Message ID | 20190205173306.20483-17-eric.auger@redhat.com |
---|---|
State | New |
Headers | show |
Series | ARM virt: Initial RAM expansion and PCDIMM/NVDIMM support | expand |
On Tue, 5 Feb 2019 18:33:04 +0100 Eric Auger <eric.auger@redhat.com> wrote: > From: Kwangwoo Lee <kwangwoo.lee@sk.com> > > Pre-plug and plug handlers are prepared for NVDIMM support. > > Signed-off-by: Eric Auger <eric.auger@redhat.com> > Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> > --- > default-configs/arm-softmmu.mak | 2 ++ > hw/arm/virt-acpi-build.c | 6 ++++++ > hw/arm/virt.c | 22 ++++++++++++++++++++++ > include/hw/arm/virt.h | 3 +++ > 4 files changed, 33 insertions(+) > > diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak > index dc4624794f..ddbe87ed15 100644 > --- a/default-configs/arm-softmmu.mak > +++ b/default-configs/arm-softmmu.mak > @@ -162,3 +162,5 @@ CONFIG_HIGHBANK=y > CONFIG_MUSICPAL=y > CONFIG_MEM_DEVICE=y > CONFIG_DIMM=y > +CONFIG_NVDIMM=y > +CONFIG_ACPI_NVDIMM=y > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > index 781eafaf5e..f086adfa82 100644 > --- a/hw/arm/virt-acpi-build.c > +++ b/hw/arm/virt-acpi-build.c > @@ -784,6 +784,7 @@ static > void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > { > VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); > + MachineState *ms = MACHINE(vms); > GArray *table_offsets; > unsigned dsdt, xsdt; > GArray *tables_blob = tables->table_data; > @@ -824,6 +825,11 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > } > } > > + if (vms->acpi_nvdimm_state.is_enabled) { > + nvdimm_build_acpi(table_offsets, tables_blob, tables->linker, > + &vms->acpi_nvdimm_state, ms->ram_slots); > + } > + > if (its_class_name() && !vmc->no_its) { > acpi_add_table(table_offsets, tables_blob); > build_iort(tables_blob, tables->linker, vms); > diff --git a/hw/arm/virt.c b/hw/arm/virt.c > index b683902991..0c8c2cc191 100644 > --- a/hw/arm/virt.c > +++ b/hw/arm/virt.c > @@ -132,6 +132,7 @@ static const MemMapEntry a15memmap[] = { > [VIRT_GPIO] = { 0x09030000, 0x00001000 }, > [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, > [VIRT_SMMU] = { 0x09050000, 0x00020000 }, > + [VIRT_ACPI_IO] = { 0x09070000, 0x00010000 }, where does this range come from and is its size sufficient? > [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, > /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ > [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, > @@ -1637,6 +1638,18 @@ static void machvirt_init(MachineState *machine) > > create_platform_bus(vms, pic); > > + if (vms->acpi_nvdimm_state.is_enabled) { > + AcpiNVDIMMState *acpi_nvdimm_state = &vms->acpi_nvdimm_state; > + > + acpi_nvdimm_state->dsm_io.type = NVDIMM_ACPI_IO_MEMORY; > + acpi_nvdimm_state->dsm_io.base = > + vms->memmap[VIRT_ACPI_IO].base + NVDIMM_ACPI_IO_BASE; > + acpi_nvdimm_state->dsm_io.len = NVDIMM_ACPI_IO_LEN; > + > + nvdimm_init_acpi_state(acpi_nvdimm_state, sysmem, > + vms->fw_cfg, OBJECT(vms)); > + } > + > vms->bootinfo.ram_size = machine->ram_size; > vms->bootinfo.kernel_filename = machine->kernel_filename; > vms->bootinfo.kernel_cmdline = machine->kernel_cmdline; > @@ -1822,10 +1835,19 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev, > DeviceState *dev, Error **errp) > { > VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); > + bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); > Error *local_err = NULL; > > pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); > + if (local_err) { > + goto out; > + } > > + if (is_nvdimm) { > + nvdimm_plug(&vms->acpi_nvdimm_state); > + } > + > +out: > error_propagate(errp, local_err); > } > > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h > index c88f67a492..56d73b0e86 100644 > --- a/include/hw/arm/virt.h > +++ b/include/hw/arm/virt.h > @@ -37,6 +37,7 @@ > #include "hw/arm/arm.h" > #include "sysemu/kvm.h" > #include "hw/intc/arm_gicv3_common.h" > +#include "hw/mem/nvdimm.h" > > #define NUM_GICV2M_SPIS 64 > #define NUM_VIRTIO_TRANSPORTS 32 > @@ -77,6 +78,7 @@ enum { > VIRT_GPIO, > VIRT_SECURE_UART, > VIRT_SECURE_MEM, > + VIRT_ACPI_IO, > VIRT_LOWMEMMAP_LAST, > }; > > @@ -134,6 +136,7 @@ typedef struct { > hwaddr high_io_base; > hwaddr highest_gpa; > bool extended_memmap; > + AcpiNVDIMMState acpi_nvdimm_state; > } VirtMachineState; > > #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
Hi Igor, On 2/18/19 11:30 AM, Igor Mammedov wrote: > On Tue, 5 Feb 2019 18:33:04 +0100 > Eric Auger <eric.auger@redhat.com> wrote: > >> From: Kwangwoo Lee <kwangwoo.lee@sk.com> >> >> Pre-plug and plug handlers are prepared for NVDIMM support. >> >> Signed-off-by: Eric Auger <eric.auger@redhat.com> >> Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> >> --- >> default-configs/arm-softmmu.mak | 2 ++ >> hw/arm/virt-acpi-build.c | 6 ++++++ >> hw/arm/virt.c | 22 ++++++++++++++++++++++ >> include/hw/arm/virt.h | 3 +++ >> 4 files changed, 33 insertions(+) >> >> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak >> index dc4624794f..ddbe87ed15 100644 >> --- a/default-configs/arm-softmmu.mak >> +++ b/default-configs/arm-softmmu.mak >> @@ -162,3 +162,5 @@ CONFIG_HIGHBANK=y >> CONFIG_MUSICPAL=y >> CONFIG_MEM_DEVICE=y >> CONFIG_DIMM=y >> +CONFIG_NVDIMM=y >> +CONFIG_ACPI_NVDIMM=y >> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >> index 781eafaf5e..f086adfa82 100644 >> --- a/hw/arm/virt-acpi-build.c >> +++ b/hw/arm/virt-acpi-build.c >> @@ -784,6 +784,7 @@ static >> void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >> { >> VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); >> + MachineState *ms = MACHINE(vms); >> GArray *table_offsets; >> unsigned dsdt, xsdt; >> GArray *tables_blob = tables->table_data; >> @@ -824,6 +825,11 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >> } >> } >> >> + if (vms->acpi_nvdimm_state.is_enabled) { >> + nvdimm_build_acpi(table_offsets, tables_blob, tables->linker, >> + &vms->acpi_nvdimm_state, ms->ram_slots); >> + } >> + >> if (its_class_name() && !vmc->no_its) { >> acpi_add_table(table_offsets, tables_blob); >> build_iort(tables_blob, tables->linker, vms); >> diff --git a/hw/arm/virt.c b/hw/arm/virt.c >> index b683902991..0c8c2cc191 100644 >> --- a/hw/arm/virt.c >> +++ b/hw/arm/virt.c >> @@ -132,6 +132,7 @@ static const MemMapEntry a15memmap[] = { >> [VIRT_GPIO] = { 0x09030000, 0x00001000 }, >> [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, >> [VIRT_SMMU] = { 0x09050000, 0x00020000 }, >> + [VIRT_ACPI_IO] = { 0x09070000, 0x00010000 }, > where does this range come from and is its size sufficient? I understand it can be anywhere in low mem and must be large enough to contain [NVDIMM_ACPI_IO_BASE, NDIMM_ACPI_IO_BASE + NVDIMM_ACPI_IO_LEN]. So one 64kB page should do the job? Thanks Eric > >> [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, >> /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ >> [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, >> @@ -1637,6 +1638,18 @@ static void machvirt_init(MachineState *machine) >> >> create_platform_bus(vms, pic); >> >> + if (vms->acpi_nvdimm_state.is_enabled) { >> + AcpiNVDIMMState *acpi_nvdimm_state = &vms->acpi_nvdimm_state; >> + >> + acpi_nvdimm_state->dsm_io.type = NVDIMM_ACPI_IO_MEMORY; >> + acpi_nvdimm_state->dsm_io.base = >> + vms->memmap[VIRT_ACPI_IO].base + NVDIMM_ACPI_IO_BASE; >> + acpi_nvdimm_state->dsm_io.len = NVDIMM_ACPI_IO_LEN; >> + >> + nvdimm_init_acpi_state(acpi_nvdimm_state, sysmem, >> + vms->fw_cfg, OBJECT(vms)); >> + } >> + >> vms->bootinfo.ram_size = machine->ram_size; >> vms->bootinfo.kernel_filename = machine->kernel_filename; >> vms->bootinfo.kernel_cmdline = machine->kernel_cmdline; >> @@ -1822,10 +1835,19 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev, >> DeviceState *dev, Error **errp) >> { >> VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); >> + bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); >> Error *local_err = NULL; >> >> pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); >> + if (local_err) { >> + goto out; >> + } >> >> + if (is_nvdimm) { >> + nvdimm_plug(&vms->acpi_nvdimm_state); >> + } >> + >> +out: >> error_propagate(errp, local_err); >> } >> >> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h >> index c88f67a492..56d73b0e86 100644 >> --- a/include/hw/arm/virt.h >> +++ b/include/hw/arm/virt.h >> @@ -37,6 +37,7 @@ >> #include "hw/arm/arm.h" >> #include "sysemu/kvm.h" >> #include "hw/intc/arm_gicv3_common.h" >> +#include "hw/mem/nvdimm.h" >> >> #define NUM_GICV2M_SPIS 64 >> #define NUM_VIRTIO_TRANSPORTS 32 >> @@ -77,6 +78,7 @@ enum { >> VIRT_GPIO, >> VIRT_SECURE_UART, >> VIRT_SECURE_MEM, >> + VIRT_ACPI_IO, >> VIRT_LOWMEMMAP_LAST, >> }; >> >> @@ -134,6 +136,7 @@ typedef struct { >> hwaddr high_io_base; >> hwaddr highest_gpa; >> bool extended_memmap; >> + AcpiNVDIMMState acpi_nvdimm_state; >> } VirtMachineState; >> >> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) >
On Wed, 20 Feb 2019 16:21:05 +0100 Auger Eric <eric.auger@redhat.com> wrote: > Hi Igor, > > On 2/18/19 11:30 AM, Igor Mammedov wrote: > > On Tue, 5 Feb 2019 18:33:04 +0100 > > Eric Auger <eric.auger@redhat.com> wrote: > > > >> From: Kwangwoo Lee <kwangwoo.lee@sk.com> > >> > >> Pre-plug and plug handlers are prepared for NVDIMM support. > >> > >> Signed-off-by: Eric Auger <eric.auger@redhat.com> > >> Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> > >> --- > >> default-configs/arm-softmmu.mak | 2 ++ > >> hw/arm/virt-acpi-build.c | 6 ++++++ > >> hw/arm/virt.c | 22 ++++++++++++++++++++++ > >> include/hw/arm/virt.h | 3 +++ > >> 4 files changed, 33 insertions(+) > >> > >> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak > >> index dc4624794f..ddbe87ed15 100644 > >> --- a/default-configs/arm-softmmu.mak > >> +++ b/default-configs/arm-softmmu.mak > >> @@ -162,3 +162,5 @@ CONFIG_HIGHBANK=y > >> CONFIG_MUSICPAL=y > >> CONFIG_MEM_DEVICE=y > >> CONFIG_DIMM=y > >> +CONFIG_NVDIMM=y > >> +CONFIG_ACPI_NVDIMM=y > >> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > >> index 781eafaf5e..f086adfa82 100644 > >> --- a/hw/arm/virt-acpi-build.c > >> +++ b/hw/arm/virt-acpi-build.c > >> @@ -784,6 +784,7 @@ static > >> void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > >> { > >> VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); > >> + MachineState *ms = MACHINE(vms); > >> GArray *table_offsets; > >> unsigned dsdt, xsdt; > >> GArray *tables_blob = tables->table_data; > >> @@ -824,6 +825,11 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > >> } > >> } > >> > >> + if (vms->acpi_nvdimm_state.is_enabled) { > >> + nvdimm_build_acpi(table_offsets, tables_blob, tables->linker, > >> + &vms->acpi_nvdimm_state, ms->ram_slots); > >> + } > >> + > >> if (its_class_name() && !vmc->no_its) { > >> acpi_add_table(table_offsets, tables_blob); > >> build_iort(tables_blob, tables->linker, vms); > >> diff --git a/hw/arm/virt.c b/hw/arm/virt.c > >> index b683902991..0c8c2cc191 100644 > >> --- a/hw/arm/virt.c > >> +++ b/hw/arm/virt.c > >> @@ -132,6 +132,7 @@ static const MemMapEntry a15memmap[] = { > >> [VIRT_GPIO] = { 0x09030000, 0x00001000 }, > >> [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, > >> [VIRT_SMMU] = { 0x09050000, 0x00020000 }, > >> + [VIRT_ACPI_IO] = { 0x09070000, 0x00010000 }, > > where does this range come from and is its size sufficient? > I understand it can be anywhere in low mem and must be large enough to > contain [NVDIMM_ACPI_IO_BASE, NDIMM_ACPI_IO_BASE + NVDIMM_ACPI_IO_LEN]. it looked to like generic ACPI arrea rather than NVDIMM so I'd suggest to name it properly and probably use NVDIMM_ACPI_IO_BASE & co to add this entry so that reader won't have to wonder where this magic numbers come from. > So one 64kB page should do the job? Should it be located in lowmem? (do we care about device_memory & AVMF & ACPI & not 64bit guests?) > Thanks > > Eric > > > >> [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, > >> /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ > >> [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, > >> @@ -1637,6 +1638,18 @@ static void machvirt_init(MachineState *machine) > >> > >> create_platform_bus(vms, pic); > >> > >> + if (vms->acpi_nvdimm_state.is_enabled) { > >> + AcpiNVDIMMState *acpi_nvdimm_state = &vms->acpi_nvdimm_state; > >> + > >> + acpi_nvdimm_state->dsm_io.type = NVDIMM_ACPI_IO_MEMORY; > >> + acpi_nvdimm_state->dsm_io.base = > >> + vms->memmap[VIRT_ACPI_IO].base + NVDIMM_ACPI_IO_BASE; > >> + acpi_nvdimm_state->dsm_io.len = NVDIMM_ACPI_IO_LEN; > >> + > >> + nvdimm_init_acpi_state(acpi_nvdimm_state, sysmem, > >> + vms->fw_cfg, OBJECT(vms)); > >> + } > >> + > >> vms->bootinfo.ram_size = machine->ram_size; > >> vms->bootinfo.kernel_filename = machine->kernel_filename; > >> vms->bootinfo.kernel_cmdline = machine->kernel_cmdline; > >> @@ -1822,10 +1835,19 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev, > >> DeviceState *dev, Error **errp) > >> { > >> VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); > >> + bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); > >> Error *local_err = NULL; > >> > >> pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); > >> + if (local_err) { > >> + goto out; > >> + } > >> > >> + if (is_nvdimm) { > >> + nvdimm_plug(&vms->acpi_nvdimm_state); > >> + } > >> + > >> +out: > >> error_propagate(errp, local_err); > >> } > >> > >> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h > >> index c88f67a492..56d73b0e86 100644 > >> --- a/include/hw/arm/virt.h > >> +++ b/include/hw/arm/virt.h > >> @@ -37,6 +37,7 @@ > >> #include "hw/arm/arm.h" > >> #include "sysemu/kvm.h" > >> #include "hw/intc/arm_gicv3_common.h" > >> +#include "hw/mem/nvdimm.h" > >> > >> #define NUM_GICV2M_SPIS 64 > >> #define NUM_VIRTIO_TRANSPORTS 32 > >> @@ -77,6 +78,7 @@ enum { > >> VIRT_GPIO, > >> VIRT_SECURE_UART, > >> VIRT_SECURE_MEM, > >> + VIRT_ACPI_IO, > >> VIRT_LOWMEMMAP_LAST, > >> }; > >> > >> @@ -134,6 +136,7 @@ typedef struct { > >> hwaddr high_io_base; > >> hwaddr highest_gpa; > >> bool extended_memmap; > >> + AcpiNVDIMMState acpi_nvdimm_state; > >> } VirtMachineState; > >> > >> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) > >
Hi Igor, On 2/21/19 1:16 PM, Igor Mammedov wrote: > On Wed, 20 Feb 2019 16:21:05 +0100 > Auger Eric <eric.auger@redhat.com> wrote: > >> Hi Igor, >> >> On 2/18/19 11:30 AM, Igor Mammedov wrote: >>> On Tue, 5 Feb 2019 18:33:04 +0100 >>> Eric Auger <eric.auger@redhat.com> wrote: >>> >>>> From: Kwangwoo Lee <kwangwoo.lee@sk.com> >>>> >>>> Pre-plug and plug handlers are prepared for NVDIMM support. >>>> >>>> Signed-off-by: Eric Auger <eric.auger@redhat.com> >>>> Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> >>>> --- >>>> default-configs/arm-softmmu.mak | 2 ++ >>>> hw/arm/virt-acpi-build.c | 6 ++++++ >>>> hw/arm/virt.c | 22 ++++++++++++++++++++++ >>>> include/hw/arm/virt.h | 3 +++ >>>> 4 files changed, 33 insertions(+) >>>> >>>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak >>>> index dc4624794f..ddbe87ed15 100644 >>>> --- a/default-configs/arm-softmmu.mak >>>> +++ b/default-configs/arm-softmmu.mak >>>> @@ -162,3 +162,5 @@ CONFIG_HIGHBANK=y >>>> CONFIG_MUSICPAL=y >>>> CONFIG_MEM_DEVICE=y >>>> CONFIG_DIMM=y >>>> +CONFIG_NVDIMM=y >>>> +CONFIG_ACPI_NVDIMM=y >>>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >>>> index 781eafaf5e..f086adfa82 100644 >>>> --- a/hw/arm/virt-acpi-build.c >>>> +++ b/hw/arm/virt-acpi-build.c >>>> @@ -784,6 +784,7 @@ static >>>> void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >>>> { >>>> VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); >>>> + MachineState *ms = MACHINE(vms); >>>> GArray *table_offsets; >>>> unsigned dsdt, xsdt; >>>> GArray *tables_blob = tables->table_data; >>>> @@ -824,6 +825,11 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >>>> } >>>> } >>>> >>>> + if (vms->acpi_nvdimm_state.is_enabled) { >>>> + nvdimm_build_acpi(table_offsets, tables_blob, tables->linker, >>>> + &vms->acpi_nvdimm_state, ms->ram_slots); >>>> + } >>>> + >>>> if (its_class_name() && !vmc->no_its) { >>>> acpi_add_table(table_offsets, tables_blob); >>>> build_iort(tables_blob, tables->linker, vms); >>>> diff --git a/hw/arm/virt.c b/hw/arm/virt.c >>>> index b683902991..0c8c2cc191 100644 >>>> --- a/hw/arm/virt.c >>>> +++ b/hw/arm/virt.c >>>> @@ -132,6 +132,7 @@ static const MemMapEntry a15memmap[] = { >>>> [VIRT_GPIO] = { 0x09030000, 0x00001000 }, >>>> [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, >>>> [VIRT_SMMU] = { 0x09050000, 0x00020000 }, >>>> + [VIRT_ACPI_IO] = { 0x09070000, 0x00010000 }, >>> where does this range come from and is its size sufficient? >> I understand it can be anywhere in low mem and must be large enough to >> contain [NVDIMM_ACPI_IO_BASE, NDIMM_ACPI_IO_BASE + NVDIMM_ACPI_IO_LEN]. > it looked to like generic ACPI arrea rather than NVDIMM > so I'd suggest to name it properly and probably use NVDIMM_ACPI_IO_BASE & co > to add this entry so that reader won't have to wonder where this magic numbers > come from. OK. I will rename the region in v8 > >> So one 64kB page should do the job? > Should it be located in lowmem? > (do we care about device_memory & AVMF & ACPI & not 64bit guests?) I guess no. We could easily fit this region into the existing low mem IO, that's what I meant actually. Thanks Eric > > >> Thanks >> >> Eric >>> >>>> [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, >>>> /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ >>>> [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, >>>> @@ -1637,6 +1638,18 @@ static void machvirt_init(MachineState *machine) >>>> >>>> create_platform_bus(vms, pic); >>>> >>>> + if (vms->acpi_nvdimm_state.is_enabled) { >>>> + AcpiNVDIMMState *acpi_nvdimm_state = &vms->acpi_nvdimm_state; >>>> + >>>> + acpi_nvdimm_state->dsm_io.type = NVDIMM_ACPI_IO_MEMORY; >>>> + acpi_nvdimm_state->dsm_io.base = >>>> + vms->memmap[VIRT_ACPI_IO].base + NVDIMM_ACPI_IO_BASE; >>>> + acpi_nvdimm_state->dsm_io.len = NVDIMM_ACPI_IO_LEN; >>>> + >>>> + nvdimm_init_acpi_state(acpi_nvdimm_state, sysmem, >>>> + vms->fw_cfg, OBJECT(vms)); >>>> + } >>>> + >>>> vms->bootinfo.ram_size = machine->ram_size; >>>> vms->bootinfo.kernel_filename = machine->kernel_filename; >>>> vms->bootinfo.kernel_cmdline = machine->kernel_cmdline; >>>> @@ -1822,10 +1835,19 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev, >>>> DeviceState *dev, Error **errp) >>>> { >>>> VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); >>>> + bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); >>>> Error *local_err = NULL; >>>> >>>> pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); >>>> + if (local_err) { >>>> + goto out; >>>> + } >>>> >>>> + if (is_nvdimm) { >>>> + nvdimm_plug(&vms->acpi_nvdimm_state); >>>> + } >>>> + >>>> +out: >>>> error_propagate(errp, local_err); >>>> } >>>> >>>> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h >>>> index c88f67a492..56d73b0e86 100644 >>>> --- a/include/hw/arm/virt.h >>>> +++ b/include/hw/arm/virt.h >>>> @@ -37,6 +37,7 @@ >>>> #include "hw/arm/arm.h" >>>> #include "sysemu/kvm.h" >>>> #include "hw/intc/arm_gicv3_common.h" >>>> +#include "hw/mem/nvdimm.h" >>>> >>>> #define NUM_GICV2M_SPIS 64 >>>> #define NUM_VIRTIO_TRANSPORTS 32 >>>> @@ -77,6 +78,7 @@ enum { >>>> VIRT_GPIO, >>>> VIRT_SECURE_UART, >>>> VIRT_SECURE_MEM, >>>> + VIRT_ACPI_IO, >>>> VIRT_LOWMEMMAP_LAST, >>>> }; >>>> >>>> @@ -134,6 +136,7 @@ typedef struct { >>>> hwaddr high_io_base; >>>> hwaddr highest_gpa; >>>> bool extended_memmap; >>>> + AcpiNVDIMMState acpi_nvdimm_state; >>>> } VirtMachineState; >>>> >>>> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) >>> > >
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index dc4624794f..ddbe87ed15 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -162,3 +162,5 @@ CONFIG_HIGHBANK=y CONFIG_MUSICPAL=y CONFIG_MEM_DEVICE=y CONFIG_DIMM=y +CONFIG_NVDIMM=y +CONFIG_ACPI_NVDIMM=y diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 781eafaf5e..f086adfa82 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -784,6 +784,7 @@ static void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) { VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); + MachineState *ms = MACHINE(vms); GArray *table_offsets; unsigned dsdt, xsdt; GArray *tables_blob = tables->table_data; @@ -824,6 +825,11 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } } + if (vms->acpi_nvdimm_state.is_enabled) { + nvdimm_build_acpi(table_offsets, tables_blob, tables->linker, + &vms->acpi_nvdimm_state, ms->ram_slots); + } + if (its_class_name() && !vmc->no_its) { acpi_add_table(table_offsets, tables_blob); build_iort(tables_blob, tables->linker, vms); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index b683902991..0c8c2cc191 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -132,6 +132,7 @@ static const MemMapEntry a15memmap[] = { [VIRT_GPIO] = { 0x09030000, 0x00001000 }, [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 }, [VIRT_SMMU] = { 0x09050000, 0x00020000 }, + [VIRT_ACPI_IO] = { 0x09070000, 0x00010000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -1637,6 +1638,18 @@ static void machvirt_init(MachineState *machine) create_platform_bus(vms, pic); + if (vms->acpi_nvdimm_state.is_enabled) { + AcpiNVDIMMState *acpi_nvdimm_state = &vms->acpi_nvdimm_state; + + acpi_nvdimm_state->dsm_io.type = NVDIMM_ACPI_IO_MEMORY; + acpi_nvdimm_state->dsm_io.base = + vms->memmap[VIRT_ACPI_IO].base + NVDIMM_ACPI_IO_BASE; + acpi_nvdimm_state->dsm_io.len = NVDIMM_ACPI_IO_LEN; + + nvdimm_init_acpi_state(acpi_nvdimm_state, sysmem, + vms->fw_cfg, OBJECT(vms)); + } + vms->bootinfo.ram_size = machine->ram_size; vms->bootinfo.kernel_filename = machine->kernel_filename; vms->bootinfo.kernel_cmdline = machine->kernel_cmdline; @@ -1822,10 +1835,19 @@ static void virt_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); Error *local_err = NULL; pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err); + if (local_err) { + goto out; + } + if (is_nvdimm) { + nvdimm_plug(&vms->acpi_nvdimm_state); + } + +out: error_propagate(errp, local_err); } diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index c88f67a492..56d73b0e86 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -37,6 +37,7 @@ #include "hw/arm/arm.h" #include "sysemu/kvm.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/mem/nvdimm.h" #define NUM_GICV2M_SPIS 64 #define NUM_VIRTIO_TRANSPORTS 32 @@ -77,6 +78,7 @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_ACPI_IO, VIRT_LOWMEMMAP_LAST, }; @@ -134,6 +136,7 @@ typedef struct { hwaddr high_io_base; hwaddr highest_gpa; bool extended_memmap; + AcpiNVDIMMState acpi_nvdimm_state; } VirtMachineState; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)