diff mbox series

[v2,01/11] pinctrl: qcom: ssbi-gpio: hardcode IRQ counts

Message ID 20190208021631.30252-2-masneyb@onstation.org
State New
Headers show
Series qcom: ssbi-gpio: add support for hierarchical IRQ chip | expand

Commit Message

Brian Masney Feb. 8, 2019, 2:16 a.m. UTC 
The probing of this driver calls platform_irq_count, which will
setup all of the IRQs that are configured in device tree. In
preparation for converting this driver to be a hierarchical IRQ
chip, hardcode the IRQ count based on the hardware type so that all
the IRQs are not configured immediately and are configured on an
as-needed basis later in the boot process. This change will also
allow for the removal of the interrupts property later in this
patch series once the hierarchical IRQ chip support is in.

This patch also removes the generic qcom,ssbi-gpio OF match since we
don't know the number of pins. All of the existing upstream bindings
already include the more-specific binding.

This change was tested on an APQ8060 DragonBoard.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes since v1:
- Added pctrl->dev back that was mistakenly removed
- Removed npins local variable from _probe(); populate pctrl->npins
  directly.

 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index ded7d765af2e..23641e4d4521 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -665,12 +665,11 @@  static int pm8xxx_pin_populate(struct pm8xxx_gpio *pctrl,
 }
 
 static const struct of_device_id pm8xxx_gpio_of_match[] = {
-	{ .compatible = "qcom,pm8018-gpio" },
-	{ .compatible = "qcom,pm8038-gpio" },
-	{ .compatible = "qcom,pm8058-gpio" },
-	{ .compatible = "qcom,pm8917-gpio" },
-	{ .compatible = "qcom,pm8921-gpio" },
-	{ .compatible = "qcom,ssbi-gpio" },
+	{ .compatible = "qcom,pm8018-gpio", .data = (void *) 6 },
+	{ .compatible = "qcom,pm8038-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm8058-gpio", .data = (void *) 44 },
+	{ .compatible = "qcom,pm8917-gpio", .data = (void *) 38 },
+	{ .compatible = "qcom,pm8921-gpio", .data = (void *) 44 },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_gpio_of_match);
@@ -680,20 +679,14 @@  static int pm8xxx_gpio_probe(struct platform_device *pdev)
 	struct pm8xxx_pin_data *pin_data;
 	struct pinctrl_pin_desc *pins;
 	struct pm8xxx_gpio *pctrl;
-	int ret;
-	int i, npins;
+	int ret, i;
 
 	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
 	if (!pctrl)
 		return -ENOMEM;
 
 	pctrl->dev = &pdev->dev;
-	npins = platform_irq_count(pdev);
-	if (!npins)
-		return -EINVAL;
-	if (npins < 0)
-		return npins;
-	pctrl->npins = npins;
+	pctrl->npins = (uintptr_t) device_get_match_data(&pdev->dev);
 
 	pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!pctrl->regmap) {