@@ -192,119 +192,6 @@ source "drivers/net/phy/Kconfig"
source "drivers/net/ethernet/Kconfig"
-menuconfig NET_ETHERNET
- bool "Ethernet (10 or 100Mbit)"
- depends on !UML
- ---help---
- Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
- type of Local Area Network (LAN) in universities and companies.
-
- Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
- coaxial cable, linking computers in a chain), 10BASE-T or twisted
- pair (10 Mbps over twisted pair cable, linking computers to central
- hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
- 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
- 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
- cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
- [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
- Ethernet (1 Gbps over optical fiber or short copper links).
-
- If your Linux machine will be connected to an Ethernet and you have
- an Ethernet network interface card (NIC) installed in your computer,
- say Y here and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. You will then also have
- to say Y to the driver for your particular NIC.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Ethernet network cards. If unsure, say N.
-
-if NET_ETHERNET
-
-config NET_PCI
- bool "EISA, VLB, PCI and on board controllers"
- depends on ISA || EISA || PCI
- help
- This is another class of network cards which attach directly to the
- bus. If you have one of those, say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about this class of network cards. If you say Y, you
- will be asked for your specific card in the following questions. If
- you are unsure, say Y.
-
-config NET_POCKET
- bool "Pocket and portable adapters"
- depends on PARPORT
- ---help---
- Cute little network (Ethernet) devices which attach to the parallel
- port ("pocket adapters"), commonly used with laptops. If you have
- one of those, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- If you want to plug a network (or some other) card into the PCMCIA
- (or PC-card) slot of your laptop instead (PCMCIA is the standard for
- credit card size extension cards used by all modern laptops), you
- need the pcmcia-cs package (location contained in the file
- <file:Documentation/Changes>) and you can say N here.
-
- Laptop users should read the Linux Laptop home page at
- <http://www.linux-on-laptops.com/> or
- Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about this class of network devices. If you say Y, you
- will be asked for your specific device in the following questions.
-
-endif # NET_ETHERNET
-
-#
-# Gigabit Ethernet
-#
-
-menuconfig NETDEV_1000
- bool "Ethernet (1000 Mbit)"
- depends on !UML
- default y
- ---help---
- Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
- type of Local Area Network (LAN) in universities and companies.
-
- Say Y here to get to see options for Gigabit Ethernet drivers.
- This option alone does not add any kernel code.
- Note that drivers supporting both 100 and 1000 MBit may be listed
- under "Ethernet (10 or 100MBit)" instead.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_1000
-
-endif # NETDEV_1000
-
-#
-# 10 Gigabit Ethernet
-#
-
-menuconfig NETDEV_10000
- bool "Ethernet (10000 Mbit)"
- depends on !UML
- default y
- ---help---
- Say Y here to get to see options for 10 Gigabit Ethernet drivers.
- This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_10000
-
-config MDIO
- tristate
-
-endif # NETDEV_10000
-
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
@@ -13,9 +13,7 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
# link order important here
#
obj-$(CONFIG_PLIP) += plip.o
-
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_RIONET) += rionet.o
@@ -26,7 +24,6 @@ obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
@@ -36,7 +33,6 @@ obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
obj-$(CONFIG_PPPOL2TP) += pppox.o
obj-$(CONFIG_PPTP) += pppox.o pptp.o
-
obj-$(CONFIG_SLIP) += slip.o
obj-$(CONFIG_SLHC) += slhc.o
@@ -159,6 +159,10 @@ config KORINA
source "drivers/net/ethernet/marvell/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
+
+config MDIO
+ tristate
+
source "drivers/net/ethernet/micrel/Kconfig"
source "drivers/net/ethernet/mips/Kconfig"
source "drivers/net/ethernet/motorola/Kconfig"
After the move of the Ethernet drivers into drivers/net/ethernet/ there was some leftover cleanup to do in the Kconfig and Makefile. Removed the 10/100, 1000, and 10GbE Kconfig menus. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> --- drivers/net/Kconfig | 113 ------------------------------------------ drivers/net/Makefile | 4 -- drivers/net/ethernet/Kconfig | 4 ++ 3 files changed, 4 insertions(+), 117 deletions(-)