diff mbox series

[V13,4/5] i2c: tegra: update transfer timeout

Message ID 1549464441-1836-4-git-send-email-skomatineni@nvidia.com
State Changes Requested
Headers show
Series [V13,1/5] i2c: tegra: sort all the include headers alphabetically | expand

Commit Message

Sowjanya Komatineni Feb. 6, 2019, 2:47 p.m. UTC 
Tegra194 allows max of 64K bytes and Tegra186 and prior allows
max of 4K bytes of transfer per packet.

one sec timeout is not enough for transfers more than 10K bytes
at STD bus rate.

This patch updates I2C transfer timeout based on the transfer size
and I2C bus rate to allow enough time during max transfer size at
lower bus speed.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10/V11/V12/V13] : Reduced the timeout for bus clear operation
	Added adapter timeout to cover worst case transfer rate (max transfer
	size at STD speed) incase if ARB LOST happens during middle/end of 
	the transaction.
 [V9] : Rebased to 5.0-rc4
	Minor updates for readability of xfer time
 [V8] : Added comment with explaination of xfer time calculation
 [V5/V6/V7] : Same as V4
 [V4] : V4 series includes bus clear support and this patch is updated with
	fixed timeout of 1sec for bus clear operation.
 [V3] : Same as V2
 [V2] : Added this patch in V2 series to allow enough time for data transfer
	to happen.
	This patch has dependency with DMA patch as TEGRA_I2C_TIMEOUT define
	takes argument with this patch.


 drivers/i2c/busses/i2c-tegra.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 47b1d08f7a08..f38ebc61fc26 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -24,7 +24,6 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
-#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
 #define BYTES_PER_FIFO_WORD 4
 
 #define I2C_CNFG				0x000
@@ -938,8 +937,9 @@  static int tegra_i2c_issue_bus_clear(struct tegra_i2c_dev *i2c_dev)
 		i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
 		tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
 
-		time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
-							TEGRA_I2C_TIMEOUT);
+		time_left = wait_for_completion_timeout(
+						&i2c_dev->msg_complete,
+						msecs_to_jiffies(50));
 		if (time_left == 0) {
 			dev_err(i2c_dev->dev, "timed out for bus clear\n");
 			return -ETIMEDOUT;
@@ -966,6 +966,7 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	u32 *buffer = NULL;
 	int err = 0;
 	bool dma;
+	u16 xfer_time = 100;
 
 	tegra_i2c_flush_fifos(i2c_dev);
 
@@ -986,6 +987,13 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
 	dma = i2c_dev->is_curr_dma_xfer;
 
+	/*
+	 * Transfer time in mSec = Total bits / transfer rate
+	 * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
+	 */
+	xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
+					i2c_dev->bus_clk_rate);
+
 	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
 
 	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
@@ -1089,7 +1097,7 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
 		time_left = wait_for_completion_timeout(
 						&i2c_dev->dma_complete,
-						TEGRA_I2C_TIMEOUT);
+						msecs_to_jiffies(xfer_time));
 
 		if (time_left == 0) {
 			dev_err(i2c_dev->dev, "DMA transfer timeout\n");
@@ -1116,8 +1124,9 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		}
 	}
 
-	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
-						TEGRA_I2C_TIMEOUT);
+	time_left = wait_for_completion_timeout(
+					&i2c_dev->msg_complete,
+					msecs_to_jiffies(xfer_time));
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
 
 	if (time_left == 0) {
@@ -1374,6 +1383,7 @@  static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->div_clk = div_clk;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->adapter.retries = 1;
+	i2c_dev->adapter.timeout = 6 * HZ;
 	i2c_dev->irq = irq;
 	i2c_dev->cont_id = pdev->id;
 	i2c_dev->dev = &pdev->dev;