From patchwork Thu Dec 27 18:12:54 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Cercueil X-Patchwork-Id: 1018951 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=crapouillou.net Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (1024-bit key; unprotected) header.d=crapouillou.net header.i=@crapouillou.net header.b="CJu07aRk"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 43QdJ7004vz9s7h for ; Fri, 28 Dec 2018 05:13:42 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726767AbeL0SNl (ORCPT ); Thu, 27 Dec 2018 13:13:41 -0500 Received: from outils.crapouillou.net ([89.234.176.41]:53708 "EHLO crapouillou.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726639AbeL0SNj (ORCPT ); Thu, 27 Dec 2018 13:13:39 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=crapouillou.net; s=mail; t=1545934415; h=from:from:sender:reply-to:subject:subject:date:date: message-id:message-id:to:to:cc:cc:mime-version:content-type: content-transfer-encoding:in-reply-to:in-reply-to: references:references; bh=lcvN6DqlkPK4kl7pSZIymNGUdQHcOA+AI9JVdyxWDGU=; b=CJu07aRk4FEbSkx1XIDhrxIXhsu1WD2bAfP6FeRRcto5Z/sRAA/p2o+OmlYVQjY/l/sZ14 Txbe9yqpb9vHDs52t0c11gX0uuy+LDkV/2d+4JUdyB84mWAzU8i0RlPlRau36i7pRgICgy oAzBxCs1LpM8P+7dQNlWBQTQP4Ftu24= From: Paul Cercueil To: Thierry Reding , Rob Herring , Mark Rutland , Daniel Lezcano , Thomas Gleixner , Ralf Baechle , Paul Burton , James Hogan , Jonathan Corbet , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-mips@vger.kernel.org, linux-doc@vger.kernel.org, linux-clk@vger.kernel.org, Paul Cercueil Subject: [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware Date: Thu, 27 Dec 2018 19:12:54 +0100 Message-Id: <20181227181319.31095-3-paul@crapouillou.net> In-Reply-To: <20181227181319.31095-1-paul@crapouillou.net> References: <20181227181319.31095-1-paul@crapouillou.net> Sender: linux-pwm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org Add a documentation file about the Timer/Counter Unit (TCU) present in the Ingenic JZ47xx SoCs. The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function hardware block. It features up to to eight channels, that can be used as counters, timers, or PWM. - JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all have eight channels. - JZ4725B introduced a separate channel, called Operating System Timer (OST). It is a 32-bit programmable timer. On JZ4770 and above, it is 64-bit. - Each one of the TCU channels has its own clock, which can be reparented to three different clocks (pclk, ext, rtc), gated, and reclocked, through their TCSR register. * The watchdog and OST hardware blocks also feature a TCSR register with the same format in their register space. * The TCU registers used to gate/ungate can also gate/ungate the watchdog and OST clocks. - Each TCU channel works in one of two modes: * mode TCU1: channels cannot work in sleep mode, but are easier to operate. * mode TCU2: channels can work in sleep mode, but the operation is a bit more complicated than with TCU1 channels. - The mode of each TCU channel depends on the SoC used: * On the oldest SoCs (up to JZ4740), all of the eight channels operate in TCU1 mode. * On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1. * On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the others operate as TCU1. - Each channel can generate an interrupt. Some channels share an interrupt line, some don't, and this changes between SoC versions: * on older SoCs (JZ4740 and below), channel 0 and channel 1 have their own interrupt line; channels 2-7 share the last interrupt line. * On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one interrupt line; the OST uses the last interrupt line. * on newer SoCs (JZ4750 and above), channel 5 has its own interrupt; channels 0-4 and (if eight channels) 6-7 all share one interrupt line; the OST uses the last interrupt line. Signed-off-by: Paul Cercueil --- Notes: v4: New patch in this series v5: Added information about number of channels, and improved documentation about channel modes v6: Add info about OST (can be 32-bit on older SoCs) v7: No change v8: No change v9: No change Documentation/mips/ingenic-tcu.txt | 60 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/mips/ingenic-tcu.txt diff --git a/Documentation/mips/ingenic-tcu.txt b/Documentation/mips/ingenic-tcu.txt new file mode 100644 index 000000000000..0ea35b2a46da --- /dev/null +++ b/Documentation/mips/ingenic-tcu.txt @@ -0,0 +1,60 @@ +Ingenic JZ47xx SoCs Timer/Counter Unit hardware +----------------------------------------------- + +The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function +hardware block. It features up to to eight channels, that can be used as +counters, timers, or PWM. + +- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all + have eight channels. + +- JZ4725B introduced a separate channel, called Operating System Timer + (OST). It is a 32-bit programmable timer. On JZ4770 and above, it is + 64-bit. + +- Each one of the TCU channels has its own clock, which can be reparented + to three different clocks (pclk, ext, rtc), gated, and reclocked, through + their TCSR register. + * The watchdog and OST hardware blocks also feature a TCSR register with + the same format in their register space. + * The TCU registers used to gate/ungate can also gate/ungate the watchdog + and OST clocks. + +- Each TCU channel works in one of two modes: + * mode TCU1: channels cannot work in sleep mode, but are easier to + operate. + * mode TCU2: channels can work in sleep mode, but the operation is a bit + more complicated than with TCU1 channels. + +- The mode of each TCU channel depends on the SoC used: + * On the oldest SoCs (up to JZ4740), all of the eight channels operate in + TCU1 mode. + * On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1. + * On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the + others operate as TCU1. + +- Each channel can generate an interrupt. Some channels share an interrupt + line, some don't, and this changes between SoC versions: + * on older SoCs (JZ4740 and below), channel 0 and channel 1 have their + own interrupt line; channels 2-7 share the last interrupt line. + * On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one + interrupt line; the OST uses the last interrupt line. + * on newer SoCs (JZ4750 and above), channel 5 has its own interrupt; + channels 0-4 and (if eight channels) 6-7 all share one interrupt line; + the OST uses the last interrupt line. + +Implementation +-------------- + +The functionalities of the TCU hardware are spread across multiple drivers: +- clocks/irq/timer: drivers/clocksource/ingenic-timer.c +- PWM: drivers/pwm/pwm-jz4740.c +- watchdog: drivers/watchdog/jz4740_wdt.c +- OST: drivers/clocksource/ingenic-ost.c + +Because various functionalities of the TCU that belong to different drivers +and frameworks can be controlled from the same registers, all of these +drivers access their registers through the same regmap. + +For more information regarding the devicetree bindings of the TCU drivers, +have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.