diff mbox series

[PULL,08/10] s390x/pci: Fix hotplugging of PCI bridges

Message ID 20190205164109.25413-9-cohuck@redhat.com
State New
Headers show
Series [PULL,01/10] target/s390x: define TCG_GUEST_DEFAULT_MO for MTTCG | expand

Commit Message

Cornelia Huck Feb. 5, 2019, 4:41 p.m. UTC 
From: David Hildenbrand <david@redhat.com>

When hotplugging a PCI bridge right now to the root port, we resolve
pci_get_bus(pdev)->parent_dev, which results in a SEGFAULT. Hotplugging
really only works right now when hotplugging to another bridge.

Instead, we have to properly check if we are already at the root.

Let's cleanup the code while at it a bit and factor out updating the
subordinate bus number into a separate function. The check for
"old_nr < nr" is right now not strictly necessary, but makes it more
obvious what is actually going on.

Most probably fixing up the topology is not our responsibility when
hotplugging. The guest has to sort this out. But let's keep it for now
and only fix current code to not crash.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190130155733.32742-3-david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
---
 hw/s390x/s390-pci-bus.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 4200e48fb9..d85bc34617 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -877,6 +877,21 @@  static void s390_pcihost_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
     }
 }
 
+static void s390_pci_update_subordinate(PCIDevice *dev, uint32_t nr)
+{
+    uint32_t old_nr;
+
+    pci_default_write_config(dev, PCI_SUBORDINATE_BUS, nr, 1);
+    while (!pci_bus_is_root(pci_get_bus(dev))) {
+        dev = pci_get_bus(dev)->parent_dev;
+
+        old_nr = pci_default_read_config(dev, PCI_SUBORDINATE_BUS, 1);
+        if (old_nr < nr) {
+            pci_default_write_config(dev, PCI_SUBORDINATE_BUS, nr, 1);
+        }
+    }
+}
+
 static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                               Error **errp)
 {
@@ -885,26 +900,21 @@  static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
     S390PCIBusDevice *pbdev = NULL;
 
     if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) {
-        BusState *bus;
         PCIBridge *pb = PCI_BRIDGE(dev);
-        PCIDevice *pdev = PCI_DEVICE(dev);
 
+        pdev = PCI_DEVICE(dev);
         pci_bridge_map_irq(pb, dev->id, s390_pci_map_irq);
         pci_setup_iommu(&pb->sec_bus, s390_pci_dma_iommu, s);
 
-        bus = BUS(&pb->sec_bus);
-        qbus_set_hotplug_handler(bus, DEVICE(s), errp);
+        qbus_set_hotplug_handler(BUS(&pb->sec_bus), DEVICE(s), errp);
 
         if (dev->hotplugged) {
             pci_default_write_config(pdev, PCI_PRIMARY_BUS,
                                      pci_dev_bus_num(pdev), 1);
             s->bus_no += 1;
             pci_default_write_config(pdev, PCI_SECONDARY_BUS, s->bus_no, 1);
-            do {
-                pdev = pci_get_bus(pdev)->parent_dev;
-                pci_default_write_config(pdev, PCI_SUBORDINATE_BUS,
-                                         s->bus_no, 1);
-            } while (pci_get_bus(pdev) && pci_dev_bus_num(pdev));
+
+            s390_pci_update_subordinate(pdev, s->bus_no);
         }
     } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
         pdev = PCI_DEVICE(dev);