mbox series

[U-Boot,PULL] Please pull u-boot-imx: u-boot-imx-20181214

Message ID 47f84fa8-ca1d-162c-5ad7-00af3bf73c96@denx.de
State Changes Requested
Delegated to: Tom Rini
Headers show
Series [U-Boot,PULL] Please pull u-boot-imx: u-boot-imx-20181214 | expand

Pull-request

git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214

Message

Stefano Babic Dec. 14, 2018, 1:39 p.m. UTC 
Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:

  Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
19:02:01 -0500)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214

for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:

  pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
+0100)

----------------------------------------------------------------
imx for 2019.01

- introduce support for i.MX8M
- fix size limit for Vhybrid / pico boards
- several board fixes
- w1 driver for MX2x / MX5x

----------------------------------------------------------------
Denis Zalevskiy (6):
      board: ge: Remove EEPROM bus param from read_vpd()
      board: ge: Move VPD EEPROM configuration to the defconfig
      bootcount: i2c: Add bus switching to the I2C bootcount driver
      bootcount: Configure length limit for I2C bootcount
      board: ge: Move VPD reading to the vpd_reader
      board: ge: Store bootcount in EEPROM on PPD and Bx50v3

Fabien Lahoudere (1):
      embestmx6boards: Add SPL support

Fabio Estevam (1):
      pico-imx7d: Increase the CONFIG_ENV_OFFSET size

Gary Bisson (2):
      imx: mx8m: add memory mapping for CAAM and TCM
      imx: bootaux: fix stack and pc assignment on 64-bit platforms

Harald Seiler (1):
      pcm058: fix NAND flash not using badblock table

Lukasz Majewski (3):
      ARM: vybrid: Provide pinctrl driver for Vybrid (vf610)
      ARM: DTS: Add iomux node to vf.dtsi for Vybrid devices
      ARM: DTS: Provide pinfunc definitions for vybrid vf610 from Linux
kernel

Martin Fuzzey (1):
      w1: Add driver for i.MX bus master controller

Martin Husemann (1):
      tools: improve portability of imx_cntr_image.sh

Michael Heimpold (4):
      configs: mx23_olinuxino_defconfig: fix status led definition
      configs: mx23_olinuxino_defconfig: disable bootefi command
      doc: imx: fix typo in imximage.txt
      doc: imx: fix typos in mxsimage.txt

Parthiban Nallathambi (1):
      imx: hab: extend hab_auth_img to calculate ivt_offset

Peng Fan (20):
      imx: imx8qxp_mek: imximage: remove config.h
      spl: introduce function prototypes
      firmware: psci: introduce SPL_ARM_PSCI_FW
      tools: add i.MX8M image support
      arm: imx8qxp: build u-boot-dtb.cfgout before checking files
      Introduce CONFIG_FIT_EXTERNAL_OFFSET
      imx: cpu: add CHIP_REV_2_1 macro
      imx: introduce is_imx8mq helper
      imx: rename mx8m,MX8M to imx8m,IMX8M
      imx: spl: add MMC BOOT Device for i.MX8M
      imx: imx8m: clock refactor dram pll part
      imx: imx8m: introduce script to generate fit image
      imx: imx8m: introduce imximage cfg file
      imx: imx8mq: build flash.bin
      imx: imx8m: not build bootaux when building SPL
      imx: imx8m: add lpddr4 header file
      drivers: ddr: introduce DDR driver for i.MX8M
      imx: add i.MX8MQ EVK support
      imx8m: ddr: removed unused macros
      imx: mx53ppd: fix build error

Pierre-Jean Texier (1):
      warp7: configs: add CONFIG_FIT option

Wolfgang Denk (1):
      Enable expression support for CONFIG_BOARD_SIZE_LIMIT

Xiaoliang Yang (2):
      watchdog: driver support for fsl-lsch2
      watchdog: imx: add config to disable wdog reset

Yaniv Levinsky (1):
      arm: imx7d: cl-som-imx7: migration to CONFIG_BLK

Ye Li (2):
      SPL: Add HAB image authentication to FIT
      imx8m: Enable CONFIG_SPL_FIT_IMAGE_TINY for iMX8M

 Kconfig
   |   10 +
 Makefile
   |   24 +-
 arch/arm/Kconfig
   |    4 +-
 arch/arm/Makefile
   |    4 +-
 arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
   |   11 +
 arch/arm/dts/Makefile
   |    2 +
 arch/arm/dts/fsl-imx8mq-evk.dts
   |  414 ++++++++++++++++++++++++++++++++++
 arch/arm/dts/vf.dtsi
   |    6 +
 arch/arm/dts/vf610-pinfunc.h
   |  810 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-imx/cpu.h
   |    5 +-
 arch/arm/include/asm/{arch-mx8m => arch-imx8m}/clock.h
   |   22 ++
 arch/arm/include/asm/{arch-mx8m => arch-imx8m}/crm_regs.h
   |    4 +-
 arch/arm/include/asm/arch-imx8m/ddr.h
   |  740 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/{arch-mx8m => arch-imx8m}/gpio.h
   |    4 +-
 arch/arm/include/asm/{arch-mx8m => arch-imx8m}/imx-regs.h
   |    4 +-
 arch/arm/include/asm/{arch-mx8m/mx8mq_pins.h =>
arch-imx8m/imx8mq_pins.h} |    4 +-
 arch/arm/include/asm/arch-imx8m/lpddr4_define.h
   |   97 ++++++++
 arch/arm/include/asm/{arch-mx8m => arch-imx8m}/sys_proto.h
   |    4 +-
 arch/arm/include/asm/arch-mx8m/ddr.h
   |  355 -----------------------------
 arch/arm/include/asm/mach-imx/iomux-v3.h
   |    2 +-
 arch/arm/include/asm/mach-imx/regs-lcdif.h
   |    6 +-
 arch/arm/include/asm/mach-imx/sys_proto.h
   |    3 +-
 arch/arm/mach-imx/Makefile
   |   54 +++--
 arch/arm/mach-imx/cpu.c
   |   16 +-
 arch/arm/mach-imx/hab.c
   |   29 ++-
 arch/arm/mach-imx/imx8m/Kconfig
   |   23 ++
 arch/arm/mach-imx/{mx8m => imx8m}/Makefile
   |    0
 arch/arm/mach-imx/{mx8m => imx8m}/clock.c
   |  138 +++++++++---
 arch/arm/mach-imx/{mx8m => imx8m}/clock_slice.c
   |    0
 arch/arm/mach-imx/imx8m/imximage.cfg
   |   17 ++
 arch/arm/mach-imx/{mx8m => imx8m}/lowlevel_init.S
   |    0
 arch/arm/mach-imx/{mx8m => imx8m}/soc.c
   |   16 ++
 arch/arm/mach-imx/imx_bootaux.c
   |    8 +-
 arch/arm/mach-imx/mkimage_fit_atf.sh
   |  137 ++++++++++++
 arch/arm/mach-imx/mx6/Kconfig
   |    1 +
 arch/arm/mach-imx/mx8m/Kconfig
   |   10 -
 arch/arm/mach-imx/spl.c
   |   59 ++++-
 board/embest/mx6boards/mx6boards.c
   |   48 ++++
 board/freescale/imx8mq_evk/Kconfig
   |   12 +
 board/freescale/imx8mq_evk/MAINTAINERS
   |    6 +
 board/freescale/imx8mq_evk/Makefile
   |   12 +
 board/freescale/imx8mq_evk/README
   |   36 +++
 board/freescale/imx8mq_evk/imx8mq_evk.c
   |  130 +++++++++++
 board/freescale/imx8mq_evk/lpddr4_timing.c
   | 1320
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/imx8mq_evk/lpddr4_timing_b0.c
   | 1191
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/freescale/imx8mq_evk/spl.c
   |  246 ++++++++++++++++++++
 board/freescale/imx8qxp_mek/imximage.cfg
   |    1 -
 board/ge/bx50v3/Kconfig
   |    2 +
 board/ge/bx50v3/bx50v3.c
   |   57 +----
 board/ge/common/Kconfig
   |   14 ++
 board/ge/common/vpd_reader.c
   |   57 ++++-
 board/ge/common/vpd_reader.h
   |   16 +-
 board/ge/mx53ppd/Kconfig
   |    2 +
 board/ge/mx53ppd/mx53ppd.c
   |   50 +----
 common/image.c
   |    1 +
 common/spl/Kconfig
   |    1 +
 common/spl/spl_fit.c
   |   21 +-
 configs/cl-som-imx7_defconfig
   |    6 +-
 configs/ge_bx50v3_defconfig
   |   27 ++-
 configs/imx8mq_evk_defconfig
   |   37 +++
 configs/mx23_olinuxino_defconfig
   |    3 +-
 configs/mx53ppd_defconfig
   |   29 ++-
 configs/riotboard_spl_defconfig
   |   48 ++++
 configs/warp7_defconfig
   |    2 +
 doc/device-tree-bindings/w1/mxc-w1.txt
   |   37 +++
 doc/imx/mkimage/imximage.txt
   |    2 +-
 doc/imx/mkimage/mxsimage.txt
   |    4 +-
 drivers/Makefile
   |    1 +
 drivers/bootcount/Kconfig
   |   21 +-
 drivers/bootcount/bootcount_i2c.c
   |   79 ++++++-
 drivers/ddr/Kconfig
   |    1 +
 drivers/ddr/imx/Kconfig
   |    1 +
 drivers/ddr/imx/imx8m/Kconfig
   |   22 ++
 drivers/ddr/imx/imx8m/Makefile
   |   11 +
 drivers/ddr/imx/imx8m/ddr4_init.c
   |  113 ++++++++++
 drivers/ddr/imx/imx8m/ddrphy_csr.c
   |  732 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/ddr/imx/imx8m/ddrphy_train.c
   |   86 +++++++
 drivers/ddr/imx/imx8m/ddrphy_utils.c
   |  186 +++++++++++++++
 drivers/ddr/imx/imx8m/helper.c
   |  170 ++++++++++++++
 drivers/ddr/imx/imx8m/lpddr4_init.c
   |  188 ++++++++++++++++
 drivers/firmware/Kconfig
   |    4 +
 drivers/firmware/Makefile
   |    2 +-
 drivers/gpio/mxc_gpio.c
   |   18 +-
 drivers/misc/mxc_ocotp.c
   |    6 +-
 drivers/mmc/fsl_esdhc.c
   |    8 +-
 drivers/net/fec_mxc.c
   |    2 +-
 drivers/pinctrl/nxp/Kconfig
   |   14 ++
 drivers/pinctrl/nxp/Makefile
   |    1 +
 drivers/pinctrl/nxp/pinctrl-vf610.c
   |   40 ++++
 drivers/w1/Kconfig
   |   14 ++
 drivers/w1/Makefile
   |    1 +
 drivers/w1/mxc_w1.c
   |  232 +++++++++++++++++++
 drivers/watchdog/Kconfig
   |    6 +
 drivers/watchdog/Makefile
   |    2 +
 drivers/watchdog/imx_watchdog.c
   |    9 +
 include/configs/embestmx6boards.h
   |   13 ++
 include/configs/ge_bx50v3.h
   |    6 +-
 include/configs/imx8mq_evk.h
   |  252 +++++++++++++++++++++
 include/configs/mx53ppd.h
   |    6 +-
 include/configs/pcm058.h
   |    1 +
 include/configs/pico-imx7d.h
   |    3 +-
 include/image.h
   |    1 +
 include/imximage.h
   |   17 +-
 include/spl.h
   |   13 ++
 tools/Makefile
   |    1 +
 tools/imagetool.h
   |    1 +
 tools/imx8m_image.sh
   |   43 ++++
 tools/imx8mimage.c
   |  623 +++++++++++++++++++++++++++++++++++++++++++++++++++
 tools/imx_cntr_image.sh
   |    2 +-
 tools/mkimage.c
   |    7 +
 110 files changed, 8812 insertions(+), 608 deletions(-)
 create mode 100644 arch/arm/dts/fsl-imx8mq-evk.dts
 create mode 100644 arch/arm/dts/vf610-pinfunc.h
 rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/clock.h (97%)
 rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/crm_regs.h (65%)
 create mode 100644 arch/arm/include/asm/arch-imx8m/ddr.h
 rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/gpio.h (63%)
 rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/imx-regs.h (99%)
 rename arch/arm/include/asm/{arch-mx8m/mx8mq_pins.h =>
arch-imx8m/imx8mq_pins.h} (99%)
 create mode 100644 arch/arm/include/asm/arch-imx8m/lpddr4_define.h
 rename arch/arm/include/asm/{arch-mx8m => arch-imx8m}/sys_proto.h (82%)
 delete mode 100644 arch/arm/include/asm/arch-mx8m/ddr.h
 create mode 100644 arch/arm/mach-imx/imx8m/Kconfig
 rename arch/arm/mach-imx/{mx8m => imx8m}/Makefile (100%)
 rename arch/arm/mach-imx/{mx8m => imx8m}/clock.c (85%)
 rename arch/arm/mach-imx/{mx8m => imx8m}/clock_slice.c (100%)
 create mode 100644 arch/arm/mach-imx/imx8m/imximage.cfg
 rename arch/arm/mach-imx/{mx8m => imx8m}/lowlevel_init.S (100%)
 rename arch/arm/mach-imx/{mx8m => imx8m}/soc.c (92%)
 create mode 100755 arch/arm/mach-imx/mkimage_fit_atf.sh
 delete mode 100644 arch/arm/mach-imx/mx8m/Kconfig
 create mode 100644 board/freescale/imx8mq_evk/Kconfig
 create mode 100644 board/freescale/imx8mq_evk/MAINTAINERS
 create mode 100644 board/freescale/imx8mq_evk/Makefile
 create mode 100644 board/freescale/imx8mq_evk/README
 create mode 100644 board/freescale/imx8mq_evk/imx8mq_evk.c
 create mode 100644 board/freescale/imx8mq_evk/lpddr4_timing.c
 create mode 100644 board/freescale/imx8mq_evk/lpddr4_timing_b0.c
 create mode 100644 board/freescale/imx8mq_evk/spl.c
 create mode 100644 board/ge/common/Kconfig
 create mode 100644 configs/imx8mq_evk_defconfig
 create mode 100644 configs/riotboard_spl_defconfig
 create mode 100644 doc/device-tree-bindings/w1/mxc-w1.txt
 create mode 100644 drivers/ddr/imx/Kconfig
 create mode 100644 drivers/ddr/imx/imx8m/Kconfig
 create mode 100644 drivers/ddr/imx/imx8m/Makefile
 create mode 100644 drivers/ddr/imx/imx8m/ddr4_init.c
 create mode 100644 drivers/ddr/imx/imx8m/ddrphy_csr.c
 create mode 100644 drivers/ddr/imx/imx8m/ddrphy_train.c
 create mode 100644 drivers/ddr/imx/imx8m/ddrphy_utils.c
 create mode 100644 drivers/ddr/imx/imx8m/helper.c
 create mode 100644 drivers/ddr/imx/imx8m/lpddr4_init.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-vf610.c
 create mode 100644 drivers/w1/mxc_w1.c
 create mode 100644 include/configs/imx8mq_evk.h
 create mode 100755 tools/imx8m_image.sh
 create mode 100644 tools/imx8mimage.c

Comments

Tom Rini Dec. 14, 2018, 6:37 p.m. UTC | #1 
On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
> 19:02:01 -0500)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
> 
> for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
> 
>   pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
> +0100)
> 

NAK.  You're failing the "no new defconfigs without MAINTAINERS" test in
Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975

Also, Wolfgang's patch is breaking
guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
in my specific Debian chroot and I need to dig in more to provide
something useful there other than "it fails".  So please drop that for
now too.  Thanks!
Stefano Babic Dec. 14, 2018, 10:03 p.m. UTC | #2 
On 14/12/18 19:37, Tom Rini wrote:
> On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
> 
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>>
>> The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
>>
>>   Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
>> 19:02:01 -0500)
>>
>> are available in the Git repository at:
>>
>>   git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
>>
>> for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
>>
>>   pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
>> +0100)
>>
> 
> NAK.  You're failing the "no new defconfigs without MAINTAINERS" test in
> Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
> 

I see, I'll ix it.

> Also, Wolfgang's patch is breaking
> guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
> in my specific Debian chroot and I need to dig in more to provide
> something useful there other than "it fails".  So please drop that for
> now too. 

I do, I put Fabio's pico-7d in wait queue as this depends on Wolfgang's

Regards,
Stefano
Tom Rini Dec. 14, 2018, 10:06 p.m. UTC | #3 
On Fri, Dec 14, 2018 at 11:03:59PM +0100, Stefano Babic wrote:
> 
> 
> On 14/12/18 19:37, Tom Rini wrote:
> > On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
> > 
> >> Hi Tom,
> >>
> >> please pull from u-boot-imx, thanks !
> >>
> >>
> >> The following changes since commit c49aff3e66b930aa06936afee401cf5e19377958:
> >>
> >>   Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-12-07
> >> 19:02:01 -0500)
> >>
> >> are available in the Git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
> >>
> >> for you to fetch changes up to 5d0f0b567c78197db6f2f47c89a18b44ade28284:
> >>
> >>   pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14 14:30:57
> >> +0100)
> >>
> > 
> > NAK.  You're failing the "no new defconfigs without MAINTAINERS" test in
> > Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
> > 
> 
> I see, I'll ix it.
> 
> > Also, Wolfgang's patch is breaking
> > guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
> > in my specific Debian chroot and I need to dig in more to provide
> > something useful there other than "it fails".  So please drop that for
> > now too. 
> 
> I do, I put Fabio's pico-7d in wait queue as this depends on Wolfgang's

I replied to Wolfgang's patch with the problem and I suggest that
pico-7d simply stop using >> as it's not going to work once we Kconfig
migrate anyhow.
Fabio Estevam Dec. 14, 2018, 10:09 p.m. UTC | #4 
Hi Tom,

On Fri, Dec 14, 2018 at 8:06 PM Tom Rini <trini@konsulko.com> wrote:

> I replied to Wolfgang's patch with the problem and I suggest that
> pico-7d simply stop using >> as it's not going to work once we Kconfig
> migrate anyhow.

pico-imx7d does not use >>.

I sent 5 different versions of this patch and the initial ones do not
depend on Wolfgang's patch, as I hardcoded the offset.
Tom Rini Dec. 14, 2018, 10:10 p.m. UTC | #5 
On Fri, Dec 14, 2018 at 08:09:18PM -0200, Fabio Estevam wrote:
> Hi Tom,
> 
> On Fri, Dec 14, 2018 at 8:06 PM Tom Rini <trini@konsulko.com> wrote:
> 
> > I replied to Wolfgang's patch with the problem and I suggest that
> > pico-7d simply stop using >> as it's not going to work once we Kconfig
> > migrate anyhow.
> 
> pico-imx7d does not use >>.
> 
> I sent 5 different versions of this patch and the initial ones do not
> depend on Wolfgang's patch, as I hardcoded the offset.

OK, thanks.
Lukasz Majewski Dec. 16, 2018, 9:12 p.m. UTC | #6 
Dear Stefano,

> On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
> 
> > Hi Tom,
> > 
> > please pull from u-boot-imx, thanks !
> > 
> > 
> > The following changes since commit
> > c49aff3e66b930aa06936afee401cf5e19377958:
> > 
> >   Merge branch 'master' of git://git.denx.de/u-boot-sunxi
> > (2018-12-07 19:02:01 -0500)
> > 
> > are available in the Git repository at:
> > 
> >   git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
> > 
> > for you to fetch changes up to
> > 5d0f0b567c78197db6f2f47c89a18b44ade28284:
> > 
> >   pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14
> > 14:30:57 +0100)
> >   
> 
> NAK.  You're failing the "no new defconfigs without MAINTAINERS" test
> in Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
> 
> Also, Wolfgang's patch is breaking
> guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
> in my specific Debian chroot and I need to dig in more to provide
> something useful there other than "it fails".  So please drop that for
> now too.  Thanks!
> 

As this PR is not accepted; Stefano, could you also pull following
changes (relevant for vybrid):

http://patchwork.ozlabs.org/patch/1006731/
http://patchwork.ozlabs.org/patch/1006732/
http://patchwork.ozlabs.org/patch/1006733/

One of it:
"nand: vybrid: Use calloc() instead of malloc() to allocate struct nfc"
is a fix.

The other two just add support for Vybrid's NFC controller in device
tree. There shall be no issues with this code for in-tree boards.

Thanks in advance and sorry for a late reply to this thread.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Stefano Babic Dec. 17, 2018, 9:53 a.m. UTC | #7 
On 16/12/18 22:12, Lukasz Majewski wrote:
> Dear Stefano,
> 
>> On Fri, Dec 14, 2018 at 02:39:04PM +0100, Stefano Babic wrote:
>>
>>> Hi Tom,
>>>
>>> please pull from u-boot-imx, thanks !
>>>
>>>
>>> The following changes since commit
>>> c49aff3e66b930aa06936afee401cf5e19377958:
>>>
>>>   Merge branch 'master' of git://git.denx.de/u-boot-sunxi
>>> (2018-12-07 19:02:01 -0500)
>>>
>>> are available in the Git repository at:
>>>
>>>   git://www.denx.de/git/u-boot-imx.git tags/u-boot-imx-20181214
>>>
>>> for you to fetch changes up to
>>> 5d0f0b567c78197db6f2f47c89a18b44ade28284:
>>>
>>>   pico-imx7d: Increase the CONFIG_ENV_OFFSET size (2018-12-14
>>> 14:30:57 +0100)
>>>   
>>
>> NAK.  You're failing the "no new defconfigs without MAINTAINERS" test
>> in Travis: https://travis-ci.org/trini/u-boot/jobs/468004873#L975
>>
>> Also, Wolfgang's patch is breaking
>> guruplug,sheevaplug,linkit-smart-7688-ram,colibri_pxa270,linkit-smart-7688,gardena-smart-gateway-mt7688-ram,gardena-smart-gateway-mt7688
>> in my specific Debian chroot and I need to dig in more to provide
>> something useful there other than "it fails".  So please drop that for
>> now too.  Thanks!
>>
> 
> As this PR is not accepted; Stefano, could you also pull following
> changes (relevant for vybrid):
> 
> http://patchwork.ozlabs.org/patch/1006731/
> http://patchwork.ozlabs.org/patch/1006732/
> http://patchwork.ozlabs.org/patch/1006733/
> 
> One of it:
> "nand: vybrid: Use calloc() instead of malloc() to allocate struct nfc"
> is a fix.
> 
> The other two just add support for Vybrid's NFC controller in device
> tree. There shall be no issues with this code for in-tree boards.
> 
> Thanks in advance and sorry for a late reply to this thread.
> 

I have picked up the 3 patches, my build is running..

Best regards,
Stefano