@@ -25,9 +25,11 @@ Required Properties:
Optional Properties:
- reset-gpios: Reference to the GPIO connected to the reset input.
- - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
- children in idle state. This is necessary for example, if there are several
- multiplexers on the bus and the devices behind them use same I2C addresses.
+ - i2c-mux-no-idle-disconnect: Boolean; if defined, asks mux to not
+ disconnect children in idle state. This optimises I2C parent
+ operations and is useful if it is guaranteed that there are no
+ multiplexers on the bus with devices behind them using the same
+ I2C address.
- interrupts: Interrupt mapping for IRQ.
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be two.