| Message ID | 20190212140259.9537-3-narmstrong@baylibre.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | arm64: dts: Add SEI Robotics SEI510 Board support | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | "total: 0 errors, 3 warnings, 52 lines checked" |
Neil Armstrong <narmstrong@baylibre.com> writes: > The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2 > and has the following features : > - Amlogic G12A S905X2 SoC > - 10/100 Ethernet > - USB2 + USB3 ports > - Micro SDCard Port > - Audio + CVBS AV Jack port > - HDMI 2.1 + CEC Port > - ADC Touch Button > - Far-Field Microphone Array + Mono HP > - IR Sensor > - IR Emmiter LED Array > - RGB Led > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [...] > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index 0821fed4c074..2709f7ede908 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -1,6 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb nit: not sorted alphabetically. I'll move it bofore u200 when applying. Thanks for the new board support! Kevin
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 7f40cb5f490b..061f7b98a07f 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -110,6 +110,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,u200" (Meson g12a s905d2) - "amediatech,x96-max" (Meson g12a s905x2) + - "seirobotics,sei510" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0821fed4c074..2709f7ede908 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts new file mode 100644 index 000000000000..6a7c3241862a --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "seirobotics,sei510", "amlogic,g12a"; + model = "SEI Robotics SEI510"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; +}; + +&uart_AO { + status = "okay"; +};
The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2 and has the following features : - Amlogic G12A S905X2 SoC - 10/100 Ethernet - USB2 + USB3 ports - Micro SDCard Port - Audio + CVBS AV Jack port - HDMI 2.1 + CEC Port - ADC Touch Button - Far-Field Microphone Array + Mono HP - IR Sensor - IR Emmiter LED Array - RGB Led Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../devicetree/bindings/arm/amlogic.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12a-sei510.dts | 38 +++++++++++++++++++ 3 files changed, 40 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts