diff mbox series

[U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT

Message ID	20190208174229.23562-15-marcel@ziswiler.com
State	Accepted
Commit	2910c0a135ecc0dcaae02503cda949376e767f8e
Delegated to:	Stefano Babic
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Marcel Ziswiler <marcel@ziswiler.com> To: u-boot@lists.denx.de Date: Fri, 8 Feb 2019 18:42:17 +0100 Message-Id: <20190208174229.23562-15-marcel@ziswiler.com> In-Reply-To: <20190208174229.23562-1-marcel@ziswiler.com> References: <20190208174229.23562-1-marcel@ziswiler.com> MIME-Version: 1.0 Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Max Krummenacher <max.krummenacher@toradex.com> Subject: [U-Boot] [PATCH v1 14/26] colibri_imx6: print also 64-bit IT Precedence: list Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	colibri imx6 fixes, device tree enablement and driver model conversion \| expand [U-Boot,v1,00/26] colibri imx6 fixes, device tree enablement and driver model conversion [U-Boot,v1,01/26] colibri_imx6: get rid of obsolete nospl configurations [U-Boot,v1,02/26] colibri_imx6: use distro defaults [U-Boot,v1,03/26] colibri_imx6: move console in env from header file to defconfig [U-Boot,v1,04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support [U-Boot,v1,05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration [U-Boot,v1,06/26] colibri_imx6: migrate to using device tree [U-Boot,v1,07/26] colibri_imx6: clean-up and migrate gpios to using driver model [U-Boot,v1,08/26] colibri_imx6: enable pin control driver [U-Boot,v1,09/26] colibri_imx6: migrate i2c to using driver model [U-Boot,v1,10/26] colibri_imx6: migrate pmic and regulator to using driver model [U-Boot,v1,11/26] colibri_imx6: migrate mmc to using driver model [U-Boot,v1,12/26] colibri_imx6: migrate usb to using driver model [U-Boot,v1,13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP [U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT [U-Boot,v1,15/26] colibri_imx6: add distroboot support [U-Boot,v1,16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings [U-Boot,v1,17/26] colibri imx6: pf0100: reorder and cleanup message printing [U-Boot,v1,18/26] colibri imx6: disable ri and dcd irq in uarts [U-Boot,v1,19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements [U-Boot,v1,20/26] colibri_imx6: revert fuse value set in mfgr_fuse [U-Boot,v1,21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree [U-Boot,v1,22/26] configs: colibri_imx6: Use ext4 file system by default [U-Boot,v1,23/26] colibri_imx6: use SDP if USB serial downloader has been used [U-Boot,v1,24/26] colibri_imx6: switch to zimage [U-Boot,v1,25/26] colibri_imx6: added nreset gpio on reboot [U-Boot,v1,26/26] board: colibri_imx6: check for and report ecc errors in fuses

Commit Message

Marcel Ziswiler Feb. 8, 2019, 5:42 p.m. UTC

From: Max Krummenacher <max.krummenacher@toradex.com>

Print also for Colibri iMX6 512MB IT with 64-bit RAM bus.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_imx6/colibri_imx6.c | 1 +
 1 file changed, 1 insertion(+)

diff mbox series

Patch

diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 83ecd20b3d..439d38bc29 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -1019,6 +1019,7 @@  static void spl_dram_init(void)
 	case TEMP_AUTOMOTIVE:
 	default:
 		if (is_cpu_type(MXC_CPU_MX6DL)) {
+			puts("Industrial temperature grade DDR3 timings, 64bit bus width.\n");
 			ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
 		} else {
 			puts("Industrial temperature grade DDR3 timings, 32bit bus width.\n");