diff mbox series

[Cosmic,1/1] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub

Message ID 20181205094116.23265-3-kai.heng.feng@canonical.com
State New
Headers show
Series Fix Terminus USB hub that may breaks connected USB devices after S3 | expand

Commit Message

Kai-Heng Feng Dec. 5, 2018, 9:41 a.m. UTC 
BugLink: https://bugs.launchpad.net/bugs/1806850

Devices connected under Terminus Technology Inc. Hub (1a40:0101) may
fail to work after the system resumes from suspend:
[  206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd
[  206.143691] usb 3-2.4: device descriptor read/64, error -32
[  206.351671] usb 3-2.4: device descriptor read/64, error -32

Info for this hub:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1a40 ProdID=0101 Rev=01.11
S:  Product=USB 2.0 Hub
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

Some expirements indicate that the USB devices connected to the hub are
innocent, it's the hub itself is to blame. The hub needs extra delay
time after it resets its port.

Hence wait for extra delay, if the device is connected to this quirky
hub.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 781f0766cc41a9dd2e5d118ef4b1d5d89430257b)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 Documentation/admin-guide/kernel-parameters.txt |  2 ++
 drivers/usb/core/hub.c                          | 14 +++++++++++---
 drivers/usb/core/quirks.c                       |  6 ++++++
 include/linux/usb/quirks.h                      |  3 +++
 4 files changed, 22 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9587a2f1137e..1d8aba0bed2c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4614,6 +4614,8 @@ 
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1fb266809966..16a592c73876 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2791,6 +2791,7 @@  static int hub_port_reset(struct usb_hub *hub, int port1,
 	int i, status;
 	u16 portchange, portstatus;
 	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int reset_recovery_time;
 
 	if (!hub_is_superspeed(hub->hdev)) {
 		if (warm) {
@@ -2882,11 +2883,18 @@  static int hub_port_reset(struct usb_hub *hub, int port1,
 
 done:
 	if (status == 0) {
-		/* TRSTRCY = 10 ms; plus some extra */
 		if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM)
 			usleep_range(10000, 12000);
-		else
-			msleep(10 + 40);
+		else {
+			/* TRSTRCY = 10 ms; plus some extra */
+			reset_recovery_time = 10 + 40;
+
+			/* Hub needs extra delay after resetting its port. */
+			if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
+				reset_recovery_time += 100;
+
+			msleep(reset_recovery_time);
+		}
 
 		if (udev) {
 			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 178d6c6063c0..4d7d948eae63 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -128,6 +128,9 @@  static int quirks_param_set(const char *val, const struct kernel_param *kp)
 			case 'n':
 				flags |= USB_QUIRK_DELAY_CTRL_MSG;
 				break;
+			case 'o':
+				flags |= USB_QUIRK_HUB_SLOW_RESET;
+				break;
 			/* Ignore unrecognized flag characters */
 			}
 		}
@@ -380,6 +383,9 @@  static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Terminus Technology Inc. Hub */
+	{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
+
 	/* Corsair K70 RGB */
 	{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index b7a99ce56bc9..a1be64c9940f 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -66,4 +66,7 @@ 
 /* Device needs a pause after every control message. */
 #define USB_QUIRK_DELAY_CTRL_MSG		BIT(13)
 
+/* Hub needs extra delay after resetting its port. */
+#define USB_QUIRK_HUB_SLOW_RESET		BIT(14)
+
 #endif /* __LINUX_USB_QUIRKS_H */