[U-Boot,v2,1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU

Message ID 20181205175136.27119-2-afd@ti.com
State New
Delegated to: Tom Rini
Headers show
Series
  • Add USB boot to HS DRA7xx/AM57xx
Related show

Commit Message

Andrew F. Davis Dec. 5, 2018, 5:51 p.m.
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same
meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT
to allow for cleaner use in code.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/cpu/armv8/zynqmp/spl.c   | 2 +-
 arch/arm/mach-omap2/boot-common.c | 2 +-
 common/Makefile                   | 4 ++--
 common/spl/Kconfig                | 6 +++---
 common/spl/Makefile               | 2 +-
 common/spl/spl_ram.c              | 4 ++--
 drivers/Makefile                  | 2 +-
 drivers/usb/gadget/Makefile       | 2 +-
 include/configs/dra7xx_evm.h      | 2 +-
 include/configs/xilinx_zynqmp.h   | 4 ++--
 10 files changed, 15 insertions(+), 15 deletions(-)

Comments

Tom Rini Dec. 6, 2018, 9:40 p.m. | #1
On Wed, Dec 05, 2018 at 11:51:30AM -0600, Andrew F. Davis wrote:

> The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same
> meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT
> to allow for cleaner use in code.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>

Patch

diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c
index 01f31d0f0e..fb3955c93f 100644
--- a/arch/arm/cpu/armv8/zynqmp/spl.c
+++ b/arch/arm/cpu/armv8/zynqmp/spl.c
@@ -93,7 +93,7 @@  u32 spl_boot_device(void)
 	case EMMC_MODE:
 		return BOOT_DEVICE_MMC1;
 #endif
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
 	case USB_MODE:
 		return BOOT_DEVICE_DFU;
 #endif
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 176d4f67cb..2db19227b9 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -108,7 +108,7 @@  void save_omap_boot_params(void)
 			sys_boot_device = 1;
 			break;
 #endif
-#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
 		case BOOT_DEVICE_DFU:
 			sys_boot_device = 1;
 			break;
diff --git a/common/Makefile b/common/Makefile
index 65d89dc62d..69cec69608 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -64,10 +64,10 @@  obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
 obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
 
 ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_DFU_SUPPORT
+ifdef CONFIG_SPL_DFU
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 endif
-obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
+obj-$(CONFIG_SPL_DFU) += cli_hush.o
 obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 0ddbffc7d1..8dec080deb 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -790,7 +790,7 @@  config SPL_USB_ETHER
 	  since the network stack uses a number of environment variables.
 	  See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
 
-config SPL_DFU_SUPPORT
+config SPL_DFU
 	bool "Support DFU (Device Firmware Upgrade)"
 	select SPL_HASH_SUPPORT
 	select SPL_DFU_NO_RESET
@@ -805,11 +805,11 @@  config SPL_DFU_SUPPORT
 
 choice
 	bool "DFU device selection"
-	depends on SPL_DFU_SUPPORT
+	depends on SPL_DFU
 
 config SPL_DFU_RAM
 	bool "RAM device"
-	depends on SPL_DFU_SUPPORT && SPL_RAM_SUPPORT
+	depends on SPL_DFU && SPL_RAM_SUPPORT
 	help
 	 select RAM/DDR memory device for loading binary images
 	 (u-boot/kernel) to the selected device partition using
diff --git a/common/spl/Makefile b/common/spl/Makefile
index a130a5be4b..6f8d7599ae 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -26,7 +26,7 @@  obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
 obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
 obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
 obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
-obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o
+obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
 obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
 obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
 obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c
index 5fcc3b1504..954e91a004 100644
--- a/common/spl/spl_ram.c
+++ b/common/spl/spl_ram.c
@@ -35,7 +35,7 @@  static int spl_ram_load_image(struct spl_image_info *spl_image,
 
 	header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
 
-#if CONFIG_IS_ENABLED(DFU_SUPPORT)
+#if CONFIG_IS_ENABLED(DFU)
 	if (bootdev->boot_device == BOOT_DEVICE_DFU)
 		spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0");
 #endif
@@ -76,7 +76,7 @@  static int spl_ram_load_image(struct spl_image_info *spl_image,
 #if CONFIG_IS_ENABLED(RAM_DEVICE)
 SPL_LOAD_IMAGE_METHOD("RAM", 0, BOOT_DEVICE_RAM, spl_ram_load_image);
 #endif
-#if CONFIG_IS_ENABLED(DFU_SUPPORT)
+#if CONFIG_IS_ENABLED(DFU)
 SPL_LOAD_IMAGE_METHOD("DFU", 0, BOOT_DEVICE_DFU, spl_ram_load_image);
 #endif
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 55de10926e..7fe80b1d72 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -48,7 +48,7 @@  obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
+obj-$(CONFIG_SPL_DFU) += dfu/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index b74c1fdce9..b5bc59eecb 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,7 +8,7 @@  obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o
-obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
+obj-$(CONFIG_SPL_DFU) += f_dfu.o
 obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
 endif
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 2d8758db75..f36a9c3e08 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -53,7 +53,7 @@ 
 
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_CMD_BOOTD
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
 #define DFUARGS \
 	"dfu_bufsiz=0x10000\0" \
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 0ab32611ce..7a9b06ec4c 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -183,7 +183,7 @@ 
 #endif
 
 /* SPL can't handle all huge variables - define just DFU */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 #undef CONFIG_EXTRA_ENV_SETTINGS
 # define CONFIG_EXTRA_ENV_SETTINGS \
 	"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
@@ -228,7 +228,7 @@ 
 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #endif
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
 # undef CONFIG_CMD_BOOTD
 # define CONFIG_SPL_ENV_SUPPORT
 # define CONFIG_SPL_HASH_SUPPORT