From patchwork Tue Feb 12 13:01:13 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daire McNamara X-Patchwork-Id: 1040556 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=microchip.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 43zN810mnlz9s4Z for ; Wed, 13 Feb 2019 00:01:21 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727428AbfBLNBU (ORCPT ); Tue, 12 Feb 2019 08:01:20 -0500 Received: from esa5.microchip.iphmx.com ([216.71.150.166]:23626 "EHLO esa5.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726550AbfBLNBT (ORCPT ); Tue, 12 Feb 2019 08:01:19 -0500 X-IronPort-AV: E=Sophos;i="5.58,362,1544511600"; d="scan'208,223";a="24522280" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa5.microchip.iphmx.com with ESMTP/TLS/DHE-RSA-AES256-SHA; 12 Feb 2019 06:01:19 -0700 Received: from microchip.com (10.10.76.4) by chn-sv-exch05.mchp-main.com (10.10.76.106) with Microsoft SMTP Server id 14.3.352.0; Tue, 12 Feb 2019 06:01:17 -0700 Date: Tue, 12 Feb 2019 13:01:13 +0000 From: Daire McNamara To: CC: Subject: [PATCH v2] Add Microchip/Microsemi PolarFire-SoC PCIe support Message-ID: <20190212130112.GA1765@microchip.com> MIME-Version: 1.0 Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add Microchip/Microsemi PolarFire-SoC PCIe support Signed-off-by: Daire McNamara --- Hello! This patch adds support for PCIe IP block on Microsemi/Microchip PolarFire SoCs Updates since v1: o Incorporate feedback from Bjorn Helgaas. Thanx,Daire Daire McNamara (1): Add Microchip/Microsemi PolarFire-SoC PCIe support .../bindings/pci/microsemi-pcie.txt | 65 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/pci/controller/Kconfig | 8 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pcie-microsemi.c | 764 ++++++++++++++++++ 5 files changed, 839 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/microsemi-pcie.txt create mode 100644 drivers/pci/controller/pcie-microsemi.c From 9ea64e087b4ad9fe29f52a36088d192dbb2fe67c Mon Sep 17 00:00:00 2001 From: Daire McNamara Date: Tue, 29 Jan 2019 11:27:58 +0000 Subject: [PATCH] Add Microchip/Microsemi PolarFire-SoC PCIe support --- .../bindings/pci/microsemi-pcie.txt | 65 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/pci/controller/Kconfig | 8 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pcie-microsemi.c | 764 ++++++++++++++++++ 5 files changed, 839 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/microsemi-pcie.txt create mode 100644 drivers/pci/controller/pcie-microsemi.c diff --git a/Documentation/devicetree/bindings/pci/microsemi-pcie.txt b/Documentation/devicetree/bindings/pci/microsemi-pcie.txt new file mode 100644 index 000000000000..a16e48806edc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/microsemi-pcie.txt @@ -0,0 +1,65 @@ +* Microsemi AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "microsemi,ms-pf-axi-pcie-host" +- reg: Should contain AXI PCIe registers location and length +- device_type: must be "pci" +- interrupts: Should contain AXI PCIe interrupt +- interrupt-map-mask, + interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation + +Optional properties for PolarFire: +- bus-range: PCI bus numbers covered + +Interrupt controller child node ++++++++++++++++++++++++++++++++ +Required properties: +- interrupt-controller: identifies the node as an interrupt controller +- #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + +NOTE: +The core provides a single interrupt for both INTx/MSI messages. So, +create an interrupt controller node to support 'interrupt-map' DT +functionality. The driver will create an IRQ domain for this map, decode +the four INTx interrupts in ISR and route them to this domain. + + +Example: +++++++++ +AloeVera: + + pcie: pcie@2030000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "microsemi,ms-pf-axi-pcie-host"; + device_type = "pci"; + bus-range = <0x01 0x7f>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-parent = <&L4>; + interrupts = <32>; + ranges = <0x3000000 0 0x40000000 0x0 0x40000000 0x0 0x20000000>; + reg = <0x20 0x30000000 0x0 0x4000000 0x20 0x0 0x0 0x100000>; + reg-names = "control", "apb"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 4b1a2a8fcc16..d13f6e40dbf4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -238,6 +238,7 @@ micrel Micrel Inc. microchip Microchip Technology Inc. microcrystal Micro Crystal AG micron Micron Technology Inc. +microsemi Microsemi Corporation mikroe MikroElektronika d.o.o. minix MINIX Technology Ltd. miramems MiraMEMS Sensing Technology Co., Ltd. diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 6671946dbf66..31fa5e53d765 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -280,5 +280,13 @@ config VMD To compile this driver as a module, choose M here: the module will be called vmd. +config PCIE_MICROSEMI + bool "Microsemi AXI PCIe host bridge support" + depends on PCI_MSI && OF + help + Say 'Y' here if you want kernel to support the Microsemi AXI PCIe + Host Bridge driver. + + source "drivers/pci/controller/dwc/Kconfig" endmenu diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index d56a507495c5..c3b76ff221be 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o +obj-$(CONFIG_PCIE_MICROSEMI) += pcie-microsemi.o obj-$(CONFIG_VMD) += vmd.o # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ diff --git a/drivers/pci/controller/pcie-microsemi.c b/drivers/pci/controller/pcie-microsemi.c new file mode 100644 index 000000000000..60e185bebc60 --- /dev/null +++ b/drivers/pci/controller/pcie-microsemi.c @@ -0,0 +1,764 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PCIe host controller driver for Microsemi AXI PCIe Bridge + * + * Copyright (c) 2018 - 2019 Microsemi Corporation. + * + * Based on: + * pcie-rcar.c + * pcie-xilinx.c + * pcie-altera.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../pci.h" + +/* ECAM definitions */ +#define ECAM_BUS_NUM_SHIFT 20 +#define ECAM_DEV_NUM_SHIFT 12 + +/* Number of MSI IRQs */ +#define MICROSEMI_NUM_MSI_IRQS 32 +#define MICROSEMI_NUM_MSI_IRQS_CODED 5 + +/* PCIe Bridge Phy and Controller Phy offsets */ +#define MICROSEMI_PCIE0_BRIDGE_ADDR 0x00004000u +#define MICROSEMI_PCIE0_CTRL_ADDR 0x00006000u + +#define MICROSEMI_PCIE1_BRIDGE_ADDR 0x00008000u +#define MICROSEMI_PCIE1_CTRL_ADDR 0x0000a000u + +/* PCIe Controller Phy Regs */ +#define MICROSEMI_SEC_ERROR_INT 0x28 +#define SEC_ERROR_INT_TX_RAM_SEC_ERR_INT GENMASK(3, 0) +#define SEC_ERROR_INT_RX_RAM_SEC_ERR_INT GENMASK(7, 4) +#define SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT GENMASK(11, 8) +#define SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT GENMASK(15, 12) +#define MICROSEMI_SEC_ERROR_INT_MASK 0x2c +#define MICROSEMI_DED_ERROR_INT 0x30 +#define DED_ERROR_INT_TX_RAM_DED_ERR_INT GENMASK(3, 0) +#define DED_ERROR_INT_RX_RAM_DED_ERR_INT GENMASK(7, 4) +#define DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT GENMASK(11, 8) +#define DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT GENMASK(15, 12) +#define MICROSEMI_DED_ERROR_INT_MASK 0x34 +#define MICROSEMI_ECC_CONTROL 0x38 +#define ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS BIT(27) +#define ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS BIT(26) +#define ECC_CONTROL_RX_RAM_ECC_BYPASS BIT(25) +#define ECC_CONTROL_TX_RAM_ECC_BYPASS BIT(24) +#define MICROSEMI_LTSSM_STATE 0x5c +#define MICROSEMI_LTSSM_L0_STATE 0x10 +#define MICROSEMI_PCIE_EVENT_INT 0x14c +#define PCIE_EVENT_INT_L2_EXIT_INT BIT(0) +#define PCIE_EVENT_INT_HOTRST_EXIT_INT BIT(1) +#define PCIE_EVENT_INT_DLUP_EXIT_INT BIT(2) +#define PCIE_EVENT_INT_L2_EXIT_INT_MASK BIT(16) +#define PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK BIT(17) +#define PCIE_EVENT_INT_DLUP_EXIT_INT_MASK BIT(18) + +/* PCIe Bridge Phy Regs */ +#define MICROSEMI_PCIE_PCI_IDS_DW1 0x9c +#define MICROSEMI_IMASK_LOCAL 0x180 +#define MICROSEMI_PCIE_LOCAL_INT_ENABLE 0x0f000000u +#define MICROSEMI_PCI_INTS 0x0f000000u +#define MICROSEMI_PM_MSI_INT_SHIFT 24 +#define MICROSEMI_PCIE_ENABLE_MSI 0x10000000u +#define MICROSEMI_MSI_INT 0x10000000u +#define MICROSEMI_MSI_INT_SHIFT 28 +#define MICROSEMI_ISTATUS_LOCAL 0x184 +#define MICROSEMI_IMASK_HOST 0x188 +#define MICROSEMI_ISTATUS_HOST 0x18c +#define MICROSEMI_ISTATUS_MSI 0x194 + +/* PCIe AXI slave table init defines */ +#define MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u +#define ATR_SIZE_SHIFT 1 +#define ATR_IMPL_ENABLE 1 +#define MICROSEMI_ATR0_AXI4_SLV0_SRC_ADDR 0x804u +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM 0x810u +#define MICROSEMI_PCIE_TX_RX_INTERFACE 0x00000000u +#define MICROSEMI_PCIE_CONFIG_INTERFACE 0x00000001u + +#define MICROSEMI_ATR0_AXI4_SLV_SIZE 32 + +/* PCIe Master table init defines */ +#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12 0x600u +#define MICROSEMI_ATR0_PCIE_WIN0_SIZE 0x1f +#define MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT 1 +#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32 0x604u + +#define MICROSEMI_MSI_MSG_ADDR 0x190u + +/* PCIe Config space MSI capability structure */ +#define MSI_CAP_CTRL_OFFSET 0xe0u +#define MSI_ENABLE (0x01u << 16) +#define MSI_ENABLE_MULTI (MICROSEMI_NUM_MSI_IRQS_CODED << 20) +#define MSI_MSG_ADDR_OFFSET 0xe4u +#define MSI_MSG_UPPER_ADDR_OFFSET 0xe8u +#define MSI_MSG_DATA_OFFSET 0xf0u + +/** + * struct microsemi_pcie_port - PCIe port information + * @pcie_base_addr: IO Mapped Register Base + * @axi_base_addr: AMBA Mapped Register Base + * @irq: Interrupt number + * @root_busno: Root Bus number + * @dev: Device pointer + * @msi_domain: MSI IRQ domain pointer + * @leg_domain: Legacy IRQ domain pointer + * @resources: Bus Resources + */ +struct microsemi_pcie_port { + struct platform_device *pdev; + void __iomem *pcie_base_addr; + void __iomem *axi_base_addr; + void __iomem *bridge_base_addr; + void __iomem *ctrl_base_addr; + int bridge; + u32 irq; + u8 root_busno; + struct device *dev; + struct irq_domain *msi_domain; + struct irq_domain *leg_domain; + struct list_head resources; + struct mutex lock; /* protect bitmap variable */ + DECLARE_BITMAP(msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS); +}; + +static inline u32 pcie_read(struct microsemi_pcie_port *port, u32 reg) +{ + return readl(port->pcie_base_addr + reg); +} + +static inline void pcie_write(struct microsemi_pcie_port *port, + u32 val, u32 reg) +{ + writel(val, port->pcie_base_addr + reg); +} + +static void microsemi_pcie_enable(struct microsemi_pcie_port *port) +{ + u32 enb; + + enb = readl(port->bridge_base_addr + MICROSEMI_LTSSM_STATE); + enb |= MICROSEMI_LTSSM_L0_STATE; + writel(enb, port->bridge_base_addr + MICROSEMI_LTSSM_STATE); +} + +/** + * microsemi_pcie_valid_device - Check if a valid device is present on bus + * @bus: PCI Bus structure + * @devfn: device/function + * + * Return: 'true' on success and 'false' if invalid device is found + */ +static bool microsemi_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) +{ + struct microsemi_pcie_port *port = bus->sysdata; + + /* Only one device down on each root port */ + if (bus->number == port->root_busno && devfn > 0) + return false; + + return true; +} + +/** + * microsemi_pcie_map_bus - Get configuration base + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * + * Return: Base address of the configuration space needed to be + * accessed. + */ +static void __iomem *microsemi_pcie_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) +{ + struct microsemi_pcie_port *port = bus->sysdata; + int relbus; + + if (!microsemi_pcie_valid_device(bus, devfn)) + return NULL; + + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | + (devfn << ECAM_DEV_NUM_SHIFT); + + return port->pcie_base_addr + relbus + where; +} + +/* PCIe operations */ +static struct pci_ops microsemi_pcie_ops = { + .map_bus = microsemi_pcie_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +/* MSI functions */ + +/** + * microsemi_pcie_destroy_msi - Free MSI number + * @irq: IRQ to be freed + */ +static void microsemi_pcie_destroy_msi(unsigned int irq) +{ + struct microsemi_pcie_port *port = + msi_desc_to_pci_sysdata(irq_get_msi_desc(irq)); + irq_hw_number_t hwirq = irqd_to_hwirq(irq_get_irq_data(irq)); + + if (!port) + return; + + if (!test_bit(hwirq, port->msi_irq_in_use)) + dev_err(port->dev, "trying to free unused MSI%d\n", irq); + else + clear_bit(hwirq, port->msi_irq_in_use); +} + +/** + * microsemi_pcie_assign_msi - Allocate MSI number + * + * Return: A valid IRQ on success and error value on failure. + */ +static int microsemi_pcie_assign_msi(struct microsemi_pcie_port *port) +{ + int pos; + + mutex_lock(&port->lock); + pos = find_first_zero_bit(port->msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS); + if (pos < MICROSEMI_NUM_MSI_IRQS) { + set_bit(pos, port->msi_irq_in_use); + } else { + mutex_unlock(&port->lock); + return -ENOSPC; + } + + mutex_unlock(&port->lock); + return pos; +} + +/** + * microsemi_msi_teardown_irq - Destroy the MSI + * @chip: MSI Chip descriptor + * @irq: MSI IRQ to destroy + */ +static void microsemi_msi_teardown_irq(struct msi_controller *chip, + unsigned int irq) +{ + microsemi_pcie_destroy_msi(irq); + irq_dispose_mapping(irq); +} + +/** + * microsemi_pcie_msi_setup_irq - Setup MSI request + * @chip: MSI chip pointer + * @pdev: PCIe device pointer + * @desc: MSI descriptor pointer + * + * Return: '0' on success and error value on failure + */ +static int microsemi_pcie_msi_setup_irq(struct msi_controller *chip, + struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct microsemi_pcie_port *port = pdev->bus->sysdata; + unsigned int irq; + int hwirq; + struct msi_msg msg; + + hwirq = microsemi_pcie_assign_msi(port); + if (hwirq < 0) + return hwirq; + + irq = irq_create_mapping(port->msi_domain, hwirq); + if (!irq) + return -EINVAL; + + irq_set_msi_desc(irq, desc); + + msg.address_hi = upper_32_bits(MICROSEMI_MSI_MSG_ADDR); + msg.address_lo = lower_32_bits(MICROSEMI_MSI_MSG_ADDR); + msg.data = hwirq; + + pci_write_msi_msg(irq, &msg); + + return 0; +} + +/* MSI Chip Descriptor */ +static struct msi_controller microsemi_pcie_msi_chip = { + .setup_irq = microsemi_pcie_msi_setup_irq, + .teardown_irq = microsemi_msi_teardown_irq, +}; + +/* HW Interrupt Chip Descriptor */ +static struct irq_chip microsemi_msi_irq_chip = { + .name = "Microsemi PCIe MSI", + .irq_enable = pci_msi_unmask_irq, + .irq_disable = pci_msi_mask_irq, + .irq_mask = pci_msi_mask_irq, + .irq_unmask = pci_msi_unmask_irq, +}; + +/** + * microsemi_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int microsemi_pcie_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, µsemi_msi_irq_chip, + handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + + return 0; +} + +/* IRQ Domain operations */ +static const struct irq_domain_ops msi_domain_ops = { + .map = microsemi_pcie_msi_map, +}; + +/** + * microsemi_pcie_enable_msi - Enable MSI support + * @port: PCIe port information + */ +static void microsemi_pcie_enable_msi(struct microsemi_pcie_port *port) +{ + u32 cap_ctrl; + + cap_ctrl = pcie_read(port, MSI_CAP_CTRL_OFFSET); + + pcie_write(port, cap_ctrl | MSI_ENABLE_MULTI | + MSI_ENABLE, MSI_CAP_CTRL_OFFSET); + pcie_write(port, MICROSEMI_MSI_MSG_ADDR, MSI_MSG_ADDR_OFFSET); +} + +/* INTx Functions */ + +/** + * microsemi_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int microsemi_pcie_intx_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + + return 0; +} + +/* INTx IRQ Domain operations */ +static const struct irq_domain_ops intx_domain_ops = { + .map = microsemi_pcie_intx_map, + .xlate = pci_irqd_intx_xlate, +}; + +/* PCIe HW Functions */ + +/** + * microsemi_pcie_intr_handler - Interrupt Service Handler + * @irq: IRQ number + * @data: PCIe port information + * + * Return: IRQ_HANDLED on success and IRQ_NONE on failure + */ +static irqreturn_t microsemi_pcie_intr_handler(int irq, void *data) +{ + struct microsemi_pcie_port *port = (struct microsemi_pcie_port *)data; + struct device *dev = port->dev; + unsigned long status; + unsigned long msi; + u32 bit; + u32 virq; + + status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL); + + /* Might be sharing interrupt line. Check if interrupt is for us */ + if (!status) + return IRQ_NONE; + + status = (status & MICROSEMI_PCI_INTS) >> MICROSEMI_PM_MSI_INT_SHIFT; + for_each_set_bit(bit, &status, PCI_NUM_INTX) { + /* clear that interrupt bit */ + writel(1 << (bit + MICROSEMI_PM_MSI_INT_SHIFT), + port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL); + virq = irq_find_mapping(port->leg_domain, bit); + + if (virq) + generic_handle_irq(virq); + else + dev_err(dev, "unexpected IRQ, INT%d\n", bit); + } + + status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL); + if (status & MICROSEMI_MSI_INT) { + /* Clear the ISTATUS MSI bit */ + writel((1 << MICROSEMI_MSI_INT_SHIFT), + port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL); + msi = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_MSI); + for_each_set_bit(bit, &msi, MICROSEMI_NUM_MSI_IRQS) { + /* clear that MSI interrupt bit */ + writel((1 << bit), + port->bridge_base_addr + MICROSEMI_ISTATUS_MSI); + virq = irq_find_mapping(port->msi_domain, bit); + if (virq) + generic_handle_irq(virq); + else + dev_err(dev, "unexpected IRQ, INT%d\n", bit); + } + } + + return IRQ_HANDLED; +} + +/** + * microsemi_pcie_init_irq_domain - Initialize IRQ domain + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int microsemi_pcie_init_irq_domain(struct microsemi_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct device_node *pcie_intc_node; + + /* Setup INTx */ + pcie_intc_node = of_get_next_child(node, NULL); + if (!pcie_intc_node) { + dev_err(dev, "no PCIe INTx node found\n"); + return -ENODEV; + } + + port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX, + &intx_domain_ops, + port); + if (!port->leg_domain) { + dev_err(dev, "failed to get a INTx IRQ domain\n"); + return -ENODEV; + } + + /* Setup MSI */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + port->msi_domain = + irq_domain_add_linear(node, + MICROSEMI_NUM_MSI_IRQS, + &msi_domain_ops, + µsemi_pcie_msi_chip); + if (!port->msi_domain) { + dev_err(dev, "failed to get an MSI IRQ domain\n"); + return -ENODEV; + } + microsemi_pcie_enable_msi(port); + } + + /* Enable interrupts */ + writel(MICROSEMI_PCIE_ENABLE_MSI | MICROSEMI_PCIE_LOCAL_INT_ENABLE, + port->bridge_base_addr + MICROSEMI_IMASK_LOCAL); + + return 0; +} + +/** + * microsemi_pcie_init_port - Parse Device tree, Initialize hardware + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int microsemi_pcie_init_port(struct microsemi_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct of_pci_range_parser parser; + struct of_pci_range range; + struct resource regs; + struct resource regs1; + resource_size_t size; + u32 atr_sz; + const char *type; + int err; + u32 val; + int index = 1; + + type = of_get_property(node, "device_type", NULL); + if (!type || strcmp(type, "pci")) { + dev_err(dev, "invalid \"device_type\" %s\n", type); + return -EINVAL; + } + + /* Only supporting bridge 1 */ + port->bridge = 1; + + mutex_init(&port->lock); + + err = of_address_to_resource(node, 0, ®s); + if (err) { + dev_err(dev, "missing \"reg\" property\n"); + return err; + } + + port->pcie_base_addr = devm_pci_remap_cfg_resource(dev, ®s); + if (IS_ERR(port->pcie_base_addr)) + return PTR_ERR(port->pcie_base_addr); + + err = of_address_to_resource(node, 1, ®s1); + if (err) { + dev_err(dev, "missing \"reg\" property\n"); + return err; + } + + port->axi_base_addr = devm_ioremap_resource(dev, ®s1); + if (IS_ERR(port->axi_base_addr)) + return PTR_ERR(port->axi_base_addr); + + if (port->bridge == 0) { + port->bridge_base_addr = port->axi_base_addr + + MICROSEMI_PCIE0_BRIDGE_ADDR; + port->ctrl_base_addr = port->axi_base_addr + + MICROSEMI_PCIE0_CTRL_ADDR; + } else { + port->bridge_base_addr = port->axi_base_addr + + MICROSEMI_PCIE1_BRIDGE_ADDR; + port->ctrl_base_addr = port->axi_base_addr + + MICROSEMI_PCIE1_CTRL_ADDR; + } + + port->irq = irq_of_parse_and_map(node, 0); + + err = devm_request_irq(dev, port->irq, microsemi_pcie_intr_handler, + IRQF_SHARED | IRQF_NO_THREAD, + "microsemi-pcie", port); + if (err) { + dev_err(dev, "unable to request IRQ%d\n", port->irq); + return err; + } + + microsemi_pcie_enable(port); + + /* Clear and Disable interrupts */ + val = ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS + | ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS + | ECC_CONTROL_RX_RAM_ECC_BYPASS + | ECC_CONTROL_TX_RAM_ECC_BYPASS; + writel(val, port->ctrl_base_addr + MICROSEMI_ECC_CONTROL); + + val = PCIE_EVENT_INT_L2_EXIT_INT + | PCIE_EVENT_INT_HOTRST_EXIT_INT + | PCIE_EVENT_INT_DLUP_EXIT_INT + | PCIE_EVENT_INT_L2_EXIT_INT_MASK + | PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK + | PCIE_EVENT_INT_DLUP_EXIT_INT_MASK; + writel(val, port->ctrl_base_addr + MICROSEMI_PCIE_EVENT_INT); + + val = SEC_ERROR_INT_TX_RAM_SEC_ERR_INT + | SEC_ERROR_INT_RX_RAM_SEC_ERR_INT + | SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT + | SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT; + writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT); + writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT_MASK); + + val = DED_ERROR_INT_TX_RAM_DED_ERR_INT + | DED_ERROR_INT_RX_RAM_DED_ERR_INT + | DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT + | DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT; + writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT); + writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT_MASK); + + writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_LOCAL); + writel(GENMASK(31, 0), + port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL); + writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_HOST); + writel(GENMASK(31, 0), port->bridge_base_addr + MICROSEMI_ISTATUS_HOST); + + /* Configure Address Translation Table 0 for PCIe config space */ + writel(MICROSEMI_PCIE_CONFIG_INTERFACE, + port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM); + + size = resource_size(®s); + + atr_sz = find_first_bit((const unsigned long *)&size, 64) - 1; + + writel(lower_32_bits(regs.start) + | atr_sz << ATR_SIZE_SHIFT | ATR_IMPL_ENABLE, + port->bridge_base_addr + + MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM); + + writel(lower_32_bits(regs.start), + port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB); + + if (of_pci_range_parser_init(&parser, node)) { + dev_err(dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + for_each_of_pci_range(&parser, &range) { + switch (range.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_MEM: + size = range.size; + atr_sz = + find_first_bit((const unsigned long *)&size, 64) + - 1; + + /* Configure Address Translation Table index for PCIe + * mem space + */ + writel(MICROSEMI_PCIE_TX_RX_INTERFACE, + port->bridge_base_addr + + (index * MICROSEMI_ATR0_AXI4_SLV_SIZE) + + MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM); + + writel(lower_32_bits(range.cpu_addr) + | (atr_sz << ATR_SIZE_SHIFT) + | ATR_IMPL_ENABLE, + port->bridge_base_addr + + (index * MICROSEMI_ATR0_AXI4_SLV_SIZE) + + MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM); + + writel(lower_32_bits(range.pci_addr), + port->bridge_base_addr + + (index * MICROSEMI_ATR0_AXI4_SLV_SIZE) + + MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB); + + break; + } + index++; + } + + writel(readl(port->bridge_base_addr + + MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12) + | (MICROSEMI_ATR0_PCIE_WIN0_SIZE + << MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT), + port->bridge_base_addr + + MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12); + + writel(0x0, + port->bridge_base_addr + MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32); + + writel((readl(port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1) + & 0xffff) + | (PCI_CLASS_BRIDGE_PCI << 16), + port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1); + + return 0; +} + +/** + * microsemi_pcie_probe - Probe function + * @pdev: Platform device pointer + * + * Return: '0' on success and error value on failure + */ +static int microsemi_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct microsemi_pcie_port *port; + struct pci_bus *bus, *child; + struct pci_host_bridge *bridge; + int err; + resource_size_t iobase = 0; + LIST_HEAD(res); + + if (!dev->of_node) + return -ENODEV; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port)); + if (!bridge) + return -ENODEV; + + port = pci_host_bridge_priv(bridge); + + port->dev = dev; + port->pdev = pdev; + + err = microsemi_pcie_init_port(port); + if (err) { + dev_err(dev, "PCIe port initialization failed\n"); + return err; + } + + err = microsemi_pcie_init_irq_domain(port); + if (err) { + dev_err(dev, "failed creating IRQ domain\n"); + return err; + } + + err = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res, + &iobase); + if (err) { + dev_err(dev, "getting bridge resources failed\n"); + return err; + } + + err = devm_request_pci_bus_resources(dev, &res); + if (err) + goto error; + + list_splice_init(&res, &bridge->windows); + bridge->dev.parent = dev; + bridge->sysdata = port; + bridge->busnr = 0; + bridge->ops = µsemi_pcie_ops; + bridge->map_irq = of_irq_parse_and_map_pci; + bridge->swizzle_irq = pci_common_swizzle; + +#ifdef CONFIG_PCI_MSI + microsemi_pcie_msi_chip.dev = dev; + bridge->msi = µsemi_pcie_msi_chip; +#endif + err = pci_scan_root_bus_bridge(bridge); + if (err < 0) + goto error; + + bus = bridge->bus; + + pci_assign_unassigned_bus_resources(bus); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + pci_bus_add_devices(bus); + + return 0; + +error: + pci_free_resource_list(&res); + return err; +} + +static const struct of_device_id microsemi_pcie_of_match[] = { + { .compatible = "microsemi,ms-pf-axi-pcie-host", }, + {} +}; + +static struct platform_driver microsemi_pcie_driver = { + .driver = { + .name = "microsemi-pcie", + .of_match_table = microsemi_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = microsemi_pcie_probe, +}; +builtin_platform_driver(microsemi_pcie_driver); -- 2.17.1