[v2,2/5] gpio: rename gpio_set_drive_single_ended() to gpio_set_config()

Message ID 20190207162859.26252-3-thomas.petazzoni@bootlin.com
State New
Headers show
Series
  • gpio: add support for pull-up/pull-down configuration
Related show

Commit Message

Thomas Petazzoni Feb. 7, 2019, 4:28 p.m.
This commit simply renames gpio_set_drive_single_ended() to
gpio_set_config(), as the function is not specific to setting the GPIO
drive type, and will be used for other purposes in followup commits.

In addition, it moves the function above gpiod_direction_input(), as
it will be used from gpiod_direction_input().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
 drivers/gpio/gpiolib.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

Patch

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 361a09c8138a..cf8a4402fef1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2555,6 +2555,14 @@  EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
  * rely on gpio_request() having been called beforehand.
  */
 
+static int gpio_set_config(struct gpio_chip *gc, unsigned offset,
+			   enum pin_config_param mode)
+{
+	unsigned long config = { PIN_CONF_PACKED(mode, 0) };
+
+	return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
+}
+
 /**
  * gpiod_direction_input - set the GPIO direction to input
  * @desc:	GPIO to set to input
@@ -2608,14 +2616,6 @@  int gpiod_direction_input(struct gpio_desc *desc)
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_input);
 
-static int gpio_set_drive_single_ended(struct gpio_chip *gc, unsigned offset,
-				       enum pin_config_param mode)
-{
-	unsigned long config = { PIN_CONF_PACKED(mode, 0) };
-
-	return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
-}
-
 static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
@@ -2712,8 +2712,8 @@  int gpiod_direction_output(struct gpio_desc *desc, int value)
 	gc = desc->gdev->chip;
 	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		/* First see if we can enable open drain in hardware */
-		ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
-						  PIN_CONFIG_DRIVE_OPEN_DRAIN);
+		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
+				      PIN_CONFIG_DRIVE_OPEN_DRAIN);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open drain by not actively driving the line high */
@@ -2721,16 +2721,16 @@  int gpiod_direction_output(struct gpio_desc *desc, int value)
 			return gpiod_direction_input(desc);
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
-		ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
-						  PIN_CONFIG_DRIVE_OPEN_SOURCE);
+		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
+				      PIN_CONFIG_DRIVE_OPEN_SOURCE);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open source by not actively driving the line low */
 		if (!value)
 			return gpiod_direction_input(desc);
 	} else {
-		gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
-					    PIN_CONFIG_DRIVE_PUSH_PULL);
+		gpio_set_config(gc, gpio_chip_hwgpio(desc),
+				PIN_CONFIG_DRIVE_PUSH_PULL);
 	}
 
 set_output_value: