From patchwork Mon Jun 20 16:48:42 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [6/6] ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internal Date: Mon, 20 Jun 2011 06:48:42 -0000 From: Fabio Estevam X-Patchwork-Id: 101152 Message-Id: <1308588522-16586-6-git-send-email-fabio.estevam@freescale.com> To: Cc: Fabio Estevam , kernel@pengutronix.de On the i.MX SPI driver the chipselect pins can be of the following types: - internal: when the chipselect pin is used as a dedicated CS pin of the CSPI controller - GPIO: a generic GPIO can be used as a chipselect funtion On the mx27_3ds the SPI2 chip select is a GPIO, so don't annotate 'internal' in the chip select definition. Signed-off-by: Fabio Estevam --- arch/arm/mach-imx/mach-mx27_3ds.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 5502611..5921aae 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -300,11 +300,11 @@ static const struct spi_imx_master spi1_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi1_chipselect), }; -static int spi2_internal_chipselect[] = {SPI2_SS0}; +static int spi2_chipselect[] = {SPI2_SS0}; static const struct spi_imx_master spi2_pdata __initconst = { - .chipselect = spi2_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect), + .chipselect = spi2_chipselect, + .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; static struct imx_fb_videomode mx27_3ds_modes[] = {