@@ -146,40 +146,8 @@ static void rcar_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
pm_runtime_put(chip->dev);
}
-static int rcar_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static int rcar_pwm_enable(struct rcar_pwm_chip *rp)
{
- struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
- int div, ret;
-
- div = rcar_pwm_get_clock_division(rp, period_ns);
- if (div < 0)
- return div;
-
- /*
- * Let the core driver set pwm->period if disabled and duty_ns == 0.
- * But, this driver should prevent to set the new duty_ns if current
- * duty_cycle is not set
- */
- if (!pwm_is_enabled(pwm) && !duty_ns && !pwm->state.duty_cycle)
- return 0;
-
- rcar_pwm_update(rp, RCAR_PWMCR_SYNC, RCAR_PWMCR_SYNC, RCAR_PWMCR);
-
- rcar_pwm_calc_counter(rp, div, duty_ns, period_ns);
- ret = rcar_pwm_set_counter(rp);
- if (!ret)
- rcar_pwm_set_clock_control(rp, div);
-
- /* The SYNC should be set to 0 even if rcar_pwm_set_counter failed */
- rcar_pwm_update(rp, RCAR_PWMCR_SYNC, 0, RCAR_PWMCR);
-
- return ret;
-}
-
-static int rcar_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
u32 value;
/* Don't enable the PWM device if CYC0 or PH0 is 0 */
@@ -193,10 +161,8 @@ static int rcar_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return 0;
}
-static void rcar_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void rcar_pwm_disable(struct rcar_pwm_chip *rp)
{
- struct rcar_pwm_chip *rp = to_rcar_pwm_chip(chip);
-
rcar_pwm_update(rp, RCAR_PWMCR_EN0, 0, RCAR_PWMCR);
}
@@ -221,10 +187,10 @@ static int rcar_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
rcar_pwm_update(rp, RCAR_PWMCR_SYNC, 0, RCAR_PWMCR);
if (!ret && state->enabled)
- ret = rcar_pwm_enable(chip, pwm);
+ ret = rcar_pwm_enable(rp);
if (!state->enabled) {
- rcar_pwm_disable(chip, pwm);
+ rcar_pwm_disable(rp);
ret = 0;
}
@@ -234,9 +200,6 @@ static int rcar_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
static const struct pwm_ops rcar_pwm_ops = {
.request = rcar_pwm_request,
.free = rcar_pwm_free,
- .config = rcar_pwm_config,
- .enable = rcar_pwm_enable,
- .disable = rcar_pwm_disable,
.apply = rcar_pwm_apply,
.owner = THIS_MODULE,
};
This patch removes legacy APIs. Since rcar_pwm_{en,dis}able() functions are reused on "atomic" API, this patch changes the arguments of these functions. No change in behavior. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/pwm/pwm-rcar.c | 45 ++++----------------------------------------- 1 file changed, 4 insertions(+), 41 deletions(-)