diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
index fe63289..143843f 100644
--- a/drivers/pwm/pwm-bcm-kona.c
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/ioport.h>
 #include <linux/math64.h>
 #include <linux/module.h>
@@ -65,10 +66,19 @@
 #define DUTY_CYCLE_HIGH_MIN			(0x00000000)
 #define DUTY_CYCLE_HIGH_MAX			(0x00ffffff)
 
+#define PWM_MONITOR_OFFSET			0xb0
+#define PWM_MONITOR_TIMEOUT_US			5
+
+enum kona_pwmc_ver {
+	KONA_PWM = 1,
+	CYGNUS_PWM
+};
+
 struct kona_pwmc {
 	struct pwm_chip chip;
 	void __iomem *base;
 	struct clk *clk;
+	enum kona_pwmc_ver version;
 };
 
 static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
@@ -76,10 +86,36 @@ static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
 	return container_of(_chip, struct kona_pwmc, chip);
 }
 
+static int kona_pwmc_wait_stable(struct pwm_chip *chip, unsigned int chan,
+				 unsigned int kona_ver)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int value;
+
+	switch (kona_ver) {
+	case KONA_PWM:
+		/*
+		 * There must be a min 400ns delay between clearing trigger and
+		 * settingit. Failing to do this may result in no PWM signal.
+		 */
+		ndelay(400);
+		return 0;
+
+	case CYGNUS_PWM:
+		return readl_poll_timeout(kp->base + PWM_MONITOR_OFFSET, value,
+					  !(value & (BIT(chan))), 0,
+					  PWM_MONITOR_TIMEOUT_US);
+
+	default:
+		return -ENODEV;
+
+	}
+}
+
 /*
  * Clear trigger bit but set smooth bit to maintain old output.
  */
-static void kona_pwmc_prepare_for_settings(struct kona_pwmc *kp,
+static int kona_pwmc_prepare_for_settings(struct kona_pwmc *kp,
 	unsigned int chan)
 {
 	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
@@ -88,14 +124,10 @@ static void kona_pwmc_prepare_for_settings(struct kona_pwmc *kp,
 	value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
 	writel(value, kp->base + PWM_CONTROL_OFFSET);
 
-	/*
-	 * There must be a min 400ns delay between clearing trigger and setting
-	 * it. Failing to do this may result in no PWM signal.
-	 */
-	ndelay(400);
+	return kona_pwmc_wait_stable(&kp->chip, chan, kp->version);
 }
 
-static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
+static int kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
 {
 	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
 
@@ -104,8 +136,7 @@ static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
 	value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
 	writel(value, kp->base + PWM_CONTROL_OFFSET);
 
-	/* Trigger bit must be held high for at least 400 ns. */
-	ndelay(400);
+	return kona_pwmc_wait_stable(&kp->chip, chan, kp->version);
 }
 
 static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -113,8 +144,13 @@ static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct kona_pwmc *kp = to_kona_pwmc(chip);
 	unsigned int chan = pwm->hwpwm;
 	unsigned int value;
+	int ret;
 
-	kona_pwmc_prepare_for_settings(kp, chan);
+	ret = kona_pwmc_prepare_for_settings(kp, chan);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to prepare pwm settings: %d\n", ret);
+		return;
+	}
 
 	/* Simulate a disable by configuring for zero duty */
 	writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
@@ -125,7 +161,11 @@ static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	value &= ~PRESCALE_MASK(chan);
 	writel(value, kp->base + PRESCALE_OFFSET);
 
-	kona_pwmc_apply_settings(kp, chan);
+	ret = kona_pwmc_apply_settings(kp, chan);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to apply pwm settings: %d\n", ret);
+		return;
+	}
 
 	clk_disable_unprepare(kp->clk);
 }
@@ -188,7 +228,12 @@ static int kona_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			}
 		}
 
-		kona_pwmc_prepare_for_settings(kp, chan);
+		ret = kona_pwmc_prepare_for_settings(kp, chan);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"failed to prepare pwm settings: %d\n", ret);
+			return ret;
+		}
 
 		value = readl(kp->base + PRESCALE_OFFSET);
 		value &= ~PRESCALE_MASK(chan);
@@ -208,7 +253,12 @@ static int kona_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			writel(value, kp->base + PWM_CONTROL_OFFSET);
 		}
 
-		kona_pwmc_apply_settings(kp, chan);
+		ret = kona_pwmc_apply_settings(kp, chan);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"failed to prepare pwm settings: %d\n", ret);
+			return ret;
+		}
 	} else if (cstate.enabled) {
 		kona_pwmc_disable(chip, pwm);
 	}
@@ -221,14 +271,26 @@ static int kona_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	.owner = THIS_MODULE,
 };
 
+static const struct of_device_id bcm_kona_pwmc_dt[] = {
+	{ .compatible = "brcm,kona-pwm", .data = (void *)KONA_PWM},
+	{ .compatible = "brcm,cygnus-pwm", .data = (void *)CYGNUS_PWM},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
+
 static int kona_pwmc_probe(struct platform_device *pdev)
 {
 	struct kona_pwmc *kp;
 	struct resource *res;
+	const struct of_device_id *of_id;
 	unsigned int chan;
 	unsigned int value = 0;
 	int ret = 0;
 
+	of_id = of_match_node(bcm_kona_pwmc_dt, pdev->dev.of_node);
+	if (!of_id)
+		return -ENODEV;
+
 	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
 	if (kp == NULL)
 		return -ENOMEM;
@@ -241,6 +303,7 @@ static int kona_pwmc_probe(struct platform_device *pdev)
 	kp->chip.npwm = 6;
 	kp->chip.of_xlate = of_pwm_xlate_with_flags;
 	kp->chip.of_pwm_n_cells = 3;
+	kp->version = (enum kona_pwmc_ver)of_id->data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	kp->base = devm_ioremap_resource(&pdev->dev, res);
@@ -287,12 +350,6 @@ static int kona_pwmc_remove(struct platform_device *pdev)
 	return pwmchip_remove(&kp->chip);
 }
 
-static const struct of_device_id bcm_kona_pwmc_dt[] = {
-	{ .compatible = "brcm,kona-pwm" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
-
 static struct platform_driver kona_pwmc_driver = {
 	.driver = {
 		.name = "bcm-kona-pwm",
