[v10,07/12] dt-bindings: mfd: Add a document for PECI client driver

Message ID 20190107214136.5256-8-jae.hyun.yoo@linux.intel.com
State Not Applicable, archived
Headers show
Series
  • PECI device driver introduction
Related show

Commit Message

Jae Hyun Yoo Jan. 7, 2019, 9:41 p.m.
This commit adds a dt-bindings document for PECI client driver.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/mfd/intel-peci-client.txt        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt

Comments

Joel Stanley Jan. 14, 2019, 11:39 a.m. | #1
On Tue, 8 Jan 2019 at 08:11, Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> wrote:
>
> This commit adds a dt-bindings document for PECI client driver.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: James Feist <james.feist@linux.intel.com>
> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Reviewed-by: Joel Stanley <joel@jms.id.au>

Patch

diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
new file mode 100644
index 000000000000..5d1d5d0a552f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
@@ -0,0 +1,34 @@ 
+* Intel PECI client bindings
+
+PECI (Platform Environment Control Interface) is a one-wire bus interface that
+provides a communication channel from PECI clients in Intel processors and
+chipset components to external monitoring or control devices. PECI is designed
+to support the following sideband functions:
+
+- Processor and DRAM thermal management
+- Platform Manageability
+- Processor Interface Tuning and Diagnostics
+- Failure Analysis
+
+Required properties:
+- compatible : Should be "intel,peci-client".
+- reg        : Should contain address of a client CPU. According to the PECI
+	       specification, client addresses start from 0x30.
+
+Example:
+	peci-bus@0 {
+		compatible = "vendor,soc-peci";
+		reg = <0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		peci-client@30 {
+			compatible = "intel,peci-client";
+			reg = <0x30>;
+		};
+
+		peci-client@31 {
+			compatible = "intel,peci-client";
+			reg = <0x31>;
+		};
+	};