[GIT,PULL] ARM: mvebu: dt for v5.1 (#1)

Message ID 87k1ia561h.fsf@FE-laptop
State New
Headers show
Series
  • [GIT,PULL] ARM: mvebu: dt for v5.1 (#1)
Related show

Pull-request

git://git.infradead.org/linux-mvebu.git tags/mvebu-dt-5.1-1

Message

Gregory CLEMENT Feb. 8, 2019, 9:22 p.m.
Hi,

Here is the first pull request for dt for mvebu for v5.1.

Gregory

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  git://git.infradead.org/linux-mvebu.git tags/mvebu-dt-5.1-1

for you to fetch changes up to cb92e40411ef8a773675b522d29b6ea82e5fb8e0:

  arch: arm: dts: Remove disabled marvell,dsa properties (2019-02-08 18:22:55 +0100)

----------------------------------------------------------------
mvebu dt for 5.1 (part 1)

 - Cleanup marvell,dsa properties

----------------------------------------------------------------
Andrew Lunn (1):
      arch: arm: dts: Remove disabled marvell,dsa properties

 arch/arm/boot/dts/armada-370-rd.dts            | 42 -------------------
 arch/arm/boot/dts/armada-388-clearfog.dts      | 58 --------------------------
 arch/arm/boot/dts/armada-xp-linksys-mamba.dts  | 47 ---------------------
 arch/arm/boot/dts/kirkwood-dir665.dts          | 47 ---------------------
 arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 47 ---------------------
 arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 47 ---------------------
 arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 41 ------------------
 7 files changed, 329 deletions(-)

Comments

Arnd Bergmann Feb. 15, 2019, 3:01 p.m. | #1
On Fri, Feb 8, 2019 at 10:22 PM Gregory CLEMENT
<gregory.clement@bootlin.com> wrote:
> mvebu dt for 5.1 (part 1)
>
>  - Cleanup marvell,dsa properties

Pulled into arm/dt, thanks!

      Arnd
Arnd Bergmann Feb. 15, 2019, 3:44 p.m. | #2
On Fri, Feb 8, 2019 at 10:22 PM Gregory CLEMENT
<gregory.clement@bootlin.com> wrote:

>
> ----------------------------------------------------------------
> Andrew Lunn (1):
>       arch: arm: dts: Remove disabled marvell,dsa properties
>
>  arch/arm/boot/dts/armada-370-rd.dts            | 42 -------------------
>  arch/arm/boot/dts/armada-388-clearfog.dts      | 58 --------------------------
>  arch/arm/boot/dts/armada-xp-linksys-mamba.dts  | 47 ---------------------
>  arch/arm/boot/dts/kirkwood-dir665.dts          | 47 ---------------------
>  arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 47 ---------------------
>  arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 47 ---------------------
>  arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 41 ------------------
>  7 files changed, 329 deletions(-)

Could you have a look at these warnings and send a follow-up pull request?

../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:21.4-16: Warning
(reg_format): /dsa/switch@0:reg: property has invalid length (8 bytes)
(#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:23.5-15: Warning
(reg_format): /dsa/switch@0/port@4:reg: property has invalid length (4
bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (i2c_bus_reg):
Failed prerequisite 'reg_format'
arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (spi_bus_reg):
Failed prerequisite 'reg_format'
../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:20.12-26.5: Warning
(avoid_default_addr_size): /dsa/switch@0: Relying on default
#address-cells value
../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:20.12-26.5: Warning
(avoid_default_addr_size): /dsa/switch@0: Relying on default
#size-cells value
../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:22.11-25.6: Warning
(avoid_default_addr_size): /dsa/switch@0/port@4: Relying on default
#address-cells value
../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:22.11-25.6: Warning
(avoid_default_addr_size): /dsa/switch@0/port@4: Relying on default
#size-cells value

Thanks,

      Arnd
Gregory CLEMENT Feb. 19, 2019, 4:21 p.m. | #3
Hi Arnd,
 
 On ven., févr. 15 2019, Arnd Bergmann <arnd@arndb.de> wrote:

> On Fri, Feb 8, 2019 at 10:22 PM Gregory CLEMENT
> <gregory.clement@bootlin.com> wrote:
>
>>
>> ----------------------------------------------------------------
>> Andrew Lunn (1):
>>       arch: arm: dts: Remove disabled marvell,dsa properties
>>
>>  arch/arm/boot/dts/armada-370-rd.dts            | 42 -------------------
>>  arch/arm/boot/dts/armada-388-clearfog.dts      | 58 --------------------------
>>  arch/arm/boot/dts/armada-xp-linksys-mamba.dts  | 47 ---------------------
>>  arch/arm/boot/dts/kirkwood-dir665.dts          | 47 ---------------------
>>  arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 47 ---------------------
>>  arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 47 ---------------------
>>  arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 41 ------------------
>>  7 files changed, 329 deletions(-)
>
> Could you have a look at these warnings and send a follow-up pull request?
>
> ../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:21.4-16: Warning
> (reg_format): /dsa/switch@0:reg: property has invalid length (8 bytes)
> (#address-cells == 2, #size-cells == 1)
> ../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:23.5-15: Warning
> (reg_format): /dsa/switch@0/port@4:reg: property has invalid length (4
> bytes) (#address-cells == 2, #size-cells == 1)
> arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning
> (pci_device_bus_num): Failed prerequisite 'reg_format'
> arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (i2c_bus_reg):
> Failed prerequisite 'reg_format'
> arch/arm/boot/dts/kirkwood-rd88f6281-z0.dtb: Warning (spi_bus_reg):
> Failed prerequisite 'reg_format'
> ../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:20.12-26.5: Warning
> (avoid_default_addr_size): /dsa/switch@0: Relying on default
> #address-cells value
> ../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:20.12-26.5: Warning
> (avoid_default_addr_size): /dsa/switch@0: Relying on default
> #size-cells value
> ../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:22.11-25.6: Warning
> (avoid_default_addr_size): /dsa/switch@0/port@4: Relying on default
> #address-cells value
> ../arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts:22.11-25.6: Warning
> (avoid_default_addr_size): /dsa/switch@0/port@4: Relying on default
> #size-cells value
>

Yes sure. I realize that I test the build with the wrong defconfig
(mvebu_v7_defconfig instead of mvebu_v5_defconfig) which made me miss
these warnings. I am going to send a patch to fix it and then I will do a
follow-up pull request.

Gregory


> Thanks,
>
>       Arnd