedDeviceState mpc[5];
+ UnimplementedDeviceState mhu[2];
+ UnimplementedDeviceState pwm[3];
+ UnimplementedDeviceState i2s;
+ UnimplementedDeviceState uart[2];
+ UnimplementedDeviceState i2c[2];
+ UnimplementedDeviceState spi;
+ UnimplementedDeviceState scc;
+ UnimplementedDeviceState timer;
+ UnimplementedDeviceState rtc;
+ UnimplementedDeviceState pvt;
+ UnimplementedDeviceState sdio;
+ UnimplementedDeviceState gpio;
} MuscaMachineState;
#define TYPE_MUSCA_MACHINE "musca"
@@ -68,6 +89,94 @@ typedef struct {
*/
#define SYSCLK_FRQ 40000000
+/*
+ * Most of the devices in the Musca board sit behind Peripheral Protection
+ * Controllers. These data structures define the layout of which devices
+ * sit behind which PPCs.
+ * The devfn for each port is a function which creates, configures
+ * and initializes the device, returning the MemoryRegion which
+ * needs to be plugged into the downstream end of the PPC port.
+ */
+typedef MemoryRegion *MakeDevFn(MuscaMachineState *mms, void *opaque,
+ const char *name, hwaddr size);
+
+typedef struct PPCPortInfo {
+ const char *name;
+ MakeDevFn *devfn;
+ void *opaque;
+ hwaddr addr;
+ hwaddr size;
+} PPCPortInfo;
+
+typedef struct PPCInfo {
+ const char *name;
+ PPCPortInfo ports[TZ_NUM_PORTS];
+} PPCInfo;
+
+static MemoryRegion *make_unimp_dev(MuscaMachineState *mms,
+ void *opaque, const char *name, hwaddr size)
+{
+ /*
+ * Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE,
+ * and return a pointer to its MemoryRegion.
+ */
+ UnimplementedDeviceState *uds = opaque;
+
+ sysbus_init_child_obj(OBJECT(mms), name, uds,
+ sizeof(UnimplementedDeviceState),
+ TYPE_UNIMPLEMENTED_DEVICE);
+ qdev_prop_set_string(DEVICE(uds), "name", name);
+ qdev_prop_set_uint64(DEVICE(uds), "size", size);
+ object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal);
+ return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0);
+}
+
+static MemoryRegion *make_musca_a_devs(MuscaMachineState *mms, void *opaque,
+ const char *name, hwaddr size)
+{
+ /*
+ * Create the container MemoryRegion for all the devices that live
+ * behind the Musca-A PPC's single port. These devices don't have a PPC
+ * port each, but we use the PPCPortInfo struct as a convenient way
+ * to describe them. Note that addresses here are relative to the base
+ * address of the PPC port region: 0x40100000, and devices appear both
+ * at the 0x4... NS region and the 0x5... S region.
+ */
+ int i;
+ MemoryRegion *container = &mms->container;
+
+ const PPCPortInfo devices[] = {
+ { "uart0", make_unimp_dev, &mms->uart[0], 0x1000, 0x1000 },
+ { "uart1", make_unimp_dev, &mms->uart[1], 0x2000, 0x1000 },
+ { "spi", make_unimp_dev, &mms->spi, 0x3000, 0x1000 },
+ { "i2c0", make_unimp_dev, &mms->i2c[0], 0x4000, 0x1000 },
+ { "i2c1", make_unimp_dev, &mms->i2c[1], 0x5000, 0x1000 },
+ { "i2s", make_unimp_dev, &mms->i2s, 0x6000, 0x1000 },
+ { "pwm0", make_unimp_dev, &mms->pwm[0], 0x7000, 0x1000 },
+ { "rtc", make_unimp_dev, &mms->rtc, 0x8000, 0x1000 },
+ { "qspi", make_unimp_dev, &mms->qspi, 0xa000, 0x1000 },
+ { "timer", make_unimp_dev, &mms->timer, 0xb000, 0x1000 },
+ { "scc", make_unimp_dev, &mms->scc, 0xc000, 0x1000 },
+ { "pwm1", make_unimp_dev, &mms->pwm[1], 0xe000, 0x1000 },
+ { "pwm2", make_unimp_dev, &mms->pwm[2], 0xf000, 0x1000 },
+ { "gpio", make_unimp_dev, &mms->gpio, 0x10000, 0x1000 },
+ { "mpc0", make_unimp_dev, &mms->mpc[0], 0x12000, 0x1000 },
+ { "mpc1", make_unimp_dev, &mms->mpc[1], 0x13000, 0x1000 },
+ };
+
+ memory_region_init(container, OBJECT(mms), "musca-device-container", size);
+
+ for (i = 0; i < ARRAY_SIZE(devices); i++) {
+ const PPCPortInfo *pinfo = &devices[i];
+ MemoryRegion *mr;
+
+ mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size);
+ memory_region_add_subregion(container, pinfo->addr, mr);
+ }
+
+ return &mms->container;
+}
+
static void musca_init(MachineState *machine)
{
MuscaMachineState *mms = MUSCA_MACHINE(machine);
@@ -75,6 +184,9 @@ static void musca_init(MachineState *machine)
MachineClass *mc = MACHINE_GET_CLASS(machine);
MemoryRegion *system_memory = get_system_memory();
DeviceState *ssedev;
+ DeviceState *dev_splitter;
+ const PPCInfo *ppcs;
+ int num_ppcs;
int i;
assert(mmc->num_irqs <= MUSCA_NUMIRQ_MAX);
@@ -121,6 +233,183 @@ static void musca_init(MachineState *machine)
"EXP_CPU1_IRQ", i));
}
+ /*
+ * The sec_resp_cfg output from the SSE-200 must be split into multiple
+ * lines, one for each of the PPCs we create here.
+ */
+ object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter),
+ TYPE_SPLIT_IRQ);
+ object_property_add_child(OBJECT(machine), "sec-resp-splitter",
+ OBJECT(&mms->sec_resp_splitter), &error_fatal);
+ object_property_set_int(OBJECT(&mms->sec_resp_splitter),
+ ARRAY_SIZE(mms->ppc), "num-lines", &error_fatal);
+ object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true,
+ "realized", &error_fatal);
+ dev_splitter = DEVICE(&mms->sec_resp_splitter);
+ qdev_connect_gpio_out_named(ssedev, "sec_resp_cfg", 0,
+ qdev_get_gpio_in(dev_splitter, 0));
+
+ /*
+ * Most of the devices in the board are behind Peripheral Protection
+ * Controllers. The required order for initializing things is:
+ * + initialize the PPC
+ * + initialize, configure and realize downstream devices
+ * + connect downstream device MemoryRegions to the PPC
+ * + realize the PPC
+ * + map the PPC's MemoryRegions to the places in the address map
+ * where the downstream devices should appear
+ * + wire up the PPC's control lines to the SSE object
+ *
+ * The PPC mapping differs for the -A and -B1 variants; the -A version
+ * is much simpler, using only a single port of a single PPC and putting
+ * all the devices behind that.
+ */
+ const PPCInfo a_ppcs[] = { {
+ .name = "ahb_ppcexp0",
+ .ports = {
+ { "musca-devices", make_musca_a_devs, 0, 0x40100000, 0x100000 },
+ },
+ },
+ };
+
+ /*
+ * Devices listed with an 0x4.. address appear in both the NS 0x4.. region
+ * and the 0x5.. S region. Devices listed with an 0x5.. address appear
+ * only in the S region.
+ */
+ const PPCInfo b1_ppcs[] = { {
+ .name = "apb_ppcexp0",
+ .ports = {
+ { "eflash0", make_unimp_dev, &mms->eflash[0],
+ 0x52400000, 0x1000 },
+ { "eflash1", make_unimp_dev, &mms->eflash[1],
+ 0x52500000, 0x1000 },
+ { "qspi", make_unimp_dev, &mms->qspi, 0x42800000, 0x100000 },
+ { "mpc0", make_unimp_dev, &mms->mpc[0], 0x52000000, 0x1000 },
+ { "mpc1", make_unimp_dev, &mms->mpc[1], 0x52100000, 0x1000 },
+ { "mpc2", make_unimp_dev, &mms->mpc[2], 0x52200000, 0x1000 },
+ { "mpc3", make_unimp_dev, &mms->mpc[3], 0x52300000, 0x1000 },
+ { "mhu0", make_unimp_dev, &mms->mhu[0], 0x42600000, 0x100000 },
+ { "mhu1", make_unimp_dev, &mms->mhu[1], 0x42700000, 0x100000 },
+ { }, /* port 9: unused */
+ { }, /* port 10: unused */
+ { }, /* port 11: unused */
+ { }, /* port 12: unused */
+ { }, /* port 13: unused */
+ { "mpc4", make_unimp_dev, &mms->mpc[4], 0x52e00000, 0x1000 },
+ },
+ }, {
+ .name = "apb_ppcexp1",
+ .ports = {
+ { "pwm0", make_unimp_dev, &mms->pwm[0], 0x40101000, 0x1000 },
+ { "pwm1", make_unimp_dev, &mms->pwm[1], 0x40102000, 0x1000 },
+ { "pwm2", make_unimp_dev, &mms->pwm[2], 0x40103000, 0x1000 },
+ { "i2s", make_unimp_dev, &mms->i2s, 0x40104000, 0x1000 },
+ { "uart0", make_unimp_dev, &mms->uart[0], 0x40105000, 0x1000 },
+ { "uart1", make_unimp_dev, &mms->uart[1], 0x40106000, 0x1000 },
+ { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40108000, 0x1000 },
+ { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40109000, 0x1000 },
+ { "spi", make_unimp_dev, &mms->spi, 0x4010a000, 0x1000 },
+ { "scc", make_unimp_dev, &mms->scc, 0x5010b000, 0x1000 },
+ { "timer", make_unimp_dev, &mms->timer, 0x4010c000, 0x1000 },
+ { "rtc", make_unimp_dev, &mms->rtc, 0x4010d000, 0x1000 },
+ { "pvt", make_unimp_dev, &mms->pvt, 0x4010e000, 0x1000 },
+ { "sdio", make_unimp_dev, &mms->sdio, 0x4010f000, 0x1000 },
+ },
+ }, {
+ .name = "ahb_ppcexp0",
+ .ports = {
+ { }, /* port 0: unused */
+ { "gpio", make_unimp_dev, &mms->gpio, 0x41000000, 0x1000 },
+ },
+ },
+ };
+
+ switch (mmc->type) {
+ case MUSCA_A:
+ ppcs = a_ppcs;
+ num_ppcs = ARRAY_SIZE(a_ppcs);
+ break;
+ case MUSCA_B1:
+ ppcs = b1_ppcs;
+ num_ppcs = ARRAY_SIZE(b1_ppcs);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ assert(num_ppcs <= MUSCA_PPC_MAX);
+
+ for (i = 0; i < num_ppcs; i++) {
+ const PPCInfo *ppcinfo = &ppcs[i];
+ TZPPC *ppc = &mms->ppc[i];
+ DeviceState *ppcdev;
+ int port;
+ char *gpioname;
+
+ sysbus_init_child_obj(OBJECT(machine), ppcinfo->name, ppc,
+ sizeof(TZPPC), TYPE_TZ_PPC);
+ ppcdev = DEVICE(ppc);
+
+ for (port = 0; port < TZ_NUM_PORTS; port++) {
+ const PPCPortInfo *pinfo = &ppcinfo->ports[port];
+ MemoryRegion *mr;
+ char *portname;
+
+ if (!pinfo->devfn) {
+ continue;
+ }
+
+ mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size);
+ portname = g_strdup_printf("port[%d]", port);
+ object_property_set_link(OBJECT(ppc), OBJECT(mr),
+ portname, &error_fatal);
+ g_free(portname);
+ }
+
+ object_property_set_bool(OBJECT(ppc), true, "realized", &error_fatal);
+
+ for (port = 0; port < TZ_NUM_PORTS; port++) {
+ const PPCPortInfo *pinfo = &ppcinfo->ports[port];
+
+ if (!pinfo->devfn) {
+ continue;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(ppc), port, pinfo->addr);
+
+ gpioname = g_strdup_printf("%s_nonsec", ppcinfo->name);
+ qdev_connect_gpio_out_named(ssedev, gpioname, port,
+ qdev_get_gpio_in_named(ppcdev,
+ "cfg_nonsec",
+ port));
+ g_free(gpioname);
+ gpioname = g_strdup_printf("%s_ap", ppcinfo->name);
+ qdev_connect_gpio_out_named(ssedev, gpioname, port,
+ qdev_get_gpio_in_named(ppcdev,
+ "cfg_ap", port));
+ g_free(gpioname);
+ }
+
+ gpioname = g_strdup_printf("%s_irq_enable", ppcinfo->name);
+ qdev_connect_gpio_out_named(ssedev, gpioname, 0,
+ qdev_get_gpio_in_named(ppcdev,
+ "irq_enable", 0));
+ g_free(gpioname);
+ gpioname = g_strdup_printf("%s_irq_clear", ppcinfo->name);
+ qdev_connect_gpio_out_named(ssedev, gpioname, 0,
+ qdev_get_gpio_in_named(ppcdev,
+ "irq_clear", 0));
+ g_free(gpioname);
+ gpioname = g_strdup_printf("%s_irq_status", ppcinfo->name);
+ qdev_connect_gpio_out_named(ppcdev, "irq", 0,
+ qdev_get_gpio_in_named(ssedev,
+ gpioname, 0));
+ g_free(gpioname);
+
+ qdev_connect_gpio_out(dev_splitter, i,
+ qdev_get_gpio_in_named(ppcdev,
+ "cfg_sec_resp", 0));
+ }
+
armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x2000000);
}
Many of the devices on the Musca board live behind TrustZone Peripheral Protection Controllers (PPCs); add models of the PPCs, using a similar scheme to the MPS2 board models. This commit wires up the PPCs with "unimplemented device" stubs behind them in the correct places in the address map. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musca.c | 289 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 289 insertions(+)