[U-Boot,v2,5/5] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor

Message ID 20181206095122.7117-6-narmstrong@baylibre.com
State New
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series
  • spi-flash: switch to "jedec, spi-nor" binding
Related show

Commit Message

Neil Armstrong Dec. 6, 2018, 9:51 a.m.
Since all DTS files has been switched to "jedec,spi-nor", remove
the "spi-flash" compatible from the bindings examples.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 2 +-
 doc/device-tree-bindings/spi/spi-atcspi200.txt               | 2 +-
 doc/device-tree-bindings/spi/spi-stm32-qspi.txt              | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

Patch

diff --git a/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index a1b559668f..a376c6fba5 100644
--- a/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -42,7 +42,7 @@  Example:
 		status = "okay";
 
 		spi_flash@0 {
-			compatible = "spi-flash";
+			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <50000000>;
 		};
diff --git a/doc/device-tree-bindings/spi/spi-atcspi200.txt b/doc/device-tree-bindings/spi/spi-atcspi200.txt
index 9c0630b500..e67b3425f0 100644
--- a/doc/device-tree-bindings/spi/spi-atcspi200.txt
+++ b/doc/device-tree-bindings/spi/spi-atcspi200.txt
@@ -28,7 +28,7 @@  Example:
 		clocks = <&spiclk>;
 		interrupts = <3 4>;
 		flash@0 {
-			compatible = "spi-flash";
+			compatible = "jedec,spi-nor";
 			spi-max-frequency = <50000000>;
 			reg = <0>;
 			spi-cpol;
diff --git a/doc/device-tree-bindings/spi/spi-stm32-qspi.txt b/doc/device-tree-bindings/spi/spi-stm32-qspi.txt
index 6c7da1d76c..cec3e1250c 100644
--- a/doc/device-tree-bindings/spi/spi-stm32-qspi.txt
+++ b/doc/device-tree-bindings/spi/spi-stm32-qspi.txt
@@ -29,7 +29,7 @@  Example:
 		qflash0: n25q128a {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "micron,n25q128a13", "spi-flash";
+			compatible = "micron,n25q128a13", "jedec,spi-nor";
 			spi-max-frequency = <108000000>;
 			spi-tx-bus-width = <4>;
 			spi-rx-bus-width = <4>;