[10/15] ARM: dts: imx6q-mccmon6: Use explicit swpad values

Message ID 20190211141333.28725-10-u.kleine-koenig@pengutronix.de
State New
Headers show
Series
  • [01/15] ARM: dts: imx6qdl-fdi-fs700-m60: Use explicit swpad values
Related show

Commit Message

Uwe Kleine-König Feb. 11, 2019, 2:13 p.m.
Instead of relying on reset defaults or a bootloader to configure
use explicit values for the swpad configuration. Here the reset
defaults are used owing to lack of other evidence.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-mccmon6.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index 74d9824e920b..b0fcf3e9ee50 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -314,13 +314,13 @@ 
 
 	pinctrl_ecspi3_cs: ecspi3csgrp {
 		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 	0x1b0b0
 		>;
 	};
 
 	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
 		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 	0x1b0b0
 		>;
 	};