Patchwork [V3,05/11] fec_mpc52xx: enable transmit and receive time stamping.

login
register
mail settings
Submitter Richard Cochran
Date June 20, 2011, 7:51 a.m.
Message ID <39e579cfbe58b483ac76b9a1cb050834d769a2bf.1308556146.git.richard.cochran@omicron.at>
Download mbox | patch
Permalink /patch/101047/
State Accepted
Delegated to: David Miller
Headers show

Comments

Richard Cochran - June 20, 2011, 7:51 a.m.
This patch enables software (and phy device) time stamping. Software
time stamping using the SO_TIMESTAMPING API was tested and found to be
working on the LITE5200B board.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
---
 drivers/net/fec_mpc52xx.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

Patch

diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 9f81b1a..a4dd6a4 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -335,6 +335,7 @@  static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	bd->skb_pa = dma_map_single(dev->dev.parent, skb->data, skb->len,
 				    DMA_TO_DEVICE);
 
+	skb_tx_timestamp(skb);
 	bcom_submit_next_buffer(priv->tx_dmatsk, skb);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -434,7 +435,8 @@  static irqreturn_t mpc52xx_fec_rx_interrupt(int irq, void *dev_id)
 		length = status & BCOM_FEC_RX_BD_LEN_MASK;
 		skb_put(rskb, length - 4);	/* length without CRC32 */
 		rskb->protocol = eth_type_trans(rskb, dev);
-		netif_rx(rskb);
+		if (!skb_defer_rx_timestamp(skb))
+			netif_rx(rskb);
 
 		spin_lock(&priv->lock);
 	}