| Message ID | 20190213150508.11499-3-m.othacehe@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] pwm: hibvt: Use individual struct per of-data. | expand |
On Wed, Feb 13, 2019 at 04:05:08PM +0100, Mathieu Othacehe wrote: > Add support for hi3559v100-shub-pwm and hisilicon,hi3559v100-pwm > platforms. They require a special quirk: pwm has to be enabled again > to force duty_cycle refresh. > > Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> > --- > drivers/pwm/pwm-hibvt.c | 28 +++++++++++++++++++++++++++- > 1 file changed, 27 insertions(+), 1 deletion(-) > > diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c > index ffc803818c3c..b6a7942b3367 100644 > --- a/drivers/pwm/pwm-hibvt.c > +++ b/drivers/pwm/pwm-hibvt.c > @@ -54,6 +54,7 @@ struct hibvt_pwm_chip { > > struct hibvt_pwm_soc { > u32 num_pwms; > + bool quirk_force_enable; > }; > > static const struct hibvt_pwm_soc hi3516cv300_soc_info = { > @@ -64,6 +65,16 @@ static const struct hibvt_pwm_soc hi3519v100_soc_info = { > .num_pwms = 8, > }; > > +static const struct hibvt_pwm_soc hi3559v100_shub_soc_info = { > + .num_pwms = 8, > + .quirk_force_enable = true, > +}; > + > +static const struct hibvt_pwm_soc hi3559v100_soc_info = { > + .num_pwms = 2, > + .quirk_force_enable = true, > +}; > + > static inline struct hibvt_pwm_chip *to_hibvt_pwm_chip(struct pwm_chip *chip) > { > return container_of(chip, struct hibvt_pwm_chip, chip); > @@ -152,13 +163,24 @@ static void hibvt_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, > static int hibvt_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, > struct pwm_state *state) > { > + struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip); > + > if (state->polarity != pwm->state.polarity) > hibvt_pwm_set_polarity(chip, pwm, state->polarity); > > if (state->period != pwm->state.period || > - state->duty_cycle != pwm->state.duty_cycle) > + state->duty_cycle != pwm->state.duty_cycle) { > hibvt_pwm_config(chip, pwm, state->duty_cycle, state->period); I would prefer to have the continued line in the if condition aligned to the opening parenthesis. Then it is optically separated from the first expression in the body of the if. > > + /* > + * On those platforms, it is required to enable the Which platforms? I think in a previous round it was obvious what was meant here because there was a test against two specific compatibles. Now something like Some implementations require the pwm to be enabled once more each time the duty cycle is refreshed. would be more suitable. Is there a publicly available reference manual available for the newly supported hardware? Best regards Uwe
diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c index ffc803818c3c..b6a7942b3367 100644 --- a/drivers/pwm/pwm-hibvt.c +++ b/drivers/pwm/pwm-hibvt.c @@ -54,6 +54,7 @@ struct hibvt_pwm_chip { struct hibvt_pwm_soc { u32 num_pwms; + bool quirk_force_enable; }; static const struct hibvt_pwm_soc hi3516cv300_soc_info = { @@ -64,6 +65,16 @@ static const struct hibvt_pwm_soc hi3519v100_soc_info = { .num_pwms = 8, }; +static const struct hibvt_pwm_soc hi3559v100_shub_soc_info = { + .num_pwms = 8, + .quirk_force_enable = true, +}; + +static const struct hibvt_pwm_soc hi3559v100_soc_info = { + .num_pwms = 2, + .quirk_force_enable = true, +}; + static inline struct hibvt_pwm_chip *to_hibvt_pwm_chip(struct pwm_chip *chip) { return container_of(chip, struct hibvt_pwm_chip, chip); @@ -152,13 +163,24 @@ static void hibvt_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, static int hibvt_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { + struct hibvt_pwm_chip *hi_pwm_chip = to_hibvt_pwm_chip(chip); + if (state->polarity != pwm->state.polarity) hibvt_pwm_set_polarity(chip, pwm, state->polarity); if (state->period != pwm->state.period || - state->duty_cycle != pwm->state.duty_cycle) + state->duty_cycle != pwm->state.duty_cycle) { hibvt_pwm_config(chip, pwm, state->duty_cycle, state->period); + /* + * On those platforms, it is required to enable the + * pwm again each time we want to refresh the duty + * cycle. + */ + if (hi_pwm_chip->soc->quirk_force_enable && state->enabled) + hibvt_pwm_enable(chip, pwm); + } + if (state->enabled != pwm->state.enabled) { if (state->enabled) hibvt_pwm_enable(chip, pwm); @@ -259,6 +281,10 @@ static const struct of_device_id hibvt_pwm_of_match[] = { .data = &hi3516cv300_soc_info }, { .compatible = "hisilicon,hi3519v100-pwm", .data = &hi3519v100_soc_info }, + { .compatible = "hisilicon,hi3559v100-shub-pwm", + .data = &hi3559v100_shub_soc_info }, + { .compatible = "hisilicon,hi3559v100-pwm", + .data = &hi3559v100_soc_info }, { } }; MODULE_DEVICE_TABLE(of, hibvt_pwm_of_match);
Add support for hi3559v100-shub-pwm and hisilicon,hi3559v100-pwm platforms. They require a special quirk: pwm has to be enabled again to force duty_cycle refresh. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> --- drivers/pwm/pwm-hibvt.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)