| Message ID | 20190122132135.5012-3-dev@pschenker.ch |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Adding DTS to support STMPE811 ADC on Toradex Boards | expand |
On 22.01.2019 14:21, Philippe Schenker wrote: > From: Philippe Schenker <philippe.schenker@toradex.com> > > Add the stmpe-adc DT node as found on Toradex T30 modules > > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Stefan Agner <stefan@agner.ch> > > --- > > arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++-------- > arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++-------- > arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++-------- > 3 files changed, 42 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi > b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi > index 02f8126481a2..8b7a827d604d 100644 > --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi > +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi > @@ -994,11 +994,17 @@ > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; > + /* 3.25 MHz ADC clock speed */ > + st,adc-freq = <1>; > + /* 12-bit ADC */ > + st,mod-12b = <1>; > + /* internal ADC reference */ > + st,ref-sel = <0>; > + /* ADC converstion time: 80 clocks */ > + st,sample-time = <4>; > > stmpe_touchscreen { > compatible = "st,stmpe-ts"; > - /* 3.25 MHz ADC clock speed */ > - st,adc-freq = <1>; > /* 8 sample average control */ > st,ave-ctrl = <3>; > /* 7 length fractional part in z */ > @@ -1008,17 +1014,17 @@ > * current limit value > */ > st,i-drive = <1>; > - /* 12-bit ADC */ > - st,mod-12b = <1>; > - /* internal ADC reference */ > - st,ref-sel = <0>; > - /* ADC converstion time: 80 clocks */ > - st,sample-time = <4>; > /* 1 ms panel driver settling time */ > st,settling = <3>; > /* 5 ms touch detect interrupt delay */ > st,touch-det-delay = <5>; > }; > + > + stmpe_adc { > + compatible = "st,stmpe-adc"; > + /* forbid to use ADC channels 3-0 (touch) */ > + st,norequest-mask = <0x0F>; > + }; > }; > > /* > diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi > b/arch/arm/boot/dts/tegra30-apalis.dtsi > index 7f112f192fe9..c18f6f61d764 100644 > --- a/arch/arm/boot/dts/tegra30-apalis.dtsi > +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi > @@ -976,11 +976,17 @@ > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; > + /* 3.25 MHz ADC clock speed */ > + st,adc-freq = <1>; > + /* 12-bit ADC */ > + st,mod-12b = <1>; > + /* internal ADC reference */ > + st,ref-sel = <0>; > + /* ADC converstion time: 80 clocks */ > + st,sample-time = <4>; > > stmpe_touchscreen { > compatible = "st,stmpe-ts"; > - /* 3.25 MHz ADC clock speed */ > - st,adc-freq = <1>; > /* 8 sample average control */ > st,ave-ctrl = <3>; > /* 7 length fractional part in z */ > @@ -990,17 +996,17 @@ > * current limit value > */ > st,i-drive = <1>; > - /* 12-bit ADC */ > - st,mod-12b = <1>; > - /* internal ADC reference */ > - st,ref-sel = <0>; > - /* ADC converstion time: 80 clocks */ > - st,sample-time = <4>; > /* 1 ms panel driver settling time */ > st,settling = <3>; > /* 5 ms touch detect interrupt delay */ > st,touch-det-delay = <5>; > }; > + > + stmpe_adc { > + compatible = "st,stmpe-adc"; > + /* forbid to use ADC channels 3-0 (touch) */ > + st,norequest-mask = <0x0F>; > + }; > }; > > /* > diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi > b/arch/arm/boot/dts/tegra30-colibri.dtsi > index 35af03ca9e90..3c421a5cfbc2 100644 > --- a/arch/arm/boot/dts/tegra30-colibri.dtsi > +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi > @@ -845,11 +845,17 @@ > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; > + /* 3.25 MHz ADC clock speed */ > + st,adc-freq = <1>; > + /* 12-bit ADC */ > + st,mod-12b = <1>; > + /* internal ADC reference */ > + st,ref-sel = <0>; > + /* ADC converstion time: 80 clocks */ > + st,sample-time = <4>; > > stmpe_touchscreen { > compatible = "st,stmpe-ts"; > - /* 3.25 MHz ADC clock speed */ > - st,adc-freq = <1>; > /* 8 sample average control */ > st,ave-ctrl = <3>; > /* 7 length fractional part in z */ > @@ -859,17 +865,17 @@ > * current limit value > */ > st,i-drive = <1>; > - /* 12-bit ADC */ > - st,mod-12b = <1>; > - /* internal ADC reference */ > - st,ref-sel = <0>; > - /* ADC converstion time: 80 clocks */ > - st,sample-time = <4>; > /* 1 ms panel driver settling time */ > st,settling = <3>; > /* 5 ms touch detect interrupt delay */ > st,touch-det-delay = <5>; > }; > + > + stmpe_adc { > + compatible = "st,stmpe-adc"; > + /* forbid to use ADC channels 3-0 (touch) */ > + st,norequest-mask = <0x0F>; > + }; > }; > > /*
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 02f8126481a2..8b7a827d604d 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 7f112f192fe9..c18f6f61d764 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 35af03ca9e90..3c421a5cfbc2 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -845,11 +845,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -859,17 +865,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*