| Message ID | 1544481988-30032-4-git-send-email-ynezz@true.cz |
|---|---|
| State | Changes Requested |
| Delegated to: | Mathias Kresin |
| Headers | show |
| Series | ath79: Add support for Ubiquiti Nanostation M (XW) | expand |
10/12/2018 23:46, Petr Štetiar: > In ar71xx/mach-ubnt-xm.c there's following code: > > static void __init ubnt_xw_init(void) { > ... > ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); > ... > } > > But I couldn't find a way how to set it up via DTS. Would you please add an explanation to the commit message what the devicetree property does and why we might need it. Mathias > > Tested-by: Joe Ayers <ae6xe@arrl.net> > Signed-off-by: Petr Štetiar <ynezz@true.cz> > --- > .../linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c > index e69abb6..cc0a15d 100644 > --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c > +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c > @@ -53,6 +53,7 @@ static void ag71xx_setup_gmac_934x(struct device_node *np, void __iomem *base) > > ag71xx_of_bit(np, "rgmii-gmac0", &val, AR934X_ETH_CFG_RGMII_GMAC0); > ag71xx_of_bit(np, "mii-gmac0", &val, AR934X_ETH_CFG_MII_GMAC0); > + ag71xx_of_bit(np, "mii-gmac0-slave", &val, AR934X_ETH_CFG_MII_GMAC0_SLAVE); > ag71xx_of_bit(np, "gmii-gmac0", &val, AR934X_ETH_CFG_GMII_GMAC0); > ag71xx_of_bit(np, "switch-phy-swap", &val, AR934X_ETH_CFG_SW_PHY_SWAP); > ag71xx_of_bit(np, "switch-only-mode", &val, >
diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c index e69abb6..cc0a15d 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c @@ -53,6 +53,7 @@ static void ag71xx_setup_gmac_934x(struct device_node *np, void __iomem *base) ag71xx_of_bit(np, "rgmii-gmac0", &val, AR934X_ETH_CFG_RGMII_GMAC0); ag71xx_of_bit(np, "mii-gmac0", &val, AR934X_ETH_CFG_MII_GMAC0); + ag71xx_of_bit(np, "mii-gmac0-slave", &val, AR934X_ETH_CFG_MII_GMAC0_SLAVE); ag71xx_of_bit(np, "gmii-gmac0", &val, AR934X_ETH_CFG_GMII_GMAC0); ag71xx_of_bit(np, "switch-phy-swap", &val, AR934X_ETH_CFG_SW_PHY_SWAP); ag71xx_of_bit(np, "switch-only-mode", &val,
In ar71xx/mach-ubnt-xm.c there's following code: static void __init ubnt_xw_init(void) { ... ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); ... } But I couldn't find a way how to set it up via DTS. Tested-by: Joe Ayers <ae6xe@arrl.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> --- .../linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c | 1 + 1 file changed, 1 insertion(+)