Documentation: gpio: driver: fix wire name for I2C
diff mbox series

Message ID 20190117101321.2164-1-wsa+renesas@sang-engineering.com
State New
Headers show
Series
  • Documentation: gpio: driver: fix wire name for I2C
Related show

Commit Message

Wolfram Sang Jan. 17, 2019, 10:13 a.m. UTC
Typo: the data line is called "SDA" not "SCA".

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 Documentation/driver-api/gpio/driver.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Geert Uytterhoeven Jan. 17, 2019, 10:24 a.m. UTC | #1
On Thu, Jan 17, 2019 at 11:14 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> Typo: the data line is called "SDA" not "SCA".
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
Bartosz Golaszewski Jan. 17, 2019, 12:12 p.m. UTC | #2
czw., 17 sty 2019 o 11:24 Geert Uytterhoeven <geert@linux-m68k.org> napisaƂ(a):
>
> On Thu, Jan 17, 2019 at 11:14 AM Wolfram Sang
> <wsa+renesas@sang-engineering.com> wrote:
> > Typo: the data line is called "SDA" not "SCA".
> >
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>

Applied to for-next, thanks!

Bart

Patch
diff mbox series

diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index a92d8837b62b..3043167fc557 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -135,7 +135,7 @@  This configuration is normally used as a way to achieve one of two things:
 - inverse wire-OR on an I/O line, for example a GPIO line, making it possible
   for any driving stage on the line to drive it low even if any other output
   to the same line is simultaneously driving it high. A special case of this
-  is driving the SCL and SCA lines of an I2C bus, which is by definition a
+  is driving the SCL and SDA lines of an I2C bus, which is by definition a
   wire-OR bus.
 
 Both usecases require that the line be equipped with a pull-up resistor. This