diff mbox series

[2/4] video: ssd1307fb: Do not hard code active-low reset sequence

Message ID 1543935806-94880-3-git-send-email-michal.vokac@ysoft.com
State Not Applicable, archived
Headers show
Series Fix ssd1307fb OLED driver reset | expand

Checks

Context Check Description
robh/checkpatch warning "total: 0 errors, 1 warnings, 12 lines checked"

Commit Message

Michal Vokáč Dec. 4, 2018, 3:03 p.m. UTC 
The SSD130x OLED display reset signal is active low. Now the reset
sequence is implemented in such a way that users are forced to
define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.

Do not hard code the active-low sequence into the driver but instead
allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
the real world.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
 drivers/video/fbdev/ssd1307fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 4061a20..3b361bc 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -667,10 +667,10 @@  static int ssd1307fb_probe(struct i2c_client *client,
 
 	if (par->reset) {
 		/* Reset the screen */
-		gpiod_set_value_cansleep(par->reset, 0);
-		udelay(4);
 		gpiod_set_value_cansleep(par->reset, 1);
 		udelay(4);
+		gpiod_set_value_cansleep(par->reset, 0);
+		udelay(4);
 	}
 
 	if (par->vbat_reg) {