Patchwork [2/4] powerpc, mpc52xx: add a4m072 board support

login
register
mail settings
Submitter Heiko Schocher
Date June 22, 2011, 7:55 a.m.
Message ID <1308729311-15375-3-git-send-email-hs@denx.de>
Download mbox | patch
Permalink /patch/101403/
State Superseded
Delegated to: Anatolij Gustschin
Headers show

Comments

Heiko Schocher - June 22, 2011, 7:55 a.m.
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: devicetree-discuss@ozlabs.org
cc: Wolfgang Denk <wd@denx.de>
---
For this patchseries following patch is needed:

http://patchwork.ozlabs.org/patch/91919/

Grant? Do you have some comments on that patch?

 arch/powerpc/boot/dts/a4m072.dts             |  273 ++++++++++++++++++++++++++
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
 2 files changed, 274 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/a4m072.dts
Wolfram Sang - June 22, 2011, 8:09 a.m.
On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: devicetree-discuss@ozlabs.org
> cc: Wolfgang Denk <wd@denx.de>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?

Can you use the mpc5200-include?
Heiko Schocher - June 22, 2011, 8:13 a.m.
Hello Wolfram,

Wolfram Sang wrote:
> On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> cc: Grant Likely <grant.likely@secretlab.ca>
>> cc: devicetree-discuss@ozlabs.org
>> cc: Wolfgang Denk <wd@denx.de>
>> ---
>> For this patchseries following patch is needed:
>>
>> http://patchwork.ozlabs.org/patch/91919/
>>
>> Grant? Do you have some comments on that patch?
> 
> Can you use the mpc5200-include?

Sorry, cannot parse this ...

bye,
Heiko
Wolfram Sang - June 22, 2011, 8:25 a.m.
> >> Grant? Do you have some comments on that patch?
> > 
> > Can you use the mpc5200-include?
> 
> Sorry, cannot parse this ...

Check other mpc5200-boards, like pcm030:

/include/ "mpc5200b.dtsi"
Grant Likely - July 31, 2011, 4:05 a.m.
On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: devicetree-discuss@ozlabs.org
> cc: Wolfgang Denk <wd@denx.de>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?
> 
>  arch/powerpc/boot/dts/a4m072.dts             |  273 ++++++++++++++++++++++++++
>  arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
>  2 files changed, 274 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/a4m072.dts
> 
> diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
> new file mode 100644
> index 0000000..cea1c6f
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/a4m072.dts
> @@ -0,0 +1,273 @@
> +/*
> + * a4m072 board Device Tree Source
> + *
> + * Copyright (C) 2011 DENX Software Engineering GmbH
> + * Heiko Schocher <hs@denx.de>
> + *
> + * Copyright (C) 2007 Semihalf
> + * Marian Balakowicz <m8@semihalf.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	model = "anonymous,a4m072";
> +	compatible = "anonymous,a4m072";

anonymous?  This bears some description.

Also, 5200b boards can use the mpc5200b.dtsi include file.  This one
should too.

> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	interrupt-parent = <&mpc5200_pic>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		PowerPC,5200@0 {
> +			device_type = "cpu";
> +			reg = <0>;
> +			d-cache-line-size = <32>;
> +			i-cache-line-size = <32>;
> +			d-cache-size = <0x4000>;	// L1, 16K
> +			i-cache-size = <0x4000>;	// L1, 16K
> +			timebase-frequency = <0>; /* From boot loader */
> +			bus-frequency = <0>; /* From boot loader */
> +			clock-frequency = <0>; /* From boot loader */
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x04000000>;
> +	};
> +
> +	soc5200@f0000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "fsl,mpc5200b-immr";
> +		ranges = <0 0xf0000000 0x0000c000>;
> +		reg = <0xf0000000 0x00000100>;
> +		bus-frequency = <0>; /* From boot loader */
> +		system-frequency = <0>; /* From boot loader */
> +
> +		cdm@200 {
> +			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> +			reg = <0x200 0x38>;
> +			fsl,ext_48mhz_en = <0x0>;
> +			fsl,fd_enable = <0x01>;
> +			fsl,fd_counters = <0xbbbb>;
> +		};
> +
> +		mpc5200_pic: interrupt-controller@500 {
> +			// 5200 interrupts are encoded into two levels;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> +			reg = <0x500 0x80>;
> +		};
> +
> +		timer@600 {
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x600 0x80>;
> +			interrupts = <1 9 0>;
> +			fsl,has-wdt;
> +		};
> +
> +		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x630 0x10>;
> +			interrupts = <1 12 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x640 0x10>;
> +			interrupts = <1 13 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x650 0x10>;
> +			interrupts = <1 14 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		can@900 {
> +			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> +			interrupts = <2 17 0>;
> +			reg = <0x900 0x80>;
> +		};
> +
> +		can@980 {
> +			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> +			interrupts = <2 18 0>;
> +			reg = <0x980 0x80>;
> +		};
> +
> +		gpio_simple: gpio@b00 {
> +			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> +			reg = <0xb00 0x40>;
> +			interrupts = <1 7 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			fsl,port_config = <0x19051444>;
> +		};
> +
> +		gpio_wkup: gpio@c00 {
> +			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> +			reg = <0xc00 0x40>;
> +			interrupts = <1 8 0 0 3 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		usb@1000 {
> +			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> +			reg = <0x1000 0xff>;
> +			interrupts = <2 6 0>;
> +		};
> +
> +		dma-controller@1200 {
> +			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> +			reg = <0x1200 0x80>;
> +			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> +			              3 4 0  3 5 0  3 6 0  3 7 0
> +			              3 8 0  3 9 0  3 10 0  3 11 0
> +			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		};
> +
> +		xlb@1f00 {
> +			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> +			reg = <0x1f00 0x100>;
> +		};
> +
> +		psc@2000 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2000 0x100>;
> +			interrupts = <2 1 0>;
> +		};
> +
> +		psc@2200 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2200 0x100>;
> +			interrupts = <2 2 0>;
> +		};
> +
> +		psc@2400 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2400 0x100>;
> +			interrupts = <2 3 0>;
> +		};
> +
> +		psc@2c00 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2c00 0x100>;
> +			interrupts = <2 4 0>;
> +		};
> +
> +		ethernet@3000 {
> +			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> +			reg = <0x3000 0x400>;
> +			local-mac-address = [ 00 00 00 00 00 00 ];
> +			interrupts = <2 5 0>;
> +			phy-handle = <&phy0>;
> +		};
> +
> +		mdio@3000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> +			reg = <0x3000 0x400>;
> +			interrupts = <2 5 0>;
> +
> +			phy0: ethernet-phy@1f {
> +				reg = <0x1f>;
> +				interrupts = <1 2 0>; /* IRQ 2 active low */
> +			};
> +		};
> +
> +		ata@3a00 {
> +			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> +			reg = <0x3a00 0x100>;
> +			interrupts = <2 7 0>;
> +		};
> +
> +		i2c@3d40 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> +			reg = <0x3d40 0x40>;
> +			interrupts = <2 16 0>;
> +
> +			 hwmon@2e {
> +				compatible = "nsc,lm87";
> +				reg = <0x2e>;
> +			};
> +			 rtc@51 {
> +				compatible = "nxp,rtc8564";
> +				reg = <0x51>;
> +			};
> +		};
> +
> +		sram@8000 {
> +			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> +			reg = <0x8000 0x4000>;
> +		};
> +	};
> +
> +	localbus {
> +		compatible = "fsl,mpc5200b-lpb","simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0xfe000000 0x02000000
> +			  1 0 0x62000000 0x00400000
> +			  2 0 0x64000000 0x00200000
> +			  3 0 0x66000000 0x01000000
> +			  6 0 0x68000000 0x01000000
> +			  7 0 0x6a000000 0x00000004
> +			 >;
> +
> +		flash@0,0 {
> +			compatible = "cfi-flash";
> +			reg = <0 0 0x02000000>;
> +			bank-width = <2>;
> +			#size-cells = <1>;
> +			#address-cells = <1>;
> +		};
> +		sram0@1,0 {
> +			compatible = "mtd-ram";
> +			reg = <1 0x00000 0x00400000>;
> +			bank-width = <2>;
> +		};
> +	};
> +
> +	pci@f0000d00 {
> +		#interrupt-cells = <1>;
> +		#size-cells = <2>;
> +		#address-cells = <3>;
> +		device_type = "pci";
> +		compatible = "fsl,mpc5200-pci";
> +		reg = <0xf0000d00 0x100>;
> +		interrupt-map-mask = <0xf800 0 0 7>;
> +		interrupt-map = <
> +				 /* IDSEL 0x16 */
> +				 0xc000 0 0 1 &mpc5200_pic 1 3 3
> +				 0xc000 0 0 2 &mpc5200_pic 1 3 3
> +				 0xc000 0 0 3 &mpc5200_pic 1 3 3
> +				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
> +		clock-frequency = <0>; /* From boot loader */
> +		interrupts = <2 8 0 2 9 0 2 10 0>;
> +		bus-range = <0 0>;
> +		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
> +			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
> +			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
> +	};
> +};
> diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> index e36d6e2..192b4ff 100644
> --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
> +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
>  
>  /* list of the supported boards */
>  static const char *board[] __initdata = {
> +	"anonymous,a4m072",
>  	"intercontrol,digsy-mtc",
>  	"manroland,mucmc52",
>  	"manroland,uc101",
> -- 
> 1.7.5.4
>

Patch

diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
new file mode 100644
index 0000000..cea1c6f
--- /dev/null
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -0,0 +1,273 @@ 
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>; /* From boot loader */
+			bus-frequency = <0>; /* From boot loader */
+			clock-frequency = <0>; /* From boot loader */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+			fsl,ext_48mhz_en = <0x0>;
+			fsl,fd_enable = <0x01>;
+			fsl,fd_counters = <0xbbbb>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x80>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			fsl,port_config = <0x19051444>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;
+			interrupts = <2 5 0>;
+
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			 hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			 rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004
+			 >;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..192b4ff 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@  static void __init mpc5200_simple_setup_arch(void)
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anonymous,a4m072",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",