[PATCHv3,1/7] support/download: reintroduce 'source-check' target

Message ID 20190209202350.4984-1-patrickdepinguin@gmail.com
State Superseded
Headers show
Series
  • [PATCHv3,1/7] support/download: reintroduce 'source-check' target
Related show

Commit Message

Thomas De Schampheleire Feb. 9, 2019, 8:23 p.m.
From: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>

Commit bf28a165d992681a85b43a886005e669b3cb579b removed the source-check
target to allow easier refactoring of the download infrastructure.
It was partly based on the fact that no-one really used this target.

However, it turns out that there _are_ good uses for it. In a work
environment where many people are submitting changes to a Buildroot
repository, one cannot always blindly trust every change. A typical case
of human error is when bumping the version of a package but forgetting to
upload the tarball to the internal BR2_PRIMARY_SITE or (in case of a
repository) pushing the new changesets to the repository.
If a user cannot directly push to the Buildroot repository but needs to
queue their change via an automatic validation system, that validation
system can use 'make source-check' on the relevant defconfigs to protect
against such errors. A full download would also be possible but takes
longer and unnecessarily uses internal network bandwidth.

With that use case in mind, this commit reintroduces the 'source-check'
target, but embedded in the current situation with a dl-wrapper.  The
changes to the wrapper are minimal (not considering additional indentation).
A new option '-C' means 'check only' and will be passed to the download
backends. If the backend supports the option, no download will happen. If it
does not, then the backend will actually perform a download as a means of
checking that the source exists (a form of graceful degradation). In neither
case, though, hash checking is performed (as the standard case is without
download thus without file to calculate hashes on).

Subsequent commits will actually implement -C in the backends.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
---
 Makefile                    |   7 +++
 package/pkg-download.mk     |   6 +++
 package/pkg-generic.mk      |  14 ++++-
 support/download/dl-wrapper | 100 ++++++++++++++++++++----------------
 4 files changed, 82 insertions(+), 45 deletions(-)

v3: (feedback Arnout Vandecappelle)
- remove tmpd at the end of dl-wrapper
- remove duplication between DOWNLOAD and SOURCE_CHECK macros

v2:
- add a trailing dot on all usage texts like for other options
- split off the reintroduction of BR2_SSH to a separate patch
- fix the source-check for scp: it seems there were some broken things in v1
- drop incomplete implementations for git/svn/bzr/cvs so it falls back
to actual download.

Patch

diff --git a/Makefile b/Makefile
index 0d2659c46e..9ae047bfc6 100644
--- a/Makefile
+++ b/Makefile
@@ -131,6 +131,7 @@  noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconf
 # (default target is to build), or when MAKECMDGOALS contains
 # something else than one of the nobuild_targets.
 nobuild_targets := source %-source \
+	source-check %-source-check %-all-source-check \
 	legal-info %-legal-info external-deps _external-deps \
 	clean distclean help show-targets graph-depends \
 	%-graph-depends %-show-depends %-show-version \
@@ -818,6 +819,9 @@  target-post-image: $(TARGETS_ROOTFS) target-finalize staging-finalize
 .PHONY: source
 source: $(foreach p,$(PACKAGES),$(p)-all-source)
 
+.PHONY: source-check
+source-check: $(foreach p,$(PACKAGES),$(p)-all-source-check)
+
 .PHONY: _external-deps external-deps
 _external-deps: $(foreach p,$(PACKAGES),$(p)-all-external-deps)
 external-deps:
@@ -1103,6 +1107,8 @@  help:
 	@echo '  <pkg>-dirclean         - Remove <pkg> build directory'
 	@echo '  <pkg>-reconfigure      - Restart the build from the configure step'
 	@echo '  <pkg>-rebuild          - Restart the build from the build step'
+	@echo '  <pkg>-source-check     - Check package for valid download URLs'
+	@echo '  <pkg>-all-source-check - Check package and its dependencies for valid download URLs'
 	$(foreach p,$(HELP_PACKAGES), \
 		@echo $(sep) \
 		@echo '$($(p)_NAME):' $(sep) \
@@ -1122,6 +1128,7 @@  help:
 	@echo
 	@echo 'Miscellaneous:'
 	@echo '  source                 - download all sources needed for offline-build'
+	@echo '  source-check           - check selected packages for valid download URLs'
 	@echo '  external-deps          - list external packages used'
 	@echo '  legal-info             - generate info about license compliance'
 	@echo '  printvars              - dump all the internal variables'
diff --git a/package/pkg-download.mk b/package/pkg-download.mk
index 7cd87c38ff..5384fc2af4 100644
--- a/package/pkg-download.mk
+++ b/package/pkg-download.mk
@@ -70,6 +70,7 @@  export BR_NO_CHECK_HASH_FOR =
 # 3) BR2_BACKUP_SITE if enabled, unless BR2_PRIMARY_SITE_ONLY is set
 #
 # Argument 1 is the source location
+# Argument 2 (optionally) provides extra arguments to pass to DL_WRAPPER
 #
 ################################################################################
 
@@ -92,6 +93,7 @@  endif
 define DOWNLOAD
 	$(Q)mkdir -p $($(PKG)_DL_DIR)
 	$(Q)$(EXTRA_ENV) $(FLOCK) $(DL_WRAPPER) \
+		$(2) \
 		-c '$($(PKG)_DL_VERSION)' \
 		-d '$($(PKG)_DL_DIR)' \
 		-D '$(DL_DIR)' \
@@ -106,3 +108,7 @@  define DOWNLOAD
 		-- \
 		$($(PKG)_DL_OPTS)
 endef
+
+define SOURCE_CHECK
+	$(call DOWNLOAD,$(1),-C)
+endef
diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
index 6168b40e89..bc57956867 100644
--- a/package/pkg-generic.mk
+++ b/package/pkg-generic.mk
@@ -788,6 +788,10 @@  $(1)-legal-source:	$$($(2)_TARGET_ACTUAL_SOURCE)
 endif # actual sources != sources
 endif # actual sources != ""
 
+$(1)-source-check: PKG=$(2)
+$(1)-source-check:
+	$$(foreach p,$$($(2)_ALL_DOWNLOADS),$$(call SOURCE_CHECK,$$(p))$$(sep))
+
 $(1)-external-deps:
 	@for p in $$($(2)_SOURCE) $$($(2)_PATCH) $$($(2)_EXTRA_DOWNLOADS) ; do \
 		echo `basename $$$$p` ; \
@@ -812,6 +816,9 @@  $(1)-rsync:		$$($(2)_TARGET_RSYNC)
 $(1)-source:
 $(1)-legal-source:
 
+$(1)-source-check:
+	test -d $$($(2)_OVERRIDE_SRCDIR)
+
 $(1)-external-deps:
 	@echo "file://$$($(2)_OVERRIDE_SRCDIR)"
 endif
@@ -846,6 +853,9 @@  $(1)-graph-rdepends: graph-depends-requirements
 $(1)-all-source:	$(1)-source
 $(1)-all-source:	$$(foreach p,$$($(2)_FINAL_ALL_DEPENDENCIES),$$(p)-all-source)
 
+$(1)-all-source-check:	$(1)-source-check
+$(1)-all-source-check:	$$(foreach p,$$($(2)_FINAL_ALL_DEPENDENCIES),$$(p)-all-source-check)
+
 $(1)-all-external-deps:	$(1)-external-deps
 $(1)-all-external-deps:	$$(foreach p,$$($(2)_FINAL_ALL_DEPENDENCIES),$$(p)-all-external-deps)
 
@@ -1044,6 +1054,7 @@  DL_TOOLS_DEPENDENCIES += $$(call extractor-dependency,$$($(2)_SOURCE))
 	$(1)-all-external-deps \
 	$(1)-all-legal-info \
 	$(1)-all-source \
+	$(1)-all-source-check \
 	$(1)-build \
 	$(1)-clean-for-rebuild \
 	$(1)-clean-for-reconfigure \
@@ -1068,7 +1079,8 @@  DL_TOOLS_DEPENDENCIES += $$(call extractor-dependency,$$($(2)_SOURCE))
 	$(1)-rsync \
 	$(1)-show-depends \
 	$(1)-show-version \
-	$(1)-source
+	$(1)-source \
+	$(1)-source-check
 
 ifneq ($$($(2)_SOURCE),)
 ifeq ($$($(2)_SITE),)
diff --git a/support/download/dl-wrapper b/support/download/dl-wrapper
index 3315bd410e..920699e51d 100755
--- a/support/download/dl-wrapper
+++ b/support/download/dl-wrapper
@@ -17,7 +17,7 @@ 
 # We want to catch any unexpected failure, and exit immediately.
 set -e
 
-export BR_BACKEND_DL_GETOPTS=":hc:d:o:n:N:H:ru:qf:e"
+export BR_BACKEND_DL_GETOPTS=":hc:Cd:o:n:N:H:ru:qf:e"
 
 main() {
     local OPT OPTARG
@@ -25,9 +25,10 @@  main() {
     local -a uris
 
     # Parse our options; anything after '--' is for the backend
-    while getopts ":c:d:D:o:n:N:H:rf:u:q" OPT; do
+    while getopts ":c:Cd:D:o:n:N:H:rf:u:q" OPT; do
         case "${OPT}" in
         c)  cset="${OPTARG}";;
+        C)  checkonly=-C;;
         d)  dl_dir="${OPTARG}";;
         D)  old_dl_dir="${OPTARG}";;
         o)  output="${OPTARG}";;
@@ -46,38 +47,40 @@  main() {
     # Forget our options, and keep only those for the backend
     shift $((OPTIND-1))
 
-    if [ -z "${output}" ]; then
-        error "no output specified, use -o\n"
-    fi
+    if [ -z "${checkonly}" ]; then
+        if [ -z "${output}" ]; then
+            error "no output specified, use -o\n"
+        fi
 
-    # Legacy handling: check if the file already exists in the global
-    # download directory. If it does, hard-link it. If it turns out it
-    # was an incorrect download, we'd still check it below anyway.
-    # If we can neither link nor copy, fallback to doing a download.
-    # NOTE! This is not atomic, is subject to TOCTTOU, but the whole
-    # dl-wrapper runs under an flock, so we're safe.
-    if [ ! -e "${output}" -a -e "${old_dl_dir}/${filename}" ]; then
-        ln "${old_dl_dir}/${filename}" "${output}" || \
-        cp "${old_dl_dir}/${filename}" "${output}" || \
-        true
-    fi
+        # Legacy handling: check if the file already exists in the global
+        # download directory. If it does, hard-link it. If it turns out it
+        # was an incorrect download, we'd still check it below anyway.
+        # If we can neither link nor copy, fallback to doing a download.
+        # NOTE! This is not atomic, is subject to TOCTTOU, but the whole
+        # dl-wrapper runs under an flock, so we're safe.
+        if [ ! -e "${output}" -a -e "${old_dl_dir}/${filename}" ]; then
+            ln "${old_dl_dir}/${filename}" "${output}" || \
+            cp "${old_dl_dir}/${filename}" "${output}" || \
+            true
+        fi
 
-    # If the output file already exists and:
-    # - there's no .hash file: do not download it again and exit promptly
-    # - matches all its hashes: do not download it again and exit promptly
-    # - fails at least one of its hashes: force a re-download
-    # - there's no hash (but a .hash file): consider it a hard error
-    if [ -e "${output}" ]; then
-        if support/download/check-hash ${quiet} "${hfile}" "${output}" "${output##*/}"; then
-            exit 0
-        elif [ ${?} -ne 2 ]; then
-            # Do not remove the file, otherwise it might get re-downloaded
-            # from a later location (i.e. primary -> upstream -> mirror).
-            # Do not print a message, check-hash already did.
-            exit 1
+        # If the output file already exists and:
+        # - there's no .hash file: do not download it again and exit promptly
+        # - matches all its hashes: do not download it again and exit promptly
+        # - fails at least one of its hashes: force a re-download
+        # - there's no hash (but a .hash file): consider it a hard error
+        if [ -e "${output}" ]; then
+            if support/download/check-hash ${quiet} "${hfile}" "${output}" "${output##*/}"; then
+                exit 0
+            elif [ ${?} -ne 2 ]; then
+                # Do not remove the file, otherwise it might get re-downloaded
+                # from a later location (i.e. primary -> upstream -> mirror).
+                # Do not print a message, check-hash already did.
+                exit 1
+            fi
+            rm -f "${output}"
+            warn "Re-downloading '%s'...\n" "${output##*/}"
         fi
-        rm -f "${output}"
-        warn "Re-downloading '%s'...\n" "${output##*/}"
     fi
 
     # Look through all the uris that we were given to download the package
@@ -127,7 +130,7 @@  main() {
                 -f "${filename}" \
                 -u "${uri}" \
                 -o "${tmpf}" \
-                ${quiet} ${recurse} -- "${@}"
+                ${quiet} ${recurse} ${checkonly} -- "${@}"
         then
             # cd back to keep path coherence
             cd "${OLDPWD}"
@@ -138,19 +141,21 @@  main() {
         # cd back to free the temp-dir, so we can remove it later
         cd "${OLDPWD}"
 
-        # Check if the downloaded file is sane, and matches the stored hashes
-        # for that file
-        if support/download/check-hash ${quiet} "${hfile}" "${tmpf}" "${output##*/}"; then
-            rc=0
-        else
-            if [ ${?} -ne 3 ]; then
-                rm -rf "${tmpd}"
-                continue
+        if [ -z "${checkonly}" ]; then
+            # Check if the downloaded file is sane, and matches the stored hashes
+            # for that file
+            if support/download/check-hash ${quiet} "${hfile}" "${tmpf}" "${output##*/}"; then
+                rc=0
+            else
+                if [ ${?} -ne 3 ]; then
+                    rm -rf "${tmpd}"
+                    continue
+                fi
+
+                # the hash file exists and there was no hash to check the file
+                # against
+                rc=1
             fi
-
-            # the hash file exists and there was no hash to check the file
-            # against
-            rc=1
         fi
         download_and_check=1
         break
@@ -163,6 +168,13 @@  main() {
         exit 1
     fi
 
+    # If we only need to check the presence of sources, stop here.
+    # No need to handle output files.
+    if [ -n "${checkonly}" ]; then
+        rm -rf "${tmpd}"
+        exit 0
+    fi
+
     # tmp_output is in the same directory as the final output, so we can
     # later move it atomically.
     tmp_output="$(mktemp "${output}.XXXXXX")"