| Message ID | 1544760624-12874-2-git-send-email-tdas@codeaurora.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | cpufreq: qcom-hw: Add support for QCOM cpufreq HW | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
Quoting Taniya Das (2018-12-13 20:10:23) > Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's > SoCs. This is required for managing the cpu frequency transitions which are > controlled by the hardware engine. > > Signed-off-by: Taniya Das <tdas@codeaurora.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org> except one question below for Rob. > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > new file mode 100644 > index 0000000..33856947 > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > @@ -0,0 +1,172 @@ > +Qualcomm Technologies, Inc. CPUFREQ Bindings > + > +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) > +SoCs to manage frequency in hardware. It is capable of controlling frequency > +for multiple clusters. > + > +Properties: > +- compatible > + Usage: required > + Value type: <string> > + Definition: must be "qcom,cpufreq-hw". > + > +- clocks > + Usage: required > + Value type: <phandle> From common clock binding. > + Definition: clock handle for XO clock and GPLL0 clock. > + > +- clock-names > + Usage: required > + Value type: <string> From common clock binding. > + Definition: must be "xo", "alternate". > + > +- reg > + Usage: required > + Value type: <prop-encoded-array> > + Definition: Addresses and sizes for the memory of the HW bases in > + each frequency domain. > +- reg-names > + Usage: Optional > + Value type: <string> > + Definition: Frequency domain name i.e. > + "freq-domain0", "freq-domain1". > + > +- #freq-domain-cells: I still wonder if this should be #qcom,freq-domain-cells, but if Rob is OK I won't complain. > + Usage: required. Nitpick: Weird full-stop here ^ > + Definition: Number of cells in a freqency domain specifier. > + > +* Property qcom,freq-domain > +Devices supporting freq-domain must set their "qcom,freq-domain" property with > +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. > + > +
On Fri, Dec 14, 2018 at 9:40 AM Taniya Das <tdas@codeaurora.org> wrote: > > Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's > SoCs. This is required for managing the cpu frequency transitions which are > controlled by the hardware engine. > > Signed-off-by: Taniya Das <tdas@codeaurora.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > .../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 +++++++++++++++++++++ > 1 file changed, 172 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > new file mode 100644 > index 0000000..33856947 > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > @@ -0,0 +1,172 @@ > +Qualcomm Technologies, Inc. CPUFREQ Bindings > + > +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) > +SoCs to manage frequency in hardware. It is capable of controlling frequency > +for multiple clusters. > + > +Properties: > +- compatible > + Usage: required > + Value type: <string> > + Definition: must be "qcom,cpufreq-hw". > + > +- clocks > + Usage: required > + Value type: <phandle> From common clock binding. > + Definition: clock handle for XO clock and GPLL0 clock. > + > +- clock-names > + Usage: required > + Value type: <string> From common clock binding. > + Definition: must be "xo", "alternate". > + > +- reg > + Usage: required > + Value type: <prop-encoded-array> > + Definition: Addresses and sizes for the memory of the HW bases in > + each frequency domain. > +- reg-names > + Usage: Optional > + Value type: <string> > + Definition: Frequency domain name i.e. > + "freq-domain0", "freq-domain1". > + > +- #freq-domain-cells: > + Usage: required. > + Definition: Number of cells in a freqency domain specifier. > + > +* Property qcom,freq-domain > +Devices supporting freq-domain must set their "qcom,freq-domain" property with > +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. > + > + > +Example: > + > +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch > +DCVS state together. > + > +/ { > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_0: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + L3_0: l3-cache { > + compatible = "cache"; > + }; > + }; > + }; > + > + CPU1: cpu@100 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x100>; > + enable-method = "psci"; > + next-level-cache = <&L2_100>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_100: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU2: cpu@200 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x200>; > + enable-method = "psci"; > + next-level-cache = <&L2_200>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_200: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU3: cpu@300 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x300>; > + enable-method = "psci"; > + next-level-cache = <&L2_300>; > + qcom,freq-domain = <&cpufreq_hw 0>; > + L2_300: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU4: cpu@400 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x400>; > + enable-method = "psci"; > + next-level-cache = <&L2_400>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_400: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU5: cpu@500 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x500>; > + enable-method = "psci"; > + next-level-cache = <&L2_500>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_500: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU6: cpu@600 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x600>; > + enable-method = "psci"; > + next-level-cache = <&L2_600>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_600: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + > + CPU7: cpu@700 { > + device_type = "cpu"; > + compatible = "qcom,kryo385"; > + reg = <0x0 0x700>; > + enable-method = "psci"; > + next-level-cache = <&L2_700>; > + qcom,freq-domain = <&cpufreq_hw 1>; > + L2_700: l2-cache { > + compatible = "cache"; > + next-level-cache = <&L3_0>; > + }; > + }; > + }; > + > + soc { > + cpufreq_hw: cpufreq@17d43000 { > + compatible = "qcom,cpufreq-hw"; > + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; > + reg-names = "freq-domain0", "freq-domain1"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; > + clock-names = "xo", "alternate"; > + > + #freq-domain-cells = <1>; > + }; > +} > -- > Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member > of the Code Aurora Forum, hosted by the Linux Foundation. >
On Thu, Dec 13, 2018 at 09:32:59PM -0800, Stephen Boyd wrote: > Quoting Taniya Das (2018-12-13 20:10:23) > > Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's > > SoCs. This is required for managing the cpu frequency transitions which are > > controlled by the hardware engine. > > > > Signed-off-by: Taniya Das <tdas@codeaurora.org> > > --- > > Reviewed-by: Stephen Boyd <swboyd@chromium.org> > > except one question below for Rob. > > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > > new file mode 100644 > > index 0000000..33856947 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > > @@ -0,0 +1,172 @@ > > +Qualcomm Technologies, Inc. CPUFREQ Bindings > > + > > +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) > > +SoCs to manage frequency in hardware. It is capable of controlling frequency > > +for multiple clusters. > > + > > +Properties: > > +- compatible > > + Usage: required > > + Value type: <string> > > + Definition: must be "qcom,cpufreq-hw". > > + > > +- clocks > > + Usage: required > > + Value type: <phandle> From common clock binding. > > + Definition: clock handle for XO clock and GPLL0 clock. > > + > > +- clock-names > > + Usage: required > > + Value type: <string> From common clock binding. > > + Definition: must be "xo", "alternate". > > + > > +- reg > > + Usage: required > > + Value type: <prop-encoded-array> > > + Definition: Addresses and sizes for the memory of the HW bases in > > + each frequency domain. > > +- reg-names > > + Usage: Optional > > + Value type: <string> > > + Definition: Frequency domain name i.e. > > + "freq-domain0", "freq-domain1". > > + > > +- #freq-domain-cells: > > I still wonder if this should be #qcom,freq-domain-cells, but if Rob is > OK I won't complain. Probably should be. Though I did give my R-by without. Rob
On Fri, 14 Dec 2018 09:40:23 +0530, Taniya Das wrote: > Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's > SoCs. This is required for managing the cpu frequency transitions which are > controlled by the hardware engine. > > Signed-off-by: Taniya Das <tdas@codeaurora.org> > --- > .../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 +++++++++++++++++++++ > 1 file changed, 172 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt new file mode 100644 index 0000000..33856947 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt @@ -0,0 +1,172 @@ +Qualcomm Technologies, Inc. CPUFREQ Bindings + +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) +SoCs to manage frequency in hardware. It is capable of controlling frequency +for multiple clusters. + +Properties: +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,cpufreq-hw". + +- clocks + Usage: required + Value type: <phandle> From common clock binding. + Definition: clock handle for XO clock and GPLL0 clock. + +- clock-names + Usage: required + Value type: <string> From common clock binding. + Definition: must be "xo", "alternate". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: Addresses and sizes for the memory of the HW bases in + each frequency domain. +- reg-names + Usage: Optional + Value type: <string> + Definition: Frequency domain name i.e. + "freq-domain0", "freq-domain1". + +- #freq-domain-cells: + Usage: required. + Definition: Number of cells in a freqency domain specifier. + +* Property qcom,freq-domain +Devices supporting freq-domain must set their "qcom,freq-domain" property with +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. + + +Example: + +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch +DCVS state together. + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + soc { + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; +}
Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's SoCs. This is required for managing the cpu frequency transitions which are controlled by the hardware engine. Signed-off-by: Taniya Das <tdas@codeaurora.org> --- .../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 +++++++++++++++++++++ 1 file changed, 172 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt -- Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.