[U-Boot,v6,4/6] MSCC: Add device tree for Jaguar2-48 board

Message ID 1547245880-23438-5-git-send-email-horatiu.vultur@microchip.com
State Superseded
Delegated to: Daniel Schwierzeck
Headers show
Series
  • MSCC: Add Jaguar2 SOC family
Related show

Commit Message

Horatiu Vultur Jan. 11, 2019, 10:31 p.m.
Add device tree based on evaluation board pcb111.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 arch/mips/dts/jr2_pcb111.dts | 74 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 arch/mips/dts/jr2_pcb111.dts

Patch

diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/mips/dts/jr2_pcb111.dts
new file mode 100644
index 0000000..4d411b6
--- /dev/null
+++ b/arch/mips/dts/jr2_pcb111.dts
@@ -0,0 +1,74 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "mscc,jr2.dtsi"
+
+/ {
+	model = "Jaguar2 Cu48 PCB111 Reference Board";
+	compatible = "mscc,jr2-pcb111", "mscc,jr2";
+
+	aliases {
+		spi0 = &spi0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "pcb111:green:status";
+			gpios = <&gpio 12 0>;
+			default-state = "on";
+		};
+
+		status_red {
+			label = "pcb111:red:status";
+			gpios = <&gpio 13 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	spi-flash@0 {
+		compatible = "spi-flash";
+		spi-max-frequency = <18000000>; /* input clock */
+		reg = <0>; /* CS0 */
+	};
+};
+
+&gpio {
+	/* SPIO only use DO, CLK, no inputs */
+	sgpio1_pins: sgpio1-pins {
+		pins = "GPIO_4", "GPIO_5";
+		function = "sg1";
+	};
+};
+
+&sgpio {
+	status = "okay";
+	sgpio-ports = <0xffffffff>;
+};
+
+&sgpio1 {
+	status = "okay";
+	sgpio-ports = <0x001effff>;
+};
+
+&sgpio2 {
+	status = "okay";
+	sgpio-ports = <0xff000000>;
+	gpio-ranges = <&sgpio2 0 0 96>;
+};