ARC: Remove 0x prefix from unit-address of node names
diff mbox series

Message ID 20181208070101.6117-1-abrodkin@synopsys.com
State New
Headers show
Series
  • ARC: Remove 0x prefix from unit-address of node names
Related show

Commit Message

Alexey Brodkin Dec. 8, 2018, 7:01 a.m. UTC
Done automatically with help of:
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------

Inspired by [1] and the like.

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
 arch/arc/boot/dts/abilis_tb10x.dtsi   |  4 ++--
 arch/arc/boot/dts/axc001.dtsi         |  6 +++---
 arch/arc/boot/dts/axc003.dtsi         | 14 +++++++-------
 arch/arc/boot/dts/axc003_idu.dtsi     | 14 +++++++-------
 arch/arc/boot/dts/axs10x_mb.dtsi      | 22 +++++++++++-----------
 arch/arc/boot/dts/vdk_axc003.dtsi     |  4 ++--
 arch/arc/boot/dts/vdk_axc003_idu.dtsi |  4 ++--
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi  | 14 +++++++-------
 8 files changed, 41 insertions(+), 41 deletions(-)

Comments

Rob Herring Dec. 10, 2018, 1:30 p.m. UTC | #1
On Sat, Dec 8, 2018 at 1:01 AM Alexey Brodkin
<alexey.brodkin@synopsys.com> wrote:
>
> Done automatically with help of:
> ----------------------->8------------------------
> sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
> ----------------------->8------------------------
>
> Inspired by [1] and the like.
>
> [1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Rob Herring <robh+dt@kernel.org>
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> ---
>  arch/arc/boot/dts/abilis_tb10x.dtsi   |  4 ++--
>  arch/arc/boot/dts/axc001.dtsi         |  6 +++---
>  arch/arc/boot/dts/axc003.dtsi         | 14 +++++++-------
>  arch/arc/boot/dts/axc003_idu.dtsi     | 14 +++++++-------
>  arch/arc/boot/dts/axs10x_mb.dtsi      | 22 +++++++++++-----------
>  arch/arc/boot/dts/vdk_axc003.dtsi     |  4 ++--
>  arch/arc/boot/dts/vdk_axc003_idu.dtsi |  4 ++--
>  arch/arc/boot/dts/vdk_axs10x_mb.dtsi  | 14 +++++++-------
>  8 files changed, 41 insertions(+), 41 deletions(-)
>
> diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
> index 3121536b25a3..77ac1368a65b 100644
> --- a/arch/arc/boot/dts/abilis_tb10x.dtsi
> +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
> @@ -178,7 +178,7 @@
>                         clocks = <&ahb_clk>;
>                 };
>
> -               spi0: spi@0xFE010000 {
> +               spi0: spi@FE010000 {

This should be lowercase too.

>                         #address-cells = <1>;
>                         #size-cells = <0>;
>                         cell-index = <0>;

[...]

> @@ -119,7 +119,7 @@
>          * This node is intentionally put outside of MB above becase
>          * it maps areas outside of MB's 0xEz-0xFz.
>          */
> -       uio_ev: uio@0xD0000000 {
> +       uio_ev: uio@D0000000 {

lowercase

>                 compatible = "generic-uio";
>                 reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
>                 reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
> --
> 2.16.2
>
Alexey Brodkin Dec. 10, 2018, 1:32 p.m. UTC | #2
Hi Rob,

On Mon, 2018-12-10 at 07:30 -0600, Rob Herring wrote:
> On Sat, Dec 8, 2018 at 1:01 AM Alexey Brodkin
> <alexey.brodkin@synopsys.com> wrote:
> > Done automatically with help of:
> > ----------------------->8------------------------
> > sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
> > ----------------------->8------------------------
> > 
> > Inspired by [1] and the like.
> > 
> > [1] 
> > https://urldefense.proofpoint.com/v2/url?u=http-3A__kisskb.ellerman.id.au_kisskb_buildresult_13612017_&d=DwIBaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=zx_mJ5GzAMI32-iqcXZiL8Qzrg79Dz4cxNF72VYhQl0&s=JwbFcFmnJRECl_z7jQGl0687UpORq9395mgRbo1OwFE&e=
> > 
> > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > 
> > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > ---
> >  arch/arc/boot/dts/abilis_tb10x.dtsi   |  4 ++--
> >  arch/arc/boot/dts/axc001.dtsi         |  6 +++---
> >  arch/arc/boot/dts/axc003.dtsi         | 14 +++++++-------
> >  arch/arc/boot/dts/axc003_idu.dtsi     | 14 +++++++-------
> >  arch/arc/boot/dts/axs10x_mb.dtsi      | 22 +++++++++++-----------
> >  arch/arc/boot/dts/vdk_axc003.dtsi     |  4 ++--
> >  arch/arc/boot/dts/vdk_axc003_idu.dtsi |  4 ++--
> >  arch/arc/boot/dts/vdk_axs10x_mb.dtsi  | 14 +++++++-------
> >  8 files changed, 41 insertions(+), 41 deletions(-)
> > 
> > diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
> > index 3121536b25a3..77ac1368a65b 100644
> > --- a/arch/arc/boot/dts/abilis_tb10x.dtsi
> > +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
> > @@ -178,7 +178,7 @@
> >                         clocks = <&ahb_clk>;
> >                 };
> > 
> > -               spi0: spi@0xFE010000 {
> > +               spi0: spi@FE010000 {
> 
> This should be lowercase too.
> 
> >                         #address-cells = <1>;
> >                         #size-cells = <0>;
> >                         cell-index = <0>;
> 
> [...]
> 
> > @@ -119,7 +119,7 @@
> >          * This node is intentionally put outside of MB above becase
> >          * it maps areas outside of MB's 0xEz-0xFz.
> >          */
> > -       uio_ev: uio@0xD0000000 {
> > +       uio_ev: uio@D0000000 {
> 
> lowercase
> 
> >                 compatible = "generic-uio";
> >                 reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;

I guess real addresses should be lower-case too, right?

-Alexey

Patch
diff mbox series

diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index 3121536b25a3..77ac1368a65b 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -178,7 +178,7 @@ 
 			clocks = <&ahb_clk>;
 		};
 
-		spi0: spi@0xFE010000 {
+		spi0: spi@FE010000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
@@ -189,7 +189,7 @@ 
 			interrupts = <26 8>;
 			clocks = <&ahb_clk>;
 		};
-		spi1: spi@0xFE011000 {
+		spi1: spi@FE011000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <1>;
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index fdc266504ada..37be3bf03ad6 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -41,7 +41,7 @@ 
 		 * this GPIO block ORs all interrupts on CPU card (creg,..)
 		 * to uplink only 1 IRQ to ARC core intc
 		 */
-		dw-apb-gpio@0x2000 {
+		dw-apb-gpio@2000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = < 0x2000 0x80 >;
 			#address-cells = <1>;
@@ -60,7 +60,7 @@ 
 			};
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <33333000>;
@@ -88,7 +88,7 @@ 
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index d75d65ddf8e3..ffa208a57a0a 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -55,7 +55,7 @@ 
 		 * this GPIO block ORs all interrupts on CPU card (creg,..)
 		 * to uplink only 1 IRQ to ARC core intc
 		 */
-		dw-apb-gpio@0x2000 {
+		dw-apb-gpio@2000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = < 0x2000 0x80 >;
 			#address-cells = <1>;
@@ -74,7 +74,7 @@ 
 			};
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <33333000>;
@@ -102,19 +102,19 @@ 
 	 * external DMA buffer located outside of IOC aperture.
 	 */
 	axs10x_mb {
-		ethernet@0x18000 {
+		ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			dma-coherent;
 		};
 
-		ohci@0x60000 {
+		ohci@60000 {
 			dma-coherent;
 		};
 
-		mmc@0x15000 {
+		mmc@15000 {
 			dma-coherent;
 		};
 	};
@@ -132,7 +132,7 @@ 
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index a05bb737ea63..ad795748ac63 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -62,7 +62,7 @@ 
 		 * this GPIO block ORs all interrupts on CPU card (creg,..)
 		 * to uplink only 1 IRQ to ARC core intc
 		 */
-		dw-apb-gpio@0x2000 {
+		dw-apb-gpio@2000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = < 0x2000 0x80 >;
 			#address-cells = <1>;
@@ -81,7 +81,7 @@ 
 			};
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <33333000>;
@@ -109,19 +109,19 @@ 
 	 * external DMA buffer located outside of IOC aperture.
 	 */
 	axs10x_mb {
-		ethernet@0x18000 {
+		ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			dma-coherent;
 		};
 
-		ohci@0x60000 {
+		ohci@60000 {
 			dma-coherent;
 		};
 
-		mmc@0x15000 {
+		mmc@15000 {
 			dma-coherent;
 		};
 	};
@@ -138,7 +138,7 @@ 
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 37bafd44e36d..4ead6dc9af2f 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -72,7 +72,7 @@ 
 			};
 		};
 
-		gmac: ethernet@0x18000 {
+		gmac: ethernet@18000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@ 
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@0x60000 {
+		ohci@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
@@ -118,7 +118,7 @@ 
 		 * dw_mci_pltfm_prepare_command() is used in generic platform
 		 * code.
 		 */
-		mmc@0x15000 {
+		mmc@15000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = < 0x15000 0x400 >;
 			fifo-depth = < 16 >;
@@ -129,7 +129,7 @@ 
 			bus-width = < 4 >;
 		};
 
-		uart@0x20000 {
+		uart@20000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x20000 0x100>;
 			clock-frequency = <33333333>;
@@ -139,7 +139,7 @@ 
 			reg-io-width = <4>;
 		};
 
-		uart@0x21000 {
+		uart@21000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x21000 0x100>;
 			clock-frequency = <33333333>;
@@ -150,7 +150,7 @@ 
 		};
 
 		/* UART muxed with USB data port (ttyS3) */
-		uart@0x22000 {
+		uart@22000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x22000 0x100>;
 			clock-frequency = <33333333>;
@@ -160,7 +160,7 @@ 
 			reg-io-width = <4>;
 		};
 
-		i2c@0x1d000 {
+		i2c@1d000 {
 			compatible = "snps,designware-i2c";
 			reg = <0x1d000 0x100>;
 			clock-frequency = <400000>;
@@ -177,7 +177,7 @@ 
 			#sound-dai-cells = <0>;
 		};
 
-		i2c@0x1f000 {
+		i2c@1f000 {
 			compatible = "snps,designware-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,13 +218,13 @@ 
 				};
 			};
 
-			eeprom@0x54{
+			eeprom@54{
 				compatible = "atmel,24c01";
 				reg = <0x54>;
 				pagesize = <0x8>;
 			};
 
-			eeprom@0x57{
+			eeprom@57{
 				compatible = "atmel,24c04";
 				reg = <0x57>;
 				pagesize = <0x8>;
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index 0fd6ba985b16..84e8766c8ca2 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -36,7 +36,7 @@ 
 			#interrupt-cells = <1>;
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <2403200>;
@@ -49,7 +49,7 @@ 
 
 	};
 
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 28956f9a9f3d..eb7e705e8a27 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -44,7 +44,7 @@ 
 			#interrupt-cells = <1>;
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <2403200>;
@@ -57,7 +57,7 @@ 
 
 	};
 
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 48bb4b4cd234..ad18daa7b307 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -36,7 +36,7 @@ 
 			};
 		};
 
-		ethernet@0x18000 {
+		ethernet@18000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@ 
 			clock-names = "stmmaceth";
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		uart@0x20000 {
+		uart@20000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x20000 0x100>;
 			clock-frequency = <2403200>;
@@ -65,7 +65,7 @@ 
 			reg-io-width = <4>;
 		};
 
-		uart@0x21000 {
+		uart@21000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x21000 0x100>;
 			clock-frequency = <2403200>;
@@ -75,7 +75,7 @@ 
 			reg-io-width = <4>;
 		};
 
-		uart@0x22000 {
+		uart@22000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x22000 0x100>;
 			clock-frequency = <2403200>;
@@ -101,7 +101,7 @@ 
 			interrupt-names = "arc_ps2_irq";
 		};
 
-		mmc@0x15000 {
+		mmc@15000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x15000 0x400>;
 			fifo-depth = <1024>;
@@ -119,7 +119,7 @@ 
 	 * This node is intentionally put outside of MB above becase
 	 * it maps areas outside of MB's 0xEz-0xFz.
 	 */
-	uio_ev: uio@0xD0000000 {
+	uio_ev: uio@D0000000 {
 		compatible = "generic-uio";
 		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
 		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";